Underground Storage Tanks (UST), are ideal for the storage of wide variety of liquids having specific gravity less than one. Tanks are suitable for storage of products under ambient temperature and atmospheric pressure conditions. Tanks are available in mild steel / stainless steel etc. They are available with flat ends as well as dish ends.
For corrosion protection, tanks are provided with two coats of zinc primer
and special surface asphalt doping. Tanks are manufactured as per IS : 10987 specification. Steel tanks made by Satjyot, are confirming to standards set by the explosive department.

Placement Method
The tank is placed under- ground. A masonry or concrete pit is packed around with sand, earth or clay leaving no air space between the tank and the pit. The tank is tied with anchor –fasteners on both sides. No part of the tank is visible.

Above ground storage tank(AGST)are manufactured usually for storing liquidsorgases. These are fabricated from materials and have different sizes and placement methods. Above ground tanks can be made in many shapes, but large dia tanks are usually cylindrical having flat bottoms. Those supported on towers, have either flat ends or dish ends. Tanks are provided with steel wear plates for installing them on a solid concrete pedestals or steel cradles as required. Above ground tanks are usually manufactured of mild steel, stainless steel or other metals as per the customer’s requirement. Tanks are manufactured as per IS : 10987 specification. For corrosion protection, tanks are provided with two coats of red zinc oxide paints and special surface enamel paints. Tanks manufactured by Satjyot, are confirming to standard covered by the explosive department.

Vertical tanks are steel atmospheric tanks for above ground storage of non-corrosive, stable, flammable and combustible liquids that have a specific gravity not exceeding that of water. Maximum allowable working pressure is 0.5 psi as measured from top of the tank. Tanks generally have flat bottoms and conical roofsAvailable in various specification & according to customers' requirements, we offer mild steel (M.S) & stainless steel (S.S.) vertical storage tank.

Processing storage tanks in accordance to construction codes including dairy, food & pharmaceutical hygiene standards, our storage tanks are featured with dished, flat or conical head. They are also featured with long lasting durability and also require less maintenance. They are also used in connection with boilers or other independent water heating sources to provide storage capacity to meet peak and normal system demands. Satjyot can incorporate dished tops, dish ends and coned bottom; all supported on skirts and legs as required.

Applicable to all styles, Satjyot also offer world class pressure vessels. We adhere to ASME code specifications for section VIII division (v), IS : 5500 , IS : 2825, IS : 803 API standards.

Our entire range of Pressure Vessel are manufactured in varying sizes and shapes and operating pressures. Designed to contain liquid, vapor or gas at a different pressure when compared to the atmospheric pressure and without change in the volume, our pressure vessels can be categorized as thinned wall pressure vessels, thick walled pressure vessels, transportable containers, and gas cylinders.

They have high Tensile strength and can withstand maximum stress. Made up of stainless/mild steel, they are highly applicable in petroleum refining, petrochemical industries, water treatment systems of boilers & & steam generation equipment etc.

Air receivers help to eliminate pulsations in discharges and act as storage vessels during intervals when demand for air exceeds the capacity of the compressor.

Selecting the right receiver for your compressor is important. Not all applications will suit a standard design receiver.

We manufacture and supply a large range of quality air receivers as per Design code IS : 2825, ranging between 50 litres and 10,000 litres. Satjyot manufacture air receivers in horizontal and vertical mountings, as per client's requirement.

The Asphalt storage tanks are used for bitumen storage. The tanks generally have a flat bottom fitted on a steel cradle. The tank is fully insulated to minimize heat losses. The bitumen inside the tank is heated by U -shaped heating tube fitted with automatic burner of adequate capacity. A jacketed Bitumen Pump driven by DC Variable Speed motor though Reduction Gear Box, is provided to Pump the Bitumen to the drum.The bitumen f-rate is controlled by varying the RPM of DC motor. The Bitumen Pump and all bitumen lines to and fro from the tank except pipe fittings and valves are oil-jacketed.

Features

* Glass wool insulation and covered with Aluminium GI sheet of suitable thickness.

* Tested tube nest for fire heat circulation.

* Thermic duct, man hole, lifting hooks, Breather pipe etc.
* Electronic / Mechanical High-pressure Jet burner.
* Heavy duty jacketed Asphalt pump.
* Thermometers etc.

Chimneys, which form the last component of the system using fuel such as boilers, plays a vital role in maintaining efficiency. Satjyot manufactures Mild Steel (M.S.) Chimneys as per their requirement. Our chimneys discharge fluid gases produced in the boiler, furnaces as a result of fuel combustion.

These Chimneys discharge fuel gases to such a height so that they do not create a nuisance to the surrounding environments, generally as per the recommendation of local pollution control board norms. Available in various heights, diameters and thickness, these chimneys are self-supported or guy rope supported. Provided with base plate, ladder, lightning arestor & flanges, these chimneys are mostly used in Boiler Exhaust, Generator Exhaust or Gas exhaust in Chemical plants and for removal of harmful gases/fumes from the process.

Satjyot designes and manufactures Chimneys that are safest and most durable. These are designed to provide easiest and simpler installations. With continuous innovations, we design our range of Industrial Chimneys, in accordance to the set international standards. The designs and construction standards of chimney is as per IS : 6533.

Ball mill consists of cylindrical shell rotating on a horizontal axes, mounted on a sturdy mild steel structure. Both the end plates of the ball mill are strongly designed to with stand the rotational load of the mill with grinding media and the material to be processed. Openings are provided through main hole, from where the material to be processed is loaded and discharged. The ball mill is driven by a motor coupled to the reduction gear box with chain, sprocket and belt. Satjyot ball mills are fabricated from mild steel, having SS linning, rubber lining or ceramic lining etc as required.

In a Ball mill, most of the size reduction is done by impact, as the balls drop from near the top of the shell. When the mill is rotated, the balls are picked up by the mill wall and carried nearly to the top, where they break contact with the wall and fall to the bottom, to be picked up again. Centrifugal force keeps the balls in contact with the wall and with one another during the upward movement.

While in contact with the wall, the balls do some grinding by slipping and rolling over one another, but most of the grinding occurs at the zone of impact, where the free-falling balls strike the bottom of the mill.

Note:- working capacity to be calculated at 50% of container capacity.

Satjyot manufactures heavy duty Silos for cement & RMC plants which is basically a part of cement, RMC and concrete industry. Our silo is an equipment which is used to store cement in the process of concrete mining. Our silo for cement, RMC plants is made up of best quality of mild steel. The size of our silo depends on the quantity required to mix.

For a variety of the thermodynamic processes, different type of reaction vessels are required as per the specific requirement of the process. These are constructed in mild steel, stainless steel and other alloys of Nickel, having various capacities; and with a wide variety of agitator blades to suit the customers/ process requirement. The spiral, helical pipe coils and jackets can also be provided for temperature controls as per the requirement of the process.

Our Horizontal Storage Vessels are simple vessels used in many industries for storing liquids, solutions, pharmaceutical raw materials and chemicals. They are made of stainless steel, fibre glass, titanium, galvanized steel etc. Our products are mounted on stands or saddles and have an access port either at the bottom or at the top.

Our Fabrications are applicable in different industries. They are manufactured on the basis of specific demands of our clients. We offer a wide range of fabrications, which includes

• Pressure filter
• Steam volcanizer
• Sand filter
• Pressure vessels
• Vertical Storage Tank
• Sanitary Mix Tanks
• Horizontal Storage Vessel
• Process Tank
• Heating Coils
• Vertical Vacuum vessel
• Storage Tanks Vessel
• ASME Half Pipe Jacketed
• Sanitary Mix Tank
• Stainless Steel sanitary Vessels
• Vertical Vessel
• Stainless Storage vessels
• Sanitary Mix Vessel