We are one of the leading manufacturers and exporters of highly efficient atomic absorption spectrophotometer. These are offered to our clients with customized solution as per their technical specification. Modes of operations of the instrument include absorbance, concentration, standard addition & emission. The range is stringently checked by our quality team prior to its dispatch at client end.
Features of atomic absorption spectrophotometer include:

• Microprocessor based, user friendly, menu driven, with printer interface
• Optional PC Compatibility with RS 232C Interface and MS Windows® based Software for data acquisition, processing, storage, retrieval & interpretation of data
• Continuous source background correction
• Quick change and easy alignment of hollow cathode lamps with standby warm-up facility
• Precise vertical, lateral and rotational alignment of Titanium Burner
• Optimal parameters storable in built-in memory
• Self diagnostic

Specifications:

Spectral
Range	190 to 900 nm
Accuracy	± 0.5 nm
Bandwidth	0.15 to 3.0 nm variable in steps of 0.15 nm
Photometric
Range	0 to 2 Abs
Accuracy	± 0.01 Abs at 1 Abs
Integration Time	0.04 to 99 Sec
Light Source	Hollow Cathode Lamp (HCL)*
Background correction	Deuterium Lamp (D2)*
Burner	Titanium Construction Premix, Laminar flow, 100 mm
Fuel	Acetylene (C2H2)
Oxidant	Air/Nitrous Oxide (N2O)
Flow Control	Integral gas control system with panel flow meters
Nebulizer	Pneumatic, with 90% Platinum, & 10% Iridium alloy Capillary*
Sample Feed Rate	3 to 8 mL/min (Adjustable)
Monochromator	Czerny Turner 300 mm with 1200 lines/mm Holographic diffraction grating & Hard coated optics
Slits	Bilateral continuously variable of 0.15 to 3.0nm spectral bandwidth
Detector	Wide Range Photomultiplier tube (PMT)
Readout	24x2 Dot matrix LCD panel with backlight of 2.70 x 5.5mm character size
Power Supply
HC Lamp	0 to 30 mA, modulated
D2	15 to 300 mA, modulated
PMT	-200 to -1000 V
Power requirement	230 V ± 10%, 50 Hz, 1 , Max. 200 VA

Our flame photometer is globally appreciated for its features including dimensionally accurate, compact designs, easy operation and heat resistant. The instrument is developed using grade raw material and technology. It is available to our clients in customized packaging ensuring scratch free flame photometer dispatched at client end.

Features:

• Dual Channel
• Concentric Non-corrosible Nebulizer
• Mixing Chamber designed for stable flame
• Flame System: Stainless Steel round burner with LPG as Fuel & Air as Asoxidant and stainless steel needle type regulator
• Narrow Band interference Filters
• Small quantity of sample needed

Applications:

It finds applications for measurement of Concentration of Alkali & Alkali earth metals (Sodium, Potassium, Calcium & Lithium) in geological & agricultural soil testing, pollution monitoring & control, food & beverage testing and cement. In addition, it is also used to measure the concentration of the alkali and alkali metals in coal, chemicals, ash, fuel & greases, crude oil, glass, acids, pharmaceutical and other industries.

With our industrial experience gained in a decade, we develop high performing brookfield viscometers. These are designed and fabricated in compliance with the global standard. In addition, it is also offered as per the technical specifications provided by our clients. It finds application for measurement of viscosity at high shear rates. It uses less than 2 ml of sample and thus helps in avoiding excess cleaning and material costs. Other features of our brookfield viscometers include following:

• LCD display of viscosity in Poise or Pascal-seconds
• Automatic viscosity range calibration and cone gap positioning make the viscometer easy to use
• Set the viscometer to take a reading at different timed intervals to ensure accuracy of results with thixotropic fluids.

We specialize in designing and manufacturing precision engineered horizontal gel electrophoresis unit. Backed by our proficient team, we develop the unit as per the industry standard. It is specially designed for analysis of 10 samples and 1 marker. A gel-casting tray of size 110mm x 90 mm along with an 11 well comb are provided the horizontal unit. Other accessories including a safety lid and electrical connectors are also offered with it.

Our company offers wide range of UV-VIS spectrophotometer which is fabricated in conformity with international standard. The collection is also designed and developed in accordance with the client specifications and requirements. It finds application in laboratories, research institutes, textile & leather industry and many others.

Following are the features of our compact UV-VIS spectrophotometer:

• Microcontroller based
• High Signal to Noise ratio
• Stable single beam optics
• Push button selection of % T, Abs & Conc.
• Compact, Modular & ergonomically designed
• Simple selection of four position sample holder
• Accommodates cuvettes of upto 40mm path length

Its applications are in determination of

• Nutrients like N, P, K, S, Ca, Mg, Zn, Cu, B, Mo etc., in Agricultural soil, plants and others
• Organic components in Plants and Biological matter
• Glucose, fructose, carbohydrates, proteins etc, in foods
• Edible dyes alcohols etc., in beverages
• Purity of constituents in pharmaceuticals
• Toxic elements Cd, Pb, Hg etc., in effluents
• Constituents in compositions used in metallurgy, fertilizer, pesticide, chemical,
• petrochemical, steel, cement, glass & other industries.

Specifications:

Spectral
Range	190 to 1000 nm
Bandwidth	2 nm
Accuracy	± 0.5 nm
Repeatability	± 0.2 nm
Readout	4 digit 7 segment LED Display of 12.7 mm height
Readability	0.1 nm
Photometric
Range	0 to 2 Abs
Accuracy	± 0.005 Abs. at 1.0 Abs ± 0.010 Abs. at 1.5 Abs
Repetability	± 0.002 Abs. at 1.0 Abs
Stability	± 0.003 Abs/hr. after 2 hr. warm up
Stray light	< 0.1% T at 302 nm
Readout of Abs., %T & C	3½ digit 7 segment LED Display of 12.7 mm height
Readability	± 1 Count
Light Sources	Deuterium(D2) & Tungsten (W) Halogen Lamps
Monochromator	Czerny Turner with High resolution 1200 lines/mm Holographic Grating
Detector	Wide range Photo Diode
Power Requirement	230 V ± 10%, 50 Hz, 1 ,Max. 150 VA

We specialize in designing and manufacturing precision engineered colorimeter in compliance with industry standard. The instrument is also developed as per the client specifications and requirements. It is highly in demand in laboratories, clinics and pharmaceutical industry for determining concentration of constituents in medical institute, textile industry and others. It also finds application in food, beverage & water analysis. In addition, it is also used in analytical & agricultural chemistry and metallurgy.

Features:

• Stable, Direct Readout of Absorbance
• Compact & Easy to operate
• Rugged, Sturdy & Reliable
• Thumb Wheel Selection of Filters
• Pre-focused Light Source
• Long Life Photo Diode Detector
• Only 1 ml of Sample need
• Usable for Disposable cells

Specifications:

Photometric
Range	-0.1 to 1.99 Abs
Repeatability	± 0.01 Abs
Stability	± 0.01 Abs in 8 h
Light Source	Tungsten Lamp
Filters (8)	Peak Transmission at 450, 470, 490, 520, 540, 570, 600 & 670 nm
Shutter	To prevent the detector from continuous exposure to light
Detector	Photo diode
Readout	2½ Digit 7 segment LED display of 12.7mm height
Power Requirement	230 V ± 10%, 50 Hz, 1 , Max. 20VA
Physical Dimensions
Size (WxDxH) in mm	270 x 180 x 110
Weight in Kg.	Approx. 3.0
Accessories Supplied
With Instrument	Matched 3 mL test tubes, holder for 10mm path length glass cuvettes disposable cells
At Extra cost	Glass cuvettes & disposable cells

Our HPLC System is precisely engineered in conformity with global standard. It is widely acknowledged for dimensionally accurate, compact designs, easy operation and heat resistant. Our collection finds wide application in laboratory, research institute and many others.

Isocratic Pump

Following are the technical specifications of isocratic pump:

• Flow: 0. 01-10mL/min / 0.001-9.999
• Max. Pressure: 40MPa
• Dual Piston designed with main and auxiliary pump heads connected in series

Intuitive operating using simple keypad allows easy chose functions as follow:

• Flow rate
• Maximal flow rate – PURGE (for priming and washing)
• Low pressure
• High pressure limit
• Pulsation compensation on-off
• Pressure unit (PSI,Mpa or bar)
• Control mode (by keypadm RS 232 or using voltage)
• Display brightness
• Possibility to use this pump by high pressure gradient mode, where are two three or four unit controlled from PC using RS232 or voltage

UV-VIS Variable Wave Detector

Our highly efficient UV-VIS variable wave detector is precisely engineered as per the industry standard. Following are specifications of the detector:

• Detector Wavelength Range : 190-600 nm (Optional:600-800nm)
• Noise Level: +/-0.3 x 10-5 AU
• It may be used for analytical chromatography as well as preparative chromatography
• Reference and sample signals available for detector diagnostics as well as information on lamp operating hours
• Out put signal is both digital and analogue
• It is possible to control the unit using the keypad or an RS232 interface
• D2 lamp in a special socket that enables easy changing
• Wavelength can be programmatically changed
• Automatic Wavelength Calibration.

Our company offers compact designed potentiometers to our clients. Fabricated in compliance with the international standard, the range is globally accepted for its high performance. Our assortment is used for potentiometeric measurements. Results of the instrument are displayed by light emitting diodes (LED) in milli volts on a direct digital readout.

Specifications:

Range	0 to+ 1999.9mV
Resolution	1 mV
Repeatability	+ 1 mV
Accuracy	+ 1 mV +digit
Input Impedancy	10 ohms
Operating Temperature	10 to 50oC
Display	3 1/2 Digit 0.5 seven segment LED display Indication
Power	230V + 10%AC, 50Hz
Dimensions	76 x 275 x 170 mm.
Weight	2 Kg (approx.)
Standard Accessories
Electrode	2 Nos.
Dust Cover	1 No.
Electrode Stand	1 No.
Manual	1 No

Our tablet dissolution test apparatus is developed from grade raw material. With the support of our proficient team, the apparatus is designed and manufactured as per the USP Standard. Featured with defect free structure, dimensionally accurate and light in weight, the apparatus is widely accepted by our reputed clients. It efficiently works for single tests of capsules or tablets.

We specialize in designing and developing precision engineered tablet hardness tester. Our tester can be fitted on either bench or tablet ling machine. It is offered with various precision engineered components including engineered Dial Gauge, Aluminium Body and others. Follow pointer records force on Dial Gauge while main pointer goes back to zero.

Specifications:

• Capacity 0-200 Newtrons
• Accuracy + 5 Newtrons

Our digital turbidity meters are globally known for giving reliable and accurate results. The digital turbidity meter is fitted with 3 ½ digit LED Display which can measure upto 1000 JTU. It finds applications in sewage and drinking water testing. Our collection is acknowledged for defect free structure, dimensionally accurate and light in weight.

Measurement:

Range	0 to 200 JTU 0 to 1000 JTU 2 Ranges	0 to 20.00 NTU 0 to 200.00 NTU 2 Ranges
Resolution	1 JTU	0.1, 1 NTU
Accuracy	+3% FS + 1 digit	+2% FS + 1 digit
Sample System	30 mm clear glass tube	30 mm clear glass tube
Light Source	6.8 V, Tungsten Lamp	6.8 V, Tungsten Lamp
Detector	Photodiode	Photodiode
Display	3 1/2 digit LED display	3 1/2 digit LED display
Power	220V+ 10% AC 50 Hz	220V+ 10% AC 50 Hz
Size (LxBxH)	305 x 305 x 165 mm	305 x 305 x 165 mm
Weight	4 kg (approx.)	4 kg (approx.)
Accessories	Test Tube Set, Operation Manual & Dustcover
Other Models	Analog Nephelometer Battery cum Mains Operated also Available
Product Range	Photo Colorimeters, Spectrophotometers, Digital pH Meters, Conductivity/TDS Meters, Turbidity Meters, Digital D.O. Meters, Water & Soil Analysis Kits

We design and fabricate precision engineered Karl Fischer moisture titrator. Available in various specifications, the titrator can be customized in accordance with client requirements. Featured with compact designs, easy operation and efficiency, our assortment has received wide accolade in diverse industries.

Specifications of our most advanced Karl Fischer moisture titrator are tabulated below:

Range	0.1mg - 500mgH2O, 10ppm - 100%H2O
Burette	Capacity 10mL x 2 Precision ±0.015mL
Display	30 digits x 7 lines LCD with back light
External I/O	1. Printer 2. Balance 3. Computer via RS232C
Output	H2O, concentration, dialogue messages
Ambient condition	5 - 35°C, less than 85%RH
Power	100 -120/200-240V AC, 50/60 Hz
Power consumption	35W
Dimension	Main: 288(W) x 468(D) x 629(H) mm Stirrer: 120(W) x 225(D) x 320(H) mm Solvent change unit: 240(W) x 170(D) x 405(H) mm
Weight	13.5kg

We specialize in designing and fabricating superior quality water and soil analysis kit. It is made available to our clients with 3 ½ digit LCD Display. Our efficient kits are mains cum battery operated. It gives accurate result for soil and water analysis. Some of the salient features of our range:

• Measures pH, mV, Conductivity
• TDS, DO, Temperature & Turbidity
• Housed in VIP Briefcase

Measurements:

Model pH	Range	SI - 60	SI - 61	SI - 62
		0 to 14pH	0 to 14pH	0 to 14pH
	Temp. Comp.	0oC (Manual)	0oC (Manual)	0oC (Manual)
	Resolution	0.01pH	0.01pH	0.01pH
	Accuracy	+0.01 pH	+0.01 pH	+0.01 pH
O.R.P./mV	Range	N.A.	0 to + 1999 mV	0 to + 1999 mV
	Resolution	0.01pH	N.A.	1 mV
	Accuracy	N.A.	+ 1 mV + 1 digit	+ 1 mV + 1 digit
Conductivity	Range	1	5	5
	Cell Constant	0.4 - 1.5 Adj	0.4 - 1.5 Adj	0.4 - 1.5 Adj
	Resolution	0.1 Micro mhos	0.1 Micro mhos	0.1 Micro mhos
	Accuracy	+ 0.5% FS	+ 0.5% FS	+ 0.5% FS
Temperature	Range	0o - 100oC	0o - 100oC	0o - 100oC
	Resolution	0.1oC	0.1oC	0.1oC
	Accuracy	+0.1oC + digit	+0.1oC + digit	+0.1oC + digit
T.D.S.	Range	1	5	5
	Cell Constant	0.4 - 1.5 Adj	0.4 - 1.5 Adj	0.4 - 1.5 Adj
	Resolution	0.1ppm	0.1ppm	0.1ppm
	Accuracy	+5% FSD	+5% FSD	+5% FSD
D.O.	Range	0-20 ppm	0-20 ppm	N.A.
	Temp. Comp.	0.1 ppm	0.1 ppm	N.A.
	Resolution	+0.3 ppm	+0.3 ppm	N.A.
	Accuracy	5o to 50o (Manual)	5o to 50o (Manual)	N.A.
Turbidity	Range	0-1000 NTU/JTU	N.A.	N.A.
	Resolution	1 NTU/JTU	N.A.	N.A.
Display	Selenium Photocell	3 1/2 digit LCD display
Power Suppy	6.8v, 300mA	1.5V x 6 Dry Cells or 230V + 10% 50 Hz
Accessories	230v + 10% and In-built Battery	pH Combination Electrode, Conductivity / TDS Cell, DO Probe, Temp Probe, Standard Solution, D.O. Memberanes, Cell Container & Instruction Manual
Product Range	Photo Colorimeters, Spectrophotometers, Digital pH Meters, Conductivity/TDS Meters, Turbidity Meters, Digital D.O. Meters, Water & Soil Analysis Kits

Biochemical Oxygen Demand (BOD) test aims to determine the concentration of oxidizable and biodegradable organic compounds in water. The test most often runs for a five day period. Its widest application is in measuring waste loading of treatment plants, and in evaluating the efficiency of treatment processes. CheckLight scientific development team has developed a unique technology for determination of BOD in water in only 3-4 hours.


Features -CheckLight BOD Test :

• Principle-
The tested water sample is pre-hydrolysed with acid and exposed to the bacteria. The obtained level of luminescence reflects the concentration of utilizable organic carbon compounds in water.
• Bioassay -
Freeze-dried luminous bacteria.
• Fast -
Results are obtained within 3-4 hours.
• Sensitive -
A vast range of organic compounds can be detected at a wide concentration range.
• User-friendly -
Minimal lab experience is necessary. A simple three-step procedure. Only 1mL of sample is necessary to run the assay, making collection, storage and disposal of sample material easy and cheap.
• Equipment -
CheckLight luminometer, pipettor, tips.
• Reliable -
Good correlation was obtained against the standard BOD test for a given water source.
• Cost effective -
Low price encourages more frequent monitoring of treatment plant efficiency and allows rapid response to changing conditions.