Solid State Relay Manufacturer,Soft Starter Manufacturer,Solid State Relay Supplier,Soft Starter Supplier,India

Satronix (India) Pvt. Ltd. is an Indian market leader in power electronics. We are manufacturing and exporting superior quality Solid State Relays (SSR) since 1985. During two decade of our existence in this business, we have transformed greatly to influence the market and represent as the best-organized company. At present we cater to more than 200 OEMs and many large corporate houses. Our products are used extensively by Indian Defense organizations and also by various multinational companies in Industrial automation.

ABOUT THE PROMOTER
Our M.D., Mr. B. S. Jadhav has worked with Tata Electric Companies as Executive Research & Development Engineer and has rich experience of 19 years prior to establishing Satronix. His expertise has helped Satronix stay in pace with the latest technology.

OUR PRODUCTS
We deal in a wide variety of Solid State Relays, Motors Soft Starter / Optimiser and Inverters that are held as benchmarks for quality

» Energy Saver
» Single Phase Capacitor Switching SSR
» 3-Phase Proportional Control SSR
» Analog / Proportional Control SSR
» Single Phase Short Circuit Protected SSR
» PCB Mounting Optically Isolated T & K Type SSR & Input / Output SSR Modules
» Analog Soft Starters

ENERGY SAVER / SOFT STARTER FOR 3 - Phase INDUCTION MOTORS ( 2 - 1000 HP MOTORS )

Microcontroller Based Power Optimizer / Soft Start- Soft stop for Three Phase Motors .

Satronix Energy saver is a field - proven thyristorised micro controller based unit. Energy saver is able to instantly detect by microprocessor control any change in load variation & automatically adjust the output voltage by matching output to load.

The losses (iron/magnetizing & copper loss) inherent in all AC induction motors are thereby considerably reduced dramatically. Thus improving the motor efficiency and reducing electricity bills. The soft start facility is incorporated in all 3 Phases of the Energy saver. It provides a gradual and controlled increase (soft start)/(decrease in case of soft stop) in the voltage applied to the motor terminals, thus eliminating the high peak current created during the starting cycle of induction Motors.

Features

Power range up to 710 kw at 440 V .
Compact and Efficient .Thyristorised microcontroller Design
Choice of startup functions; breakaway pulse, voltage ramp, voltage or current limiting
Power Optimizer
Adjustable Torque i.e Pedestal voltage
Adjustable Ramp up Start time
System Run, fault, Power, start and Optimize
Additional microcontroller Motor protection Device

Applications
Air Conditioning Systems at ( Malls, Office Complexes,.etc..), Elevators, Industrial Presses, Injection Moulding machines, Conveyors, Quarries/ Mines(Crushers) & many many more..

Click Here to Send Online Enquiry

ANALOG / PROPORTIONAL CONTROL SSR

I/P:4-20 mA Control
Load:24 - 240 VAC
48 - 480 VAC
25-110 Amps

Using SMT Technology
Direct control by integrated circuits
LED indication of loop current
Anti-parallel double SCR
Galvanic separation between control buffer and power circuits (4000 volts)
4000 Volt Insulation
Rated operational voltage : Up to 600 VAC
Rated operational current: 10, 25, 50, 75 and 90 A
Analog switching for resistive loads
Built-in power

Click Here to Send Online Enquiry

3 PHASE DIGITAL PROPORTIONAL CONTROL SSR
	I/P: 4 to 20mA(From PID) 0 to 10 VDC Load:0-100% 48-440 VAC 25-110 Amps per phase Built-in power Liner power controller for delta Connected resistive load Can be used for resistive and inductive loads Built-in power supply Phase angle control for each phase Higher ratings available on request Click Here to Send Online Enquiry

PCB MOUNTING OPTICALLY ISOLATED T & K TYPE SSR, INPUT/ OUTPUT SSR MODULES I/P: 3 to 32 VDC
DC-DC SSR: Load: 5-200 VDC/ 1A Load: 5-100 VDC/ 3A mps DC - AC SSR Load: 25 - 330 VAC / 3Amps Available with 4,8, 16 or 24 SSR Modules Different configuration of module available on the same mounting rack as per customer requirement DIN Rail Mount models are available. Click Here to Send Online Enquiry

ANALOG MOTOR SOFT STARTERS
	For single and three phase motors upto 11 KW adjusted ramp up, ramp down time & starting torque Click Here to Send Online Enquiry

CAPACITOR SWITCHING SOLID STATE RELAYS (DC-AC / AC - AC)
Available for loads from 5 - 40 KVAR

INPUT: DC / AC Control.
OUTPUT: Direct Copper Bonded Back-To- Back SCR
Opto-Isolation 4000 VAC
Overvoltage rating High PIV 1600 V peak
High I²T / A²S
Zero Voltage Turn-on
Reverse Voltage Protection For DC/AC Relay
Built in snubber
Chassis Mountable
LED Indicator showing Relay 'ON' status
Suitable for Capacitors load : Power Factor correction
High immunity - low zero cross over voltage

Click Here to Send Online Enquiry

SINGLE PHASE SHORT CIRCUITED PROTECTED SOLID STATE RELAYS DC - AC

Single Phase Short Circuit Protected SSR

Opto isolation 2500 VAC.
Gets protected against load short circuits.
Zero Voltage Turn-On.
Reverse voltage protection.
TTL Compatible (sink mode).
Output NO configuration.
Built in snubber.
Chassis Mountable.
Higher load cycle resistance.
High thermal cycling capacity.
High fusing current.
Normal/Fault Indication.
Rated operational current : 10, 16, 25 and 30 A

(J: Zero voltage turn-on; K: Random turn-on)

Click Here to Send Online Enquiry

OUR STRENGHTS

Manufacturing Set-up: We have two manufacturing units in an Electronic Zone at Bhosari MIDC Pune. Located just 100 kms from Mumbai, these units are equipped with state-of-the-art facilities for manufacturing any critical product
R&D Set-up: A team of highly experienced R&D personnel always work on product & process development. Backed by sophisticated lab, hardware & software, they make it possible to stay ahead in the competition. .
Marketing Set-up: Our sales office is located in Mumbai with sales network spreading all over India. This helps us deploy sales force to every nook and corner to generate business
Export & Import Infrastructure: Undergoing CE marking & UL approval and well equipped to export to any part of the world. FAST MOBILITY OF ORDERS and QUALITY (STRINGENT) MAINTAINED FOR LARGE ORDERS TOO.
Representing :
Soft Hard Automation Pvt. Ltd. for Microcontroller based economical Motor protection devices.

Contact Person	Mr B. S. Jadhav (Managing Director) Ms. Rupali Jadhav Menon (CEO Marketing)
Address	412, Laxmi Plaza, Laxmi Industrial Estate, Link Road Andheri (w) Mumbai - 400 053, Maharashtra (INDIA)
Phone	+(91)-(22)-26325242
Fax	+(91)-(22)-26325242
Factory Address	Unit No. 1, Electronic Sadan 1/ Unit No:12, Electronic Sadan 3, Bhosari MIDC, Pune - 411026, (INDIA)
Phone	91 (20) 7122758
Fax	(20) 7129518
E-mail	satronix@bom3.vsnl.net.in