Construction Machineries

Aluminum Soffit Formwork

TOPEC has tapped totally new dimensions in Soffit Formwork performance, TOPEC makes shuttering and stripping significantly quicker demonstrably more economic and appreciably more efficient than conventional systems,

This is because the TOPEC system operates with just two basic parts - panel and prop - enabling any Soffit Formwork to be erected simply and safely

Upto 0.9 m X 1.8 m panels are fitted and stripping with a maximum of two men working on the ground, and if speed is at a premium, the TOPEC lift is used. IT raises the panels hydraulically and  positions them accurately and flush up to a height of 5.7 m. It couldn't be quicker, as extensive time-and-motion studies have demonstrated on numerous construction sites.

Just three steps,
TOPEC is fitted in three steps, Hook it on, push it up & prop it. Stripping is carried out with the reverse procedure. Time- consuming preparation is never required. Since the small number of labor-saving maneuvers are quickly learnt, shuttering times of less than 0.2 h/m2 are achievable after only a brief period of familiarization.

Neat Results,
TOPEC creates neat results, both with regard to the finished ceilings and to the shuttering panels employed. TOPEC panels are connected so tightly together that only narrow joints are created and very little concrete residual is left on the panels.

Complete System
Apart from the 1.8 X 1.8 m basic panels, several smaller sizes, corner panels, infill panels and an adjustment panel are included in the TOPEC range so that any Soffit shape can be realized. For support, all the prop systems from our product range are suitable. Our tabular steel prop EUROPLUS new with the practical quick-lowering service, our aluminium frame props ID 110 and ID 140, and MODEX prop systems for greater to extreme heights. They merely have to be fitted with our TOPEC bearings.

Made of premium quality iron these shutters are used during construction of bridges. All these shutters keep the bridge intact and prevent them from moving during the construction. These shutters are easy to install and can even bear heavy loads.

All these shutters are widely demanded during bridge construction and are also rust resistant.

Along with our other products, we also offer premium quality steel couplers. They are widely used to connect lines of hydraulic or pneumatic systems without the loss of any fluid. Our couplers are reckoned for their durability and longer functioning life. Since they are corrosion resistant their application areas are diverse.
 
Our couplers have been categorized in the following manner:  

• Fixed/Right Angle Coupler (Drop Forged): This is a single piece forged coupler used for connecting two scaffold tubes at right angles to each other. Due to their sturdiness, they give optimal safety in load bearing applications and is availed in galvanized or paint finish.
  
• Swivel Couplers (Drop Forged): This can connect two scaffold tubes at different angles. Used for cross bracing this is designed for optimal safety; it is available in galvanized or paint finish.
• Fixed/Right Angle Coupler (Pressed Sheet Metal): This sheet metal pressed coupler is used to connect scaffold tubes at right angle to each other. We have developed this with an ability to withstand distortion along with slipping, it combines pressed components, EN-8 eye bolts and rivets for utmost strength.
• Swivel Couplers (Pressed Sheet Metal): This galvanized swivel couplers are used for connecting two scaffold tubes at any angles as well as ledger bracing. They are available in galvanized or paint finish.

 

Our high grade cuplock system has been designed with high strength grade verticals and horizontal tubes by drop forging. Along with that we also provide various components such as bottom cup, top cup and ledger ends. These are available in various sizes such as 3.0 m, 2.5 m, 2.0 m, 1.8 m, 1.5 m, 1.3 m, 1.2 m & 1.0 m. Hot  dipped galvanized surface is one of the feature of our cuplock system and find application in diverse forms of access and support structures in the construction industry.
 
Some of the specific features of our cuplock system are:

• Dimensional accuracy
• Easy to operate
• Simplified installation

We use wide array of material like stainless steel, bronze, nickel, titanium, monel, haste alloy to manufacture our range of  Laboratory equipments.

These are mainly used in pharmaceutical industry, pharmacy collage, colleges labs, chemical industries etc.

Our wide product range also includes scaffolding props which can be customized as per the requirement of our clients. We use TPI ACME square thread to ensure the load bearing strength and a hole boss on the collar nut which helps it to turn in small spaces. They are anti-corrosive which elongates its functioning life making them highly accepted and appreciated.
 
Below cited are some of the characteristic features of our scaffolding prop:

• There is a high tensile steel pin located through a slot in the outer section and a hole on the inner section used for coarse adjustment
• Standard special shores pins are also availed as per the requirement of our clients
• A hole boss on the collar nut makes its turning easy in confined spaces
• A self cleaning device on the collar nut automatically clears the thread of concrete and dirt where the nut is rotated ensuring hassle free adjustment
• The cast collar located below the pin allows fine adjustment for lending and striking
• Base plates and head plates are holed for use with slab from work
• TPI ACME square thread ensure load bearing strength at this critical point