Shivsu Canadian Crystalline Waters India Private Limited

Stainless steel sanitary high accuracy filling valve are used to achieve even filling in all mineral water bottles. Specially designed high pressure and low pressure filling cycle is provided with PLC control.Automatic

Angular Counter conveyer ensure proper stamping of the cap on to the Bottle Neck. The caps are fed to the bottleneck by bottle sorter and efficient chute system.

shivsu canadian clear has a state of art micron filter element, wound, pleated, nominal and absolute, filter cartridges available in ranges from 20 micron up to 0. 1 micron.

Built in clean room features with HEPA sub micron filter can be provided on request.

our commercial silver stream systems are designed for brackish water applications where high output is required, such as water bottling plants domestic, industrial use, real estate developments etc. , these units include state of the art reverse osmosis technology, that allows fully automatic operation.

compact linear bottling machine for carbonated and non-carbonated
mineral water and liquids.

stainless steel descending filling head are provided to ensure highest sanitary filling without air bobble formation and water spillage.

fully automatic bottle loading system to load water bottles from in feed conveyor to bottle holder. Advanced robot pneumatic system combined with optical sensor makes the loading process reliable and efficient.

Shivsu Canadian Clear has designed and developed multi dimensional, multi port valve of thermo sitting plastics as well as advance plastic to satisfy all the water treatment requirements for Sand, carbon, softener, DM plants etc. Sizes : Valves are available for operation from 1000 to 10,000 Liters per hour.

ozone treatment of process & waste water :

ozone is the most powerful commercial oxidant in the world. It has been used primarily as a disinfectant for drinking water since the early 1900's. It is also useful for waste water disinfection and malodorous off-gases from waste water treatment plants because ozone must be generated on site for immediate use. This is best done through a ozone generator.
ozonators, ozone generator, ozone, waste water treatment
the advantage of ozonators for commercially treating waste water is that it destroys bacteria, inhibits algae growth and reduces scaling in problematic areas. It has a faster reaction rate than chemicals and only oxidation not chlorination takes place. Ozonators provide rapid and efficient oxidation of many industrial contaminants. It is very effective for oxidizing iron and manganese, removing phenols, organic waste constituents and heavy metal contaminants. An additional advantage is that water treated with ozone does not contain any chlorinated compounds that require further treatment prior to disposal.

Eight vertically, horizontally and angularity adjustable double lamps can be turned to allow a more uniform heating of any type of preforms before blowing. Preheating is achieved by recalculating hot air exhausted by lamps and the system automatically adjusts to changes in the ambient temperature.

An oven with ten lamps (optional) permits the heating of thicker preforms.

Shivsu Canadian Clear has a state of art Anion, Canyon and Softener resins of high quality to cater to the various needs of the water treatment equipments for softening, demineralizing and mixed-bed.

shivsu canadian clear has a state of art cross - link polymide composite reverse osmosis membrane element manufactured specially by us. We have extensive experience accumulated over the years and wide range of reliable technology. Shivsu canadian clear reverse osmosis membrane meets the diverse needs of the water treatment and wastewater treatment industry. Shivsu canadian clear is one of the largest suppliers of reverse osmosis membrane all over the world. Sizes : membranes are available in all international standard sizes namely 2 ½ " x 40", 4" x 40" and 8" x 40" available for tap water, brackish water and sea water.

shivsu microtek bottling systems pvt. Ltd. , is one of the members of the shivsu group of companies. Shivsu incorporated the state of art technology in design engineering of the systems being manufactured. Cc 1000 fully automatic bottling machine specially designed by shivsu canadian clear microtek bottling systems pvt. Ltd . , for mineral water / carbonated beverages. The entire process has provisions in the machine for rinsing, filling, capping and sealing automatically. The entire process is fully mechanical with variable speed drive and gravity / counter pressure filling system. The total system is manufactured under technology transfer and technical collaboration from us microcon inc. California u. S. A. The whole equipment is sleek and is capable of bottling various sizes of bottles ranging from 500 ml to 2 litres. The mineral water bottles are fed in to the rotary rinser, filler, capper by means of an input feed conveyor. A star wheel then transfers the bottle to the neck holding robot of the rinsing station.

specially designed nylo-brussel scrubber are provided in combination with angular sprays to wash the outer surface of the bottle. The scrubber is so designed even to clean the external neck area.

standard device :

double - cylinder balance injection system
multi-prage pressure & speed injection
back-pressure adjustment device
decompression
high speed clamping
low pressure mold protection
multiple hydraulic ejector knock-out
lubrication system
hydraulic pressure full proportional control
all computer control system
moulding data memory system

PET is certainly the ideal material. But to retain that title, it also needs the full benefits of bi-axial orientation. Bi-axial orientation requires two-stage production : the preform is first produced and then, within a precise temperature range, it is simultaneously stretched both axially, (thanks to stretching rods), and radially by blowing. It is this process which gives the container its strength.

These two phases can be carried out on one double acting machine (one stage) or separately on two different machines (two stages).

shivsu canadian clear manufactures state of art nylon n11 tubing to match the shivsu canadian clear fittings. Sizes : tubing's come in various sizes and can work up to pressure of 400 to 500 psi.

All Teflon/FEP Part Mean Absolutely No Contamination. Recent studies have proven that stainless steel can leach oxides into ultra pure water. Shivsu Canadian Clear eliminate oxides and other contaminants in ultra pure water by using only Teflon and FEP as parts which contact water. Many years of field experience have shown Teflon and FEP, both fluorocarbon materials, to be the most reliable, inert and tough man-made materials. The excellent UV Sterilizers transmission characteristics of Teflon contain a higher UV field which results in a better kill of microorganisms.

Filter water wash • Detergent hot water wash
• Hot water • Ozonised water

Stage of washing is available from 3 to 11 depending upon customers requirements. Wash water recycle tank as well as 5/5 dust bin are provided in the washing segment.

Specially designed Nozzles with angular 0° to 15° ensure efficient internal wash of the bottles.

Unsafe water can cause internal and external problems. Diseases like typhoid, Dysentery, Jaundice and cholera can play havoc with ones system. Other physical damages may include loss of hair, skin discolouration and roughness.

shivsu canadian clear makes state of art ro high pressure housing of pu cpvc, advance composite frp and stainless steel. All housing are tested by our strict quality control procedure checks to maintain international standards. Size : housing are available in all international standard sizes and are available for 400 psi – 1200 psi operating pressure.

baby safe
ideal for pregnant women
ideally suited for aged people
recommended for sports and fitness
diuretic (detoxifies the kidneys)
nutritive (rapid fluid replenishment)
good for ophthalmology (skin and facial care)
an excellent hair care product
(indicated for growth and maintenance of hair. Provides shine)
essential for pharmaceutical industry
apt for the food industry
good for dental hygiene
(brushing of teeth with ro water keeps you and your gums healthy and you can also avoid water borne diseases which can be acquired during brushing gargling).

The PET bottle is a great success in many countries. And no wonder producted by the biaxially oriented blow moulding process, PET or Polyethylene Terephthalate – bottles combine outstanding performances and aesthetic qualities. They give you the super crystal clarity needed to show any product to advantage. They have excellent carbonation retention properties and a good barrier to oxygen. Extremely resistant to breakage, light to handle and transport, and safe to health and environment.

The control cabinet is equipped with a programmable microprocessor with Error Status Indicator. Setting and adjusting of the controls can be performed manually. For special climates the cabinet can be air- conditioned.

The pneumatic, hydraulic and electrical equipments, as well as the cooling system, are easily accessible. Minimum replacement time is required when one type of bottle mould is changed for another one. No special tools are needed.

The control cabinet equipped with a programmable microprocessor with Error Status indicator. Setting and adjusting of the controls can be performed manually. For special climates the cabinet can be air conditioned.

these systems are designed for any application that requires high output reverse osmosis equipment. We can also customize these units as per the feed water parameters, whether it be bore well or brackish water.

our silver stream plants are equipped with large commercial type sediment filter to remove suspended solids down to 5 micron in size. Other standard components include centrifugal high pressure pumps. Tfc membranes, full instrumentation, high pressure regulation valve, analogue water quality meter, and built in membrane cleaning and preservation system.

all of the components are of the highest quality, and arranged on a single compact frame, for maximum utilization of space. The silver stream equipments can be custom designed to work with feed water that contains up to 12,000 parts per million of total dissolved solids.

State of Art Water Conditioning Equipment for process industry :

Shivsu Canadian Clear is specialized in mineral water projects and the equipments are tailor made. In addition to the above Shivsu Canadian Clear product range meet the industries expanding requirement for treated water of varying purity level for a wide range of applications. Shivsu Canadian Clear Water treatment systems are available from standard package type to custom built installations high purity water.
Water Treatment Systems, Reverse Osmosis Systems, Mineral Water Projects
PRESSURE SAND FILTERS :
Shivsu Canadian Clear silver stream filters provide crystal clear water of turbidity level of less than 2 to 3 mg/liter on Silica scale. Horizontal and vertical filters are available in a complete range and sizes up to 3600mm dial Normal filtering medium employed is clean, sieved and grade quartz and fine sand. For application like iron removal, chlorine reduction special type filter edie are available.

The PET bottle is a great success in many countries. And no wonder, producted by the biaxially oriented blow moulding process, PET or Polyethylene Terephtalate – bottles combine outstanding performance and aesthetic qualities. These give you the superb crystal clarity needed to show any product to advantage. They have excellent carbonation retention properties and good barrier to oxygen. Extremely resistant to breakage, light to handle and transport, and safe to health and environment.

With Shivsu Canadian Clear system flexibility:

To the advantage of PET itself, the extraordinary characteristics of the SSB 10 to SSB60 are added: simplicity, compactness, reliability and flexibility.

Quickly installed, the machine is ready for producing bottles of various shapes and contents as the changes of the moulds are rapid. Renowned for these advantages, it is the small “two step” machine which is the most sold in the world and gives satisfaction to hundreds of producers for very different applications: mineral water, carbonated drinks, edible oil, detergents…

Shivsu Canadian Clear have been serving the process industry in India for the last decade. The products include patented inline Conical Filters, Cartridge filter elements in various material of construction and in different Micron ratings to cover filter elements up to 01micron for micro for air. Besides ILCF Filters and Cartridge filter elements we are also reputed to be a reliable supplier of quality filter housings which are manufactured to meet quality norms laid down by organizations like Lloyd, Bureau Verities, Davy Power gas, etc.
Reverse Osmosis Systems, Micron Filters
The range of filter housings offered by us includes Standard Filter Housings in SS 316, Poly Carbonate and PP as well as custom designed housings to cater to the specific requirement of the customers. Standard housings are offered in SS304, SS316 and MS (either in Epoxy painted or PP/rubber lined). In order to meet specification of Pharma industry and to meet latest GMP requirement all our housings meant for Sanitary, applications are provided with mirror finish on both, sides and are also electro polished to 240 grit finish wherever such a finish.

shivsu canadian clear manufactures advance composite frp vessel in its state of art factory to cater to the needs of vessels for sand, carbon and softener and dm plants. Sizes : vessel are available from 6"x36" to 48"x72".

Shivsu Canadian Clear makes Electronic pump which is a positive displacement diaphragm type actuated by a solenoid and a solid state pulsar ; safety and reliability unavailable in pumps of this size and type until now. Both stroke length and stroke frequency can be adjusted for 100:1 output range. The pump is also capable of responding to external switch closure or remote signals. Sizes : It takes up to 20 Litres per hour.

Shivsu Canadian Clear has unique high pressure fitting of various sizes and shapes to meet the entire RO production connecting requirement. These fittings are compatible to all International Standard RO Housing and capable to withstand pressure up to 300 to 400 psi.

Features :

Pumping of clear Non - Laden Liquids
Supply - Over Pressure
Industrial Water Treatment (De-mineralization, Filtration ).

Silver stream range of softeners are from standard packaged-type skid-counted and large custom built installation units are available manually controlled or semi or fully automatic. Silver stream, Shivsu Canadian Clear softeners are suitable for treating water for low and medium pressure boilers as well as for process use. The units are perfectly engineered to ensure trouble free and long lasting service with minimum operating and maintenance costs.

The custom designed de-gassers for removal of carbon-di-oxide from action treated water and deserters for removal of all dissolved gases at the final stage of boiler feed treatment. Silver stream Shivsu Canadian Clear range covers all normal capacity.

The system range from two bed demineralizer to mixed bed polishers capable of producing treated water of purity required for any specific application. Water conductivity is less than 0.1 micro siemen can be achieved. Shivsu Canadian Clear silver stream comprises wide range of demineralizers ranging from packaged type units to large custom built installations. Manual, semi automatic plants are available. The units are supplied with chemical handing, resin regeneration system comprising rubber lined steel. Vessels and tanks and also rubber lined steel piping with cast iron rubber lined diaphragm valves which ensure failsafe operation.

Shivsu Canadian Clear has revolutionized the Pet Industry by producing a high production Rotary Pet Stretch Blow Molding Machine capable of producing 1000 -1200 Pet Bottles Per Hour as well as 2000 - 2200 Bottles Per Hour. This unique Rotary design is one of its kind and involves four Robo-arms which carry the preforms to the Blowing Station and brings out the blown bottles. Then the blown Pet bottles are ejected automatically. The machine is 80% Automatic and produces large quantities of bottles with great simplicity. The total system is controlled by a State of Art PLC with Digital Display. The PLC is user friendly and gives error status.

The PET bottle is a great success in many countries. And no wonder, producted by the biaxially oriented blow molding process, PET or Polyethylene Terephthalate - bottles combine outstanding performances and aesthetic qualities. They give you the superb crystal clarity needed to show any product to advantage. They have excellent carbonation retention properties and a good barrier to oxygen. Extremely resistant to breakage, light to handle and transport, and safe to health and environment.

Shivsu Canadian Clear silver stream filters provide crystal clear water of turbidity level of less than 2 to 3 mg/liter on Silica scale. Horizontal and vertical filters are available in a complete range and sizes up to 3600mm dial Normal filtering medium employed is clean, sieved and grade quartz and fine sand. For application like iron removal, chlorine reduction special type filter edie are available.

A wide range of chemical dozing equipment is specially designed by Shivsu Canadian Clear for specific water quality requirements. For mineral water industry special TSS and Absorption Filters designed to meet the specific water quality level.