Possessing sound relation with quality oriented manufacturers, we offer highly efficient egg laying concrete block making machines. Fixed on wheels, the hydraulic concrete block making machine can be easily moved while in operation. The machine lay blocks on a concrete floor and move to the next position and thus eliminates the requirement for wood or steel pallets. The mould and ram are moved by hydraulic cylinders, creating a much stronger block. The process requires comparatively less consumption of cement.

By affixing the desired mould, any type of blocks can be produced with consistent quality. With the help of machine, several standard moulds can be made readily available as per the client specifications. This concrete block making machines apply pressure of 2000 PSI and can be used in producing solid blocks, hollow block, bricks galore and interlocking pavers.

Production per stroke:

• 400 X 200 X 200 MM 2 per cycle
  
• 400 X 200 X 150 MM 3 per cycle
  
• 400 X 200 X 100 MM 4 per cycle
  

Cited below are some of the technical specifications of the machine:

• Power Required: 3.5 HP / SINGLE (or) 3PHASE.
  
• No. of operations : 50 - 60 PER HOUR
  
• Vibrator Motor : 1HP, 440V, 3PH
  
• Hydraulic Pump Motor : 2HP, 440V, 3PH
  
• Travel Motor : 0.5HP, 440V, 3PH
  
• Machine Weight : 750 KG (APPROX.)
  
• Cubic space occupied by the machine: 1700 x 900 x 1700 MM

Cement block machine is a pneumatic stationary machine used to produce about 7,500 four inch blocks per day. The machine can be equipped with an automatic elevator to load mix into hopper. To maintain a constant flow of blocks, it requires a concrete mixer with a capacity of at least 300 liters.

Production ranges of Cement block machine include following:

• 5-10 x 20 x 40mm (4") blocks per cycle or about 7,500/day
  
• 3-15 x 20 x 40mm (6") blocks per cycle or about 4,500/day
  
• 2-20 x 20 x 40mm (8") blocks per cycle or about 3,000/day

The hydraulic operated concrete block making machine is egg laying type machine on wheels. These hydraulic concrete block making machine works by laying blocks on a concrete floor and then moving to the next position. The process helps in eliminating the need for wood or steel pallets. Hydraulic cylinders move the mould & ram and create a much stronger block. It helps the block maker to use comparatively less cement in making the blocks.

With the help of machine, several standard moulds are readily available. Hence, any type of blocks with consistent quality can be developed by affixing the desired mould. Highly efficient hydraulic operated concrete block making machine assists in producing custom moulds. Applying pressure of 2000 PSI, this machine can be used to produce hollow block, solid blocks, bricks galore and interlocking pavers.

Various salient specifications of the hydraulic operated concrete block making machine comprises of following:

• No. of operations: 50 - 60 PER HOUR
  
• Vibrator Motor: 2HP, 440V, 3PH
  
• Hydraulic Pump Motor: 5HP, 440V, 3PH
  
• Travel Motor: 0.5HP, 440V, 3PH
  
• Machine Weight: 1500KG (APPROX.)
  
• Cubic space occupied by the machine: 1100 x 1475 x 1750 MM
  

Production per stroke of the machine:

• 400 X 200 X 200 MM 5 per cycle
  
• 400 X 200 X 150 MM 6 per cycle
  
• 400 X 200 X 100 MM 10 per cycle
  
• Pavers upto 16 per cycle

We offer export quality hydraulic egg laying concrete block machine which are sourced from established and reputed manufacturers around the world. The machine is based on wheels ensuring fast and efficient work. The machine after lying blocks on a concrete floor moves to the next position. This process eliminates the need for wood or steel pallets.

The mould and ram moved by hydraulic cylinders creates a much stronger block. With this, the block maker can use less cement in the block manufacturing process.
Several standard moulds as well as custom moulds are readily available. By affixing the desired mould, any type of blocks can be produced with consistent quality. This machine can apply pressure of 2000 PSI & can be used in producing hollow block, solid blocks, bricks galore and interlocking pavers.

The range is available in the market with cited below technical specifications:

• No. of operations: 50 - 60 per hour
  
• Vibrator motor: 1.5HP, 440V, 3PH
  
• Hydraulic pump motors: 3HP, 440V, 3PH
  
• Travel motor: 0.5HP, 440V, 3PH
  
• Machine weight: 1200KG (approx.)
  
• Cubic space occupied by the machine: 2000 x 1500 x 2000 MM
  

Production per stroke of Hydraulic Egg Laying Concrete Block Machine:

• 400 X 200 X 200 MM 4 per cycle
  
• 400 X 200 X 150 MM 5 per cycle
  
• 400 X 200 X 100 MM 8 per cycle
  
• Pavers upto 16 per cycle

Manual movable concrete block making machine is an inexpensive manual block laying machine. It is a perfect machine for a startup, small scale block maker who needs more production as well as better quality blocks. After laying blocks on a concrete floor, the machine is moved to the next laying. This process eliminates the need for pallets for block handlers, who usually remove the green blocks and pallet from the machine prior additional blocks can be made.

The machine is suitable to be fitted with any type of ram and mould. Moulds can be also customized as per client specifications. This machine can be fitted with either a 4.4 HP Diesel motor or a 1.5 HP., 2800 RPM electric motor with clutch and throttle controls for the vibrator.

Production ranges per stroke offered with the machine are as follows:

• 400 X 200 X 200 MM (8") 2 per stroke
  
• 400 X 200 X 150 MM (6") 3 per stroke
  
• 400 X 200 X 100 MM (4") 4 per stroke
  

Mentioned below are certain features of the manual movable concrete block making machine:

• No. of operations: 50 - 55 per hour
  
• Power vibrator: 1.5HP, (1PH, 3PH)
  
• Vibrations: 6000Hz constant
  
• Amplitude: adjustable
  
• Moulding area: 430 x 600MM
  
• Machine weight: 700KG (approx.)
  
• Dimensions: 1000 x 1250 x 1500mm

With wide network, we source precision engineered and highly effective manual block making machine from reputed manufacturers with electric vibrator. There is a feed box fitted in the machine, which is specifically designed impeller. It reduces feeding time and makes it possible for distributing mortar more smoothly and thoroughly. A specially designed height/density control bar is outfitted with the machine to regulate vibration and compression time. It also controls the height and density of the block.

The hydraulic pumping system for loading & unloading is driven more gently and guards against cracking. The outside of the loader and unloader towers is mounted with the indexing trees to make them easy to get to for daily lubrication and for manual indexing, if necessary.

Keeping in mind the client specific needs, the auto cuber is designed and built by the manufacturers. It is modularly constructed with several possible in-feed configurations. Computerized control for fully automatic operation makes it easy for trouble-checking.

Tabulated below are the technical specifications of the manual block making machine from reputed manufacturers with electric vibrator:

Spec		PROCON-3000
Steel pallet	Exportation	500 x 460 x 6 mm
	Domestic	500 x 430 x 6 mm
Production height	Exportation	60-250 mm
	Domestic	200, 60-200 mm
Cycles per minute		5
		1cycle	1hour
190 x 90 x 57 mm Brick		32	9,600
100 x 190 x 390 mm Block		4	1,200
150 x 190 x 390 mm Block		3	900
190 x 190 x 390 mm Block		2	600

We supply stationary hydraulic operated concrete block making machine which is efficient in making blocks with sharp edge. Available in moderate cost, the range SBEZ 12 (transfer type) offers with maximum working space. The greatest exchanging of accessories can be used in the extension of middle level machine Procon 2000. The SBEZ 12 is confirmed as a superior machine by research and efforts of the manufacturing and engineering team.

Model			PS-12
Total Power Consumption (kw)			8.85
Pallet Size	Steel		4mm x 450mm x 230mm
	Wood		20mm x 450mm x 230mm
Max Daily Capacity(Q'ty/10Hr)	Brick		43,200
	Block	4"	7,200
		5"	3.600
		6"	3,600
		8"	3,600
Cycle/Min			5~6

We offer wide array of hydraulic operated mosaic and paving block making machine which is catered to meet the requirements of construction industry. The range is accredited for simple operation, long service life, dimensional accuracy and low maintenance. The machine is available in the market with following features:

• Per stroke: 1 no.
  
• Hydraulic pump motor: 3HP, 3PH
  
• Production Capacity: 40 - 50 strokes
  
• Machine Weight: 1000KG (approx.)

We have emerged as one of the trustworthy distributors of quality sieving machine with vibration feature. The range is sourced from reliable and reputed manufacturers, is highly efficient and available to our buyers with minimum financial investment. The machine efficiently sieves all sized sands, red soil. Power required by this sieving machine with vibration is 1HP.

We offer steel frame and simply constructed paver block machines in compliance with industry standard. Hence, the range is widely appreciated and accepted by clients belonging to construction industry. The machine is fitted with material feeding box filler of hopper used for feeding materials into the mould which is wholly operated by hydraulic system. The height of the box feeder can be adjusted as per the mould being used. There is a cleaner brush in the box filler to clean the upper section of the mould. The volume of box filler is designed according to maximum capacity of production area to utilize enough raw materials supplied for the molding.

Vibration	Our range of multi block machine is specially designed using vibration system which includes starting vibration and main vibration. Model SBS-305 is efficient in providing block with middle cruising pressure.
Mold	The mould consists of box and temper head where special raw material with high exhausted property is used to make it last longer. Two rails on the box function as guiding rail for box filler.
Hydraulic Instrument	There is a pumping system fixed on a special box separated from machine construction.
Electronic Controlling	Semi automatic operational system with knob is used to place the electronic controlling system on a special unit (panel) so that it can be operated easily.

 
Specification of the machine comprises of:

• Production Area: 490 x 650 mm
  
• Pallet size: 750 x 600 mm
  
• Max. Prod. Height: 200 mm
  
• Min. Prod. Height: 60 mm
  
• Pallet hopper: up to 20 pallet
  
• Electro Motor up vibrator: 2.0 HP
  
• Down Vibrator: 2 x 7.5 HP
  
• Bucket Vibrator: 1.0 HP
  
• Hydraulics Oil Pump: 4.0 HP
  
• Concrete Mixer: 10 HP
  
• Conveyor: 2.0 HP
  
• Average Cap: 700 Cycles / 8 hours

Precision engineered concrete mixer machine offered by us is sourced from well established manufacturers who have manufacturing experience of 30 years. The machine is run by electric motor/diesel engine 6HP. Concrete mixer machine with capacity 10/7 CFT can be operated with 5HP motor.

Our range earth rammer is specially for paving block laying and industrial concrete flooring. Precision engineered machine is furnished with component vibratory plate compactor. The compactor acts as a mini road roller, suitable for compaction of industrial concrete flooring, sub-base road beds and pavement block lying.

Technical specification of earth rammer include following:

• Power: 4.4HP diesel engine or 1.5HP, 3PH motor
  
• Plate size: 500 x 600 x 16MM