 |
|
Chemicals - Solvent & Acid
We offer a comprehensive range of quality chemicals, solvents, acids and laboratory chemicals that are listed below:
|

|  |
CAS No.64-19-7.
| Specifications | | Characteristics | Grade I | | Purity %w/w, (min) | 99.5 | | Water, ppm, (max) | 2000 | | Formic Acid, ppm, (max) | 1000 | | Total Chloride, ppm, (max) | 15 | | Total Iodide & CH3I, ppm, (max) | 10 | | Acetaldehyde, ppm, (max) | 500 | | Heavy Metal as Pb, ppm, (max) | 5 | | Propionic Acid & Higher Organic Acid, ppm, (max) | 200 | | Freezing Point (min),°C | 15.6 | | Solubility in Water | Soluble | | Non. Volatile, ppm, (max) | 50 | | Colour (APHA) | 10 | | Specific Gravity, 27°C/27°C | 1.0496 | | Initial Boiling Point (min),°C | 116.5 | | Dry Point (max),°C | 118 | | Appearance | Clear & Colourless | | Iron, ppm, (max) | 2 | | Sulfate, ppm, (max) | 15 |
|
|
CAS No.7697-37-2
| Specifications | | HNO3 Concentration | 61.5 +- 0.5% by wt. min., 68%, 72% | | Nitrous Oxide as HNO2 | 500 ppm max. | | Chloride as Cl | 10 ppm max. | | Sulphate as H2SO4 | 50 ppm max. | | Arsenic as As | 2 ppm max. | | Residue as Ignition | 100 ppm max. | | Heavy Metal as Pb | To pass the test | | Specific Gravity | 1.368 ar 25 deg C | | Flash Point | (-) 19 deg C |
|  |

|
|

|  |
CAS No. 144-62-7
| Name Of The Product |
Oxalic Acid |
| Reference Standard |
IS – 501 – 1976 |
| Physical Appearance |
Snow White Crystals |
| Assay As (COOH)2, 2H20 |
98-99% |
| Sulphated Ash |
Max. 0.15 % |
| Chloride (Cl) |
Max. 0.1 % |
| Sulphate (SO4) |
Max. 0.1 % |
| Heavy Metals (Pb) |
Max. 0.005 % |
| Iron (Fe) |
Max. 0.05 % |
| Magnesium (Mg) |
Max. 0.1 % |
| Molecular Weight |
126 |
|
|
CAS No. 77-92-9
| Specification: | | Appearance: | Colorless or White Crystalline powder. | | Clarity & Color of solution: | 20% water solution clarity. | | Content (Assay %): | 99.5% - 101% | | Moisture(%): | 7.5 - 9.0 | | Barium: | Pass. | | Calcium: | <=200 ppm. | | Iron: | <=50 ppm. | | Arsenic: | <=5 ppm. | | Heavy Metals | :<=10 ppm. | | Oxalate: | <=150ppm. | | Chloride: | <=50 ppm. | | Readily Carbonisble Substances: | Pass teh test. | | Sulphated Ash (%): | <=0.1% |
|  |

|
|

|  |
CAS No. 7664-38-2
| No | Characteristic | Specifications | | 1 | H3P04 Concentration | % | 86 | | | 2 | P205 | % | 62.3 | | | 3 | Iron as Fe | ppm | 10 | max. | | 4 | Sulphate as SO4 | ppm | 250 | max. | | 5 | Chloride as Cl | ppm | 10 | max. | | 6 | Flouride as F | ppm | 60 | max. | | 7 | Ca as Mg | ppm | 10 | max. | | 8 | Heavy Metals as Pb(Lead) | ppm | 10 | max. | | 9 | Arsenic as As | ppm | 1 | max. | | 10 | Colour | Water white | | Caution: Toxic by ingestion and inhalation. |
|
|
PRECIPITATED SILICA We can also supply as per customer requirement. CAS No. 112926-00-8
| PHYSIOCHEMICAL PROPERTIES OF PRECIPITATED SILICA (POWDER PRODUCTS) : BRAND : RISIL | | | | | | | | RISILsv-11 | | | | Appearance | | - | Snow White free flowing powder | | Behaviour towards water | | - | Hydrophilic | | Moisture (105°C) | | % | 5±1.5 | 5±1.5 | 5±1.5 | 5±1.5 | 5±1.5 | 5±1.5 | 5±1.5 | | Ignition loss (900° C for 2 hrs) | | % max | 6 | 6 | 6 | 6 | 6 | 6 | 6 | | Surface Area (BET) | | m2/gm | 100-115 | 130-150 | 140-170 | 160-200 | 240-260 | 115-125 | 290-320 | | Average Particle size | Primary | nm | 12-Oct | 18-20 | 16-18 | 12-14 | 10-Aug | 10-12 | 8-Jun | | | Secondary | µm | 14-16 | 10-Aug | 12-Oct | 10-12 | 14-Dec | 8-10 | 10-Aug | | Water Absorption | | % | 230-260 | 240-260 | 240-260 | 240-260 | 300-350 | 260-280 | 400-450 |
|  |

|
|

|  |
CAS No. 1310-73-2
| No | Characteristic | Specifications | | 1 | Sodium Hydroxide (as NaOH)- Dry Basis | % | 99.50 | min. | | 2 | Sodium Carbonate (as Na2CO3) | % | 0.40 | max. | | 3 | Chloride (as NaCl) | % | 0.10 | max. | | 4 | Iron (as Fe+++) | % | 20 | max. | | Caution: Exothermic Reaction with water, human tissues. |
Caustic Potash
CAS No. 1310-58-3
| No | Characteristic | Specifications | | 1 | Potassium Hydroxide (as KOH)(Dry basis) | % | 90.00 | min. | | 2 | Potassium Carbonate (as K2CO3) | % | 0.5 | max. | | 3 | Chlorides (as KCL) | ppm | 105.00 | max. | | 4 | Iron (as Fe++) | % | 10.00 | max. | | Caution: Harmful to animals and plant tissues, Corrosive |
|
|
CAS no 16291-96-6
| Specification of Unwashed Powder Grades | | Properties | | P-100 | P-150 | P-200 | P-250 | P-280 | P-320 | | M B Value | Mg/g | 100 | 150 | 200 | 250 | 280 | 320 | | KMno4 | %min | 25 | 25 | 45 | 55 | 60 | 70 | | Ash | %max | 25 | 15 | 10 | 10 | 10 | 10 | | Iron (ppm) | max | 1000 | 1000 | 800 | 800 | 600 | 500 | | Acid Soluble (HCL) | %max | 10 | 10 | 10 | 10 | 10 | 10 | | Water Soluble | %max | 5 | 5 | 3 | 2 | 2 | 1 | | L.O.D | %max | 10 | 10 | 10 | 10 | 10 | 10 | | C1 & SO4 | max |
.
USP
..
| | Ph | |
..Alkaline
. | | Particle Size | |
98 % Passes through 100 Mesh
. |
|  |

|
|

|  |
CAS No. 7722-84-1
| No | Characteristic | Grade--> | 35%H202w/w | 50%H202w/w | 60%H202w/w | | 1 | Stability | ** | 0.3 | 0.3 | 0.3 | | 2 | Acidity (as H2SO4) | g/100 ml | 0.03 | 0.03 | 0.07 | | 3 | Non-Volatile residue | g/100 ml | 0.15 | 0.2 | 0.2 | | 4 | Residue on Ignition | g/100 ml | 0.05 | 0.05 | 0.05 | | 5 | Iron (as Fe) | ppm | 1.00 | 1.00 | 1.00 | | 6 | Copper (as Cu) | ppm | 0.10 | 0.10 | 0.10 | | 7 | Arsenic (as As2O3) | ppm | 2.0 | 2.0 | 2.0 | | 8 | Lead (as Pb) | ppm | 10.0 | 10.0 | 10.0 | | ** - ml. of O2/25 ml at 100oC for 30 minutes |
|
|
Ethyl Acetate
| Chemical Identity | | Name | Ethyl Acetate | | Classification | Ester | | Synonyms | Acetic acid, Ethylester, Acetic Ether, Acetoxyethane | | Molecular Formula | C4H8O2 | | Molecular Weight | 88 | | Shipping Name | Ethyl Acetate | | Codes / Label | Flammable Liquid, Class 3 | | Hazardous Waste ID No | 5 | | UN No | 1173 | | Specifications | | Appearance | Clear, Colourless | | Odour | Characteristic | | Solubility | Freely soluble in alcohol and acetone | | Relative density at 27°C/27°C | 0.895 - 0.898 | | Residue on Evaporation wt.% (max.) | 0.01 | | Acidity (as acetic acid) wt.% (max.) | 0.01 | | Ester content (as ethyl acetate) wt.% by GLC (min) | 99.8 | | Distillation Range | | | a) Initial boiling point at 760 mm Hg (min), °C | 76.0 | | b) Dry Point at 760 mm Hg. (max), °C | 78.5 | | Water content wt.% (max) | 0.05 |
|  |

|
|

|  |
CAS No. 67-56-1
| | ASTM D 1152-89 | Typical Analysis | | Purity (Wt.%) | 99.85 | 99.85 | | Specific gravity 20/20 Deg.C | 0.7920 - 0.7930 | 0.7920 | | Colour | Not more than No.10 on the Platinum-Cobalt scale | Passes | | Distillation Range | Not more than 1 Deg.C to include 64.6 +,- 0.1 Deg.C | IBP (Deg.C) 64.4 FBP (Deg.C) 65.3 | | Non-Volatile Matter mg/100 ml | No more than 5 | Less than 5 | | Odour | Characteristic, Non-residual | Characteristic, Non-residual | | Water (Wt. %) | Not more than 0.10 | 0.05 | | Acidity (Free Acid as Acetic Acid) (Wt.%) | Not more than 0.003, equivalent to 0.028 mg. KOH per gram of sample | 0.0024 | | Acetone (Wt.%) | Not more than 0.003 | 0.002 | | Hydrocarbons | To pass test | Passes | | Sulphuric Acid Wash Test (Carbonizable impurities) | Not more than No.30 on the Platinum-Cobalt Scale | Passes | | Potassium Permanganate Test | Not less than 50 minutes | Passes |
|
|
We are developed alternative (BA-18) for Acetic Acid Glacial 99% which can be use for any kind of textile material for PH controller & washing agent. It gives better result than any other Ph controller or Acetic Acid. Cost of our product is cheaper than Acetic Acid Glacial 99%. Our product specification & use is as follows. Specification of BA- 18 Appearance: Colorless transparent liquid PH: 2.0 Solubility: Soluble in all proportion of water Nature: AN-IONIC Acid Value: 22 Mg NaoH/grm Bio Degradability: Completely biodegradability & Eco friendly NVC: 100% Volatile Stability: Stable in hard water & maintain quickly Dosage: 2.0 to 2.5 GPL in hard water (400 ppm) Sulphate: Absent Chlorine: Absent Comparison of BA-18 & Acetic Acid 98% PH OF WATER : 7.8 HARDNESS OF WATER : 420 ppm
| Usage of product ( GPL in water ) |
PH Control with BA-18 |
PH control with acetic Acid 98% |
| 0.5 |
6.6 |
5.6 |
| 1 |
6.2 |
4.8 |
| 1.5 |
5.8 |
4.5 |
| 2 |
4.9 |
4.3 |
| 2.5 |
4.2 |
4.2 |
| 3 |
3.9 |
4 |
| 4 |
3.7 |
3.9 |
| 5 |
3.5 |
3.8 |
| 10 |
3.1 |
3.5 |
Please do not use BA-18 more than the quantity recommended above. It will give the expected result with above usage in above condition of water.
|  |

|
|
|
|