CE" Approved modular construction float switch is one of the preferred item by our clients. The weatherproof or flameproof models has a enclosure in cast
The are used for measuring Differential level Controlling of liquids like Water, Oils, Fuels, Condensate, Alkalies, etc. in power station, Chemical petrochemical and Pharmaceutical industry. We have different type of Float chambers available with us which are used for external mounting of the switch.
Beside, this we have High temperature version and EX version available with us.

Features

• Modular construction.
• Weatherproof or Flameproof models.
• Enclosure in Cast aluminium.
• Bellows assembly for use in liquids with suspended particles.
• Available in Fixed/Adjustable operating differential.
• Side mounted version
• Various float extensions like horizontal, vertical, 'Z' type
• Different type of Float chambers for external mounting of the switch.
• High temperature version available.
• “CE” Approved version.
• EX version available

Application

• Low/High alarm interface level control.
• Differential level control.
• Controlling level of liquids like Water, Oils, Fuels, Condensate, Alkalies, etc.
• Power station Chemical petrochemical and Pharmaceutical industry.

Specifications

• Switch rating: 5A@ 230 VAC
  Resistive.
• Temperature: 0°C to 180°C
  -20°C to 300°C (Optional)
• Pressure: 30 Kg/cm²
• Density: 0.7 Kg/dm³
• Process connection: Squar Flange standard slip on flanges (Opt)
• Cable Entry : 1 no.
  ¾'' UNF (F) (Std.)
  ½'' NPT (F)
• Protection: IP65, IP67

The displacer switch available with us is Mainly used for liquids with density 0r5 to 1.2. It has Set point adjustability over entire measuring range and cable length up to 20 m. The Pressure Rating 10 Kg/cm' or 40 Kg/Cm" CMRI, CCOE approved switch for hazardous area. It is non -corrosive and is useful for temperature range from 0 to 3000C Higher Temperatuer on Request.

Features

• Top mounted
• Mainly used for liquids with density 0.5 to 1.2 gm/cc.
• Set point adjustability over entire measuring range by adjusting displacer position.
• Set point field adjustable over entire cable length up to 20 m
• Pressure Rating 10 Kg/cm² or 40 Kg/cm²
• CMRI, CCOE approved switch for hazardous area.

Application

• It is suitable for Non-corrosive duties.
• It is suitable for measuring range up to 20 mtrs.
• Useful for temperature range from 0 to 3000C
• Higher temperature on request.

Specifications

• Switch rating: 5A@230VAC Resistive
• Temperature: 0°C to 150°C
  0°C to 350°C (Optional)
• Pressure: 10/40 Kg/cm³
• Density: 0.5-1.2 Kg/dm³
• Protection: Ip67

The paddle level switch with weatherproof enclosure are manufactured using cast aluminium poiyurethane. They have a separate cable entries for supply and control. They have a seal to prevent gress of dust.. It helps in controlling the level of free flowing powders / granules / solids in the hoppers, bins and silos.

Features

• Weatherproof enclosure
• Cast aluminium polyurethane painted.
• Separate cable entries for supply and control.
• Lip seal to prevent ingress of dust particles in to main enclosure.
• Fixed/adjustable shaft extensions to suit the functional requirement.
• Optional air purging facility.
• High temperature stand off available.

Application

• It controls the level of free flowing powders/granules/solids in the hoppers, bins and silos.

Specifications

• Switch rating: 230VAC 5A (Std.)
  230VAC 10A (Optional)
• Temperature: 0°C to 100°C
  100° to 400°C (with HTSO)
• Pressure: Atmospheric
• Protection: IP-65

Vibrating Fork Level Switch 135VLC/VLR/VS

Features

• No calibration required, simplified installation and commissioning.
• No moving parts, hence no mechanical wear and tear.
• Weatherproof osure.
• Adjustable control action sensitivity.
• All wetted parts are in SS316, hence suitable for use in food industry.
• PNP/NPN Open collector output for reduced cabling.
  
• Relay output version.
  
  Application
  
• Free flowing materials stored in a vessels/hoppers.
  
• It is mainly used when there is hygienic/sanitary applications like food industry.
  
• Dairies.
  
• Soap/Healthcare plants.
  
• Cement plants Ash Handling plants.
  
• Iron & Steel plants
  
• PVC/PP plants
  
• Food grains, Foundry Coal handling plants
  
  Specifications
  
• Switch rating: 230 VAC, 5A
  
• Media Temperature: 0°C to 120°C
  
• Pressure: 10 Kg/cm² (Max.)
  
• Density: 0.05 kg/dm³ (Min.)
  
• Vibrating frequency: 85 Hz. (Approximately)
  
• Process connection: 1'' BSP/NPT/Flanged.
  
• Cable Entries: 2 x ½'' UNF. Pg11

2 x ½'' NPT (standard)

The microprocessor based compact size miniature fork is made from stainless steel 316. They are used in Food grains, coal handling plants and Sugar industry. The switch is for detection of all liquids powders / granules / solids in the tanks, hoppers, bins and silos, etc.

Features:

• Miniature Fork, compact size.
  
• Microprocessor based instrument.
  
• Very low power consumption, 15mA@24 Vdc
  
• Immune to high frequency noise
  
• Field Programmable by Magnetic Key
  
• Performance independent of material characteristics e.g. Conductivity, dielectric constant, moisture contents, etc.
  
• No moving parts
  
• All wetted parts in SS 316
  Housing weatherproof to IP65
  
• IS version available
  
• Health Check feature available
  
  Application
  
• The switch is for detection of level of All liquids powders/granules/solids in the Tanks, hoppers, bins and silos, etc.
  
• PVC/PP plants
  
• Food grains
  
• Coal handling plants
  
• Sugar industry
  
  Specifications
  
• Frequency: 2KHz. (approx.)
  
• Material size: 10mm (max.)
  
• Fork length: 80mm (Standard)
  
• Process connection: 1 ½'' BSP/NPT (M)
  2'' BSP/NPT
  
• Temperature: 0°C to 80°C
  
• Pressure: 10 Kg/cm²
  
• IS version available

Single/two point switch with adjustable lime delay has Surface/ pipe mounting. It is available with probe failure alarm. Wide range of electrodes enables the use with conducive / non- conductive liquids and free flowing powders, granules and solids.We have different probes for solids & liquids. These coat-safe probes helps to overcome effect of material build-up for use with sticky material

It is used for detecting the liquid level and FLY ASH in power plants, petrochemical plants and Chemical plants. Turbine cooling systems in Power plants.

Switch rating: 230VAC.5A, 2A VDC

Temperature:0:c to 55:C

Atmospheric: 10Kg/Cm!

Cable Entries:1/2"NPT/UNF-3nos

Process :1"B

The specially designed economical stand has a narrow 5 degree is made from PP, PVDF, PTFE, stainless steel, Plastic and Aluminum. It used for calculating any liquid & free flowing solids. It helps in easy calculations of open channel flow measurement.

Features

• Two or Four wire
• 
  Narrow Beam Angle
• Fully Temperature Compensated
  
• PP and PVDF transducers
  
• Aluminium Housing to IP 65
  
• Programmable through external removable keyblock
  No site calibration required
  
• 4 Wire version with 1 C/O Relay
  
  Application
  
• For liquids
  
• Volume can be displayed
  
• May be used for open channel flow measurement
  
• Temperature Indication
  
  SpecificationsL
  
• Measuring Range: 2 Wire: 4m/6m/8m/10m
  4 Wire: 15m
  
• Supply Voltage: 2 Wire: 14 to 30 VDC
  4 Wire: 20 to 30 VDC or
  230/110 VAC
  
• Accuracy: 2 wire: 0.2% of measuring range
  4 wire: 0.25% of measuring range
  
• Temperature: 10 to 60°C
  
• Pressure: Atmospheric
  
• Cable Entries: 2 Wire: 1 x Pg11
  4 Wire: 3 x Pg11
  
• Output: 2 Wire: 4-20 mA
  4 Wire: 4-20 mA, Relay Contact

Level Measurement instrument manufactured by us is used for Petroleum storage tanks in Refineries, Marketing Terminal / Oil storage. The various accessories for Solutions for Level clear liquids in large bulk storage tanks are Cone Roof, Floating Roof, Underground.

Features:

• Wetted parts available in SS304/SS316.
  
• Suitable for installation on “Tank in service”.
  
• Large numerals visible from a distance.
  
• Simple installation and commissioning
  
• Liquid seal for trap vapour for highly evaporating material
  
• Indicator rolls on gauge board with the help of nylon rollers.
  
• Supplied with all installation accessories
  
• Floats of various materials & sizes are available to suit specific requirements.
  
  Application
  
• Top mounted version designed specifically for sump application is available.
  
• Number of configurations to suit various tanks underground and above ground, cone roof, floating roof, horizontal cylindrical, reservoir, sump etc.
  
  Specifications
  
• Float diameter: 300/400
  
• Process connections: 1½'' threaded/flanged
  
• Tank height: Suitable for 2 to 20 mtr.

Capacitance 104 HIT available with us are required except Zero and Span setting. All accessories for fitment are supplied. All entries are protected through password in EEPROM. Alarms on loss of head has a optional indicator. 3 IS Version available Differential level Head for water in fi beds for water treatment plants.
Features

• Low cost solution.
  
• 4-20 mA-Two wire transmitter
  
• Weatherproof cast aluminium enclosure
  
• No calibration at site required except zero and span setting.
  
• All accessories for fitment are supplied.
  
• All entries are protected through password in EEPROM.
  
• Alarms on loss of head using optional indicator.
  
• IS Version available.
  
  Application
  
• Differential level measurement (Loss of Head for water in filter beds for water treatment plants.
  
  Specifications
  
• Accuracy: ±2% of Electrode Length
  
• Display type: 6 digit LCD display.
  
• Temperature: 60°C (Max.)
  
• Pressure: Atmospheric
  
• Cable Entries: ½'' NPT or ¾'' UNF (F)

The capacitance 104 fit has easy calibration and higher accuracy of flow with multipoint calibration. All entries are protected through password EEPROM. The self diagnostic
effluent treatment plants, water treatment plants and other similar applications.
Features

• 
  Low cost solution.
  
• Easy calibration.
  
• Higher accuracy of flow with multipoint
  
• All entries are protected through password in EEPROM.
  
• Self diagnostic function i.e. error message on display.
  
• IS version available.
  
  Application
  
• Measurement of flow rate in the inlet/outlet of filter house/beds, effluent treatment plants, water treatment plants and other similar applications.
  
  Specifications
  
• Accuracy: ±2% of probe length
  
• Display: 6 digit LCD display
  
• Temperature: 0 to 60° (Max.)
  
• Pressure: Atmospheric
  
• Cable entries: ¾'' UNF (F)

We have Wide range of various duties capacitance and capacitance meter. It has a programming and calibration in sealed condition of unit which helps in higher accuracy for multipoint calibration. This calibration is possible Up to 10 point. WE have different versions available with us : remote, integral, conductive and Non-conductive liquids. IS versions are available for Power plants Refinery, Petrochemical plants Chemical plants, systems in power plants, Raw /Pre Water plants Sewage tn plants.

Features:

• Two wire transmitter.
  
• Level to volume conversion with strap.
  
• Wide range of electrodes to suit various duties.
  
• Programming and calibration in sealed condition of unit.
  
• Higher accuracy for multipoint calibration.
  
• Up to 10 point calibration is possible.
  
• Remote as well as integral versions are available.
  
• Two version for conductive and Non-conductive liquids.
  
• IS version available
  
  Application
  
• Power plants
  
• Refinery
  
• Petrochemical plants
  
• Chemical plants
  
• Turbine cooling systems in power plants
  
• Raw/Pre water treatment plants
  
• Effluent treatment plants
  
• Sewage treatment plants
  
  Specifications
  
• Temperatures: 0°C to 55°C
  
• Humidity: 0.95% max.
  
• Display: 6 digit LCD display.
  
• Protection: IP-65
  
• Accuracy: ± 2% of FSD

These switch manufactures by us are used in Blending plants, Retail Outlet / LPG Storage / Bottling plants, Auto LPG Dispensing stations, Fuel Oil storage tanks in power plants. They are known for high reliability and extended life.
Features

• Uses simple switched resistance array.
• Local display of level, temperature, volume
  
• 4-20 mA output for remote indication
  
• Suitable for small capacity LPG vessels.
  
• High reliability and extended life.
  
• No maintenance.
  
• CMRS & CCE certified.
  
• BIS licensed.
  
• Optional Hart equivalent output
  
  Application
  
• Accurate volume indicator.
  
• Suitable for pressurized application – LPG.
  
• Blending plants
  
• Retail outlet/forecourt
  
• LPG storage/bottling plants
  
• Auto LPG dispensing stations
  
• Fuel oil storage tanks in power plants
  
  Specifications
  
• Indication: 0-3000 mm Level,
  0-9999 L/KL volume
  
• Enclosure: Cast aluminium, Weatherproof IP-65
  
• Display: 6 Digit LCD, 12mm high.
  
• Pressure: 16 Kg/cm²