Our range of compression testing machine are useful construction and to test the strength of concrete. With special attachments, our range can also be used for bricks. In addition, our products are used to test the strength of hallow or solid concrete blocks. Moreover, our compression testing machines consists of load frame with suitable platens and a pumping unit with pressure gauge, which can be operate electrically or hand operated. In our machines, load frame and pumping unit are connected by pressure pipes.

We offer a wide range of California bearing ratio apparatus, which are incorporated with load frame, hand operated available in capacity of 5000kg with high and low rates of travel of the lead screw.

Some of the specifications of our products are:

• Mould made from gun metal/brass, 150mm internal diameter x 175mm high with perforated base plate and extension coller 50mm high
  
• Perforated plate made of gue matal/brass 148mm dia with adjustable stem and lock nut and a metal tripod for dial gauge
  
• Cutting collar
  
• Rammer 2.6kg weight with drop of 310mm
  
• Rammer 4.89kg with drop of 450mm.

Our range of slump test apparatus are used for the determination of the consistency of freshly mixed concrete where the maximum size of the aggregate does not exceed 38mm. These consist of one slump cone with handles and foot pieces.

The specifications of our products are:

• Slump cone with internal dimension of 20mm diameter at base, 10cm top diameter and 30mm height
• Foot pieces are available, which can be fixed to the clamps on the base plate
  
• Base plate has lifting handle for easy transportation
  
• One graduated steel rod 16mm diameter x 600 mm long rounded at one end.

We offer cube moulds, which are available in different sizes and are made according to Indian and British standards. These are available with the following specifications:

Machined flat to + /-0.02mm accuracy and to +/-0.01 inches

Finished to within 0.2mm and 0.01

Moulds are incorporated with base plate.

We offer liquid limit device, which are used to determine the liquid limit of soil, determine the plasticity index and clayness of soil. These consist of brass cup held on an adjustable bracket. The cup can be adjusted for a fall of 1cm and can be raised and dropped on a rubber base of standard hardness by cam action. Further, our range is complete with one casagrande grooving tool, one ASTM grooving tool and a height gauger block of type A of AIS 9259.

Some of the application areas of our products are:

Construction of roadways, buildings etc.

Agriculture

Fertilizers

Mining

Many others.

Our range of rapid moisture meter are available in different technical parameters and specifications. These are completely designed in polished wooden carrying case with handle. Furthermore, our products are incorporated with the following specifications:

• Pressure vessel with clamp for sealing cap
  
• Rubber sealing gasket
  
• Pressure gauge calibrated in percentage moisture content 0-25% x 1% on the wet weight
  
• Counter poised balance for weighing sample
  
• Scoop for measuring carbide reagent
  
• Bottle for thorough mixing.

We offer a wide range of brass frame sieves, which are used in laboratory for forgiving chemical powders, medical powders, soil and cement etc. These are manufactured as per varied standards like ISS, BSS, ASTM, DIN and many others.

Our range of sieve shakers available in different specifications and dimensions. These are incorporated with sieve table dies, which do not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. When the stop pin-below the table is removed, the shaker can have a rotary motion. In addition to this, our product also have a gyrator motion of the table in which there is an pair of rods and a holder. The holder can be fixed on the top of the upper cycles phase, A.C supply and available net weight is approximately of 77kgs.

The specifications of our range include:

• Carries up to 7 sieves of 150mm or 200mm diameter
  
• Shaker is driven by ¼ h.p. motor through a reduction gear immersed in oil.

In addition to this, the accessories available with our products are:

• Adaptor for 30 cm.diameter sieves
  
• Time switch 0-60 minutes in 5 minutes graduation.