We are manufacturer, supplier & exporter of Double Reduction Worm Gear Box gives a minimum of 75:1 and maximum of 4900:1 ratio to meet the requirement of slow moving machinery. It is available in under-driven, over-driven and vertical assembled condition. 

Our range of geared motors is made of superior quality and closely grained cast iron. These are elegantly looking and have sturdy designs. The joints are machined to make the casting oil tight and dust proof. These are made of alloy steel duly hardened. We offer Helical Geared Motors with Solid Output Shaft & Hollow Output Shaft and Heliworm Geared Motors with Solid Output Shaft & Hollow Output Shaft. These motors are supplied under the brand name PBL.

We provide our valued customers with wide range of electric motors which include Electric motors (3 PH & 1 PH) and Flameproof Motors (3 PH & 1 PH). These products are available in the brand name of Crompton greaves.

We supply genuine quality Electric Motors (3 PH & 1 PH) which are sourced from the renowned vendors in the market. Our clients can avail these motors at economical rates.

We supply a wide range of gear boxes which include Worm gear boxes, double reduction gear boxes and hollow shaft gear boxes. These are gear boxes are available under the brand name of Elecon. These high quality products can be availed at cost effective prices and in bulk orders.

We provide our valued customers with wide range of electric pumps which include Monoblock Pumps (1PH & 3PH) and Domestic Pumps (1PH & 3PH). These products are available in the brand name of Crompton greaves.

Industrial motors are available from frame sizes 56 to 315 in 2, 4, 6 & 8 pole designs. The motors are suitable for continuous (S1) duty with ambient temperature of 45*C & site altitudes of upto 1000 meters above mean sea level. 

VOLTAGE & FREQUENCY : 
Motors are designined for 3 phase, 415v, 10% & 50Hz,  5% with combined variation of 10% any other voltage & or frequency is available on request.
 
STANDARDS :    
Motors conforms to IS:325, IEC 34, Part 1 & BS 4999 for electrical specifications & IS:1231 for mechanical dimensions.

TERMINAL BOX POSITION :
Standard location of the terminal  box is on top. However for frame sizes 90 to 315, the terminal box on right or left side can provided on requested. The terminal box can be rotated in steps of 90* in each position.

PROTECTION :
The motors are designed with class F  insulation & IP55 degree of protection as per IS:4691 & IEC 34, part 5.

CONNECTION:
Motors upto 2HP are star connected with 3 leads & from 3 HP onwords they are delta conected with 6 leads.

The range of Geared Motors offered by us are fabricated using superior quality grained cast iron. Used in various high speed operations, these are known for durability, compact design and low maintenance. The joints are oiled to function smoothly and long lasting. These are corrosion and abrasion resistant and are high in performance. Applicable in areas like steel, automobile, aerospace and automotive industry, the motors are supplied under the brand name of PBL.

HINDUSTAN GEARED MOTORS

• “Hindustan” a leading electric motor manufacturer in INDIA producing more than 250,000 3 phase motors at 4 different manufacturing locations.
• As a forward integration, we are now introducing new “W” series, worm geared motors having range of 0.125 to 20.0 HP (upto 1,000 Nm).
• These geared motors have footprints similar to world renowned make.

GEAR CASE

The gear case and end covers are made of high quality aluminum alloy, light weight & non-rusting. The components are accurately machined so as to be fully oil tight and dust proof. The design of housings provides a great amount of torsional rigidity and noise absorption.

WORM SHAFT AND WORM WHEEL

Worm shaft is made from special alloy steels hardened and profile ground to the highest standard and checked to be free from all possible
defects and errors. Worm wheel is made of phospore bronze

SHAFTS AND BEARINGS

Output shaft is made out of plain carbon steel and accurately machined to close limits. Bearings are adequately selected to ensure longerlife, smooth operation and to withstand high fatigue and shock loads.

ELECTRICALS

• “Hindustan” Geared Motors are fitted with “Hindustan” TEFC squirrel cage induction motors suitable for 415 volts, 3 phase, 50 Hz AC Supply having IP55 protection as per IS:325 with class F insulation.
• Special purpose motors such as brake motors, multispeed motors and motors with alternate protection and class of insulation can also be provided on request.

TESTING

• All components undergo strict quality control checks at various stages of production. The assembled units are finally tested for noise, oil level and temperature rise.
• The result leads to a robust, compact & smooth running unit which has a longer life and requires minimum maintenance.

The Brake Motors offered by us are used where instant stopping of driven load is required. It is the combination of an electromagnetic AC or DC brake and an A.C. induction motor. These are simple, durable and rugged and are easy to maintain. Separate DC supply is not required as rectifier is provided inside the main terminal box to supply the required DC voltage for the brakes. The motor finds application in textile machinery, cranes & hoists, machine tools, printing machinery, rolling mills and material handling equipment.

CONSTRUCTION:
MODEL:

Brake Motors are used for various applications where instantaneous stopping of the driven load is required. The operation of the brake is “FAIL SAFE TYPE” i.e. normally ON. When the electrical power to the motor is cut–off or the power fails, the brake is applied. Brake motor is a combination of an A.C. induction motor and an electromagnetic AC or DC brake. The electromagnetic brake is mounted on the non–driving end of the motor. DC brake motors are provided with a rectifier which provides the required DC voltage to the brake coil which in turn operates the brake. The supply to the rectifier is fed from any two terminals(between any two phases) in the main terminal box of the motor. General applications of Brake motors are printing machinery, textile machinery, rolling mills, cranes & hoists, material handling equipments, machine tools etc.

WORKING:

When the power to the motor is switched off, a braking torque is generated which presses the armature plate of the brake against the mounting flange. When the supply resumes, a magnetic field is produced in the brake coil and this pulls the armature plate against the spring force and the shaft is now free to rotate.

RANGE OF HINDUSTAN BRAND BRAKE MOTORS:

• KW: 0.093 to 15.0 kW
• RPM: 3000, 1500, 1000, 750
• Mounting: Foot (B3), flange (B5), face (B14) & combinations
• Frame: 63 to 160L
• Voltage: 415V or as required
• Frequency: 50Hz
• Braking torque: Upto 250Nm
• Brake coil voltage: 190V DC (Other voltages on request)
• Degree of protection: IP54
• Duty cycle: S1 – S8

SPECIAL FEATURES:

• The brake motors are simple & rugged & so easy for maintenance.
• No separate DC supply is required as the rectifier is provided which gives the required DC voltage for energisation of the brake.
• The rectifier is mounted inside the main terminal box so no separate terminal box required.

We offer Flame Proof Motors  in which the flame proof enclosures consists of cast iron parts that are very liberally designed. These are designed in such manner that the frame temperature will remain below the ignition temperature of gas-air mixture. The joints are carefully machined and rigidly inspected to ensure that gaps does not exceeds. These motors finds application in various industries including refineries, coal mines and petrochemicals.

RANGE:

HINDUSTAN flameproof motors Ex‘d’ are available from frame sizes 63 FLP to 280M FLP in 2, 4, 6 & 8 pole designs. The motors are suitable for continuous duty (S1), ignition groups G1 to G4 or temperature class T1 to T4 as per IS 6381 with ambient temperature of 45ºC & site altitudes of upto 1000 meters above mean sea level.

DESIGN FEATURES

The flameproof enclosure consists of sturdy cast iron parts, which are mechanically robust & very liberally designed. The cast iron enclosure of motors is built to withstand any internal explosion. The gaps of joints & where the shaft passes through the frame are so dimensioned as to prevent transmission of igniting flame to the surrounding atmosphere. The motors are so designed that the frame temperature will remain below the ignition temperature of the gas-air mixture involved. All cast iron parts forming the flameproof enclosure are tested at 14kg/cm2 (required 10kg/cm2) hydraulic pressure. All the seats of joints are carefully machined to strict tolerances & rigidly inspected to ensure that the permissible gaps are not exceeded. Flameproof motors are manufactured to serve the industries such as coalmines, refineries, petro-chemical industries where flammable gases, vapours, fumes & coal dust are natural atmospheric hazards. The motors comply with Indian Standard IS: 2148-1981 for gas groups I, IIA, IIB & IIC. These motors can be used in all divisions I & certain division II areas as laid down in guide for selection of electrical equipment in hazardous area as per IS: 5571-1979.

The Crane Duty Motors are there for the frequent starts, stops and revising required in lifts and cranes. The components that framed the motor are accurately aligned. These are durable and corrosion and abrasion resistant and are high in performance and long lasting. The crane motors are designed under the brand name of “Hindustan” and are applicable in weirs & sluices, auxiliary motors in rolling mills and in material handling.

APPLICATION:

“Hindustan” brand crane duty motors are specially designed for frequent starts/stops & reversing required in cranes & lifts of all types. They can also be used in applications such as material handling, weirs & sluices, auxiliary motors in rolling mills or wherever intermittent drives are required.

CONSTRUCTION:

Castings: “Hindustan” crane duty motors’ housings & endshields are made from high quality castings as per IS: 210. All components are machined to correct accuracy & alignment. Stampings: The stampings are made from low loss high permeability steel.

We offer Cooling Tower Motors that are totally enclosed flange mounted motors used in refrigeration and air conditioning industries. These motors are provided with long shaft construction with external threaded end that directly mount the fan blades. This shaft construction further helps in the better cooling of motor. Compact design and low weight facilitates easy maintenance. These are available in standard as well as customized designs.

INTRODUCTION:

‘HINDUSTAN’ Cooling tower motors are specially designed flange mounted motors in totally enclosed construction to suit air conditioning & refrigeration industries. They are provided with special long shaft construction with external threaded end to directly mount the fan blades. This also helps in the better cooling of the motor. Motors are compact in design & less in weight to facilitate easy maintenance. They are available as standard catalogue designs or as custom built.