Our compression Testing Machine 1000KN has a massive capacity of 100 Tons. These are being manufactured strictly as per the industrial standards. Designed for testing of Cement and Concrete Moulds of Various sizes, these can also be used for testing bricks with the help of its adjustable hand wheel.

The salient features are as follow:

• Economy Channel Model
• Hand Operated fitted with 15 cm dia load gauge
• Can test Cement, Concrete Moulds of following sizes
  • 15cm x 15cm x cubes
  • 10cm x 10cm x cubes
  • 7.06 cm x 7.06 cm cubes
  • 15cm x 30cm cylindrical mould

Our compression Testing Machine provides simple economic & reliable means to test concrete cube for its compressive strength. Its simple design makes it user friendly for construction and operation. These machines are suitable for operation on 440V, 3-phase, AC supply

The salient features are as follow:

• Capacity of 200 tons
• Electrically cum Manually Operated fitted with three load gauge, i.e, 0-500 KN x 2 KN/ Division, 0-1000 KN x 5 KN/ Division, 0-2000 KN x 10 KN/ Division.

We have designed our Core Cutting Machine specifically to take out core sample from Asphalt, concrete & reinforced structure. Fitted with Air - Cooled Grieves Engine, the capacity of the machine is 100mm dia x 200mm depth.

We supply our machines with water tank for cooling to the drilling bit.These machines are portable & have towing arrangement with pneumatic wheels for easy movement.

Moreover, these machines are supplied with one Diamond Core Bit 100mm dia & one Core Barrel 200 mm long.
 

We offer our clients with Marshall Stability machines at highly competitive prices. These are being manufactured as per industrial standards keeping in mind the client’s requirements. Use of cutting edge technology has ensured their high quality standards.

The salient features are as follow:

• Marshall Load Frame 50 KN capacity Electrically operated, with platen rate travel 50.8 mm/min, safety cut out switch is provided with the machine. Suitable for operation on 220 V single phases
• Compaction Pedestal
• Compaction Mould with collar & base plate
• Compaction Hammer 4.5kg and 457mm fall
• Breaking Head Assembly, chrome plated
• Load Transfer Bar
• Specimen Extractor (100mm dia Platen)
• Dial gauge 0.01mm x 25mm travel
• Proving Ring 25KN/30KN capacity (Optional) With calibration certificate in teak Wooden carrying case

We offer our clients with precision engineered laboratory cbr test apparatus at highly competitive prices. These are manufactured as per the industrial standards keeping in mind the client’s requirements.

The salient features of these are mentioned below:

• 50 KN (5000 kgf) Capacity with Strain Rate of 1.25 mm per minute
• Load Frame, Electricity cum Manually Operated 220 V, Single Phase AC Supply.
• CBR Mould with collar & base plate.
• Penetration Piston, 50 mm dia with bracket
• Perforated Brass Swell Plate with stem & locknut
• Displacer Block 148 mm dia with T-Handle
• Annular & Slotted Metal Weight 2.5 kg
• Aluminium Tripod Stand
• Rammer 50 mm internal dia 2.6 kg & 4.89 kg
• Proving Ring 10 kn capacity with Calibration Certificate in teak wooden carrying case
• Dial Gauge 0.01 mm x 25 mm travel

Mounted on a frame, the Mixer consists of a steel vessel of 55/ 110 litres capacity. These moulds are provided with two large wheels for carting away. Provided with ½ HP motor, suitable for Operation on 220V, Single Phase, 50Hz, AC Supply.

The salient features are as follow:

• The vessel is rotated at 20-22 RPM with the help of a motor and a reduction gearbox
• The vessel can be titled to any angle by a hand wheel and counter weight facilitating mixing and discharge
• Blades are provided inside the vessel to mix the material thoroughly
• The large hand wheel facilitates manual rotation of the drum during power failure The drum, hand wheel, and motor, etc, are mounted on a steel frame

Our aggregate impact testers are extensively used for determining the aggregate impact value. Our instruments comprises of a circular base with two vertical guides.

Their hammer of weight 13.75 ±0.25 kg is raised to fall freely down the vertical guides and the height of fall is adjusted through 380 ± 5mm.

Our speedy moisture meter are used for determining percentage moisture content on the wet weight basis up to 25% which is equal to 33.3% moisture content on the dry weight basis. Same as above but 0-50% moisture meter also available. These are completely polished in wood and carry case with handle.

It comprises of the following components:

• Pressure vessel with clamp for sealing cap
• Rubber sealing gasket
• Pressure gauge calibration in percentage moisture content 0-25% on the wet weight basis (6 gm) counter poised balance for weighing samples
• Scoop for measuring reagent carbide
• Bottle of reagent carbide
• Cleaning brush

Our precision engineered cube moulds are available in various sizes. Made as per the Indian and British standards, these cube moulds are offered complete with base plate. We have machined the faces flat to ± 0.02 mm accuracy and are finished to within 0.02mm for the metric size cube moulds. Whereas, for the inch size cube moulds, the faces are machined flat to ± 0.01 inches and finished to within 0.01mm.

The sizes in which they are available are as follow:

• 5x5x5 cm
• 10x10x10 cm
• 15x15x15 cm
• 20x20x20 cm
• 30x30x30 cm

These are electrically operated for the determination of Bitumen percentage in bituminous mixtures. It consists of removable precision machined aluminium fetor bowl mounted on a vertical shaft.

These are ideally suitable for operation on 220V, 1Ph, 50Hz AC Supply. Moreover, the extractor is supplied complete with pack of filter paper.
 

Our hot air ovens are re manufactured of aluminum, stainless steel and mild steel. These are ideal for day to day heating and drying applications performed in various laboratories.

These are being supplied to our clients after testing them on various parameters.

We have designed the auto Level to successfully meet the requirements of Civil Engineer. These are being manufactured as per various industrial standards to ensure their high quality standards.

The salient features are as follow:

• Surveyor and Mining Engineer for high grade instruments giving a maximum portability
• Magnification - 22x
• Standard Deviation for 1 Km
• Double Run Leveling - 2 mm
• Supplied with Aluminium Telescopic Tripod Stand