Chemicals

We are developed alternative (BA-18) for Acetic Acid Glacial 99% which can be use for any kind of textile material for PH controller & washing agent. It gives better result than any other Ph controller or Acetic Acid.
Cost of our product is cheaper than Acetic Acid Glacial 99%. Our product specification & use is as follows. Specification of BA- 18
Appearance: Colorless transparent liquid
PH: 2.0
Solubility: Soluble in all proportion of water
Nature: AN-IONIC
Acid Value: 22 Mg NaoH/grm
Bio Degradability: Completely biodegradability & Eco friendly NVC: 100% Volatile
Stability: Stable in hard water & maintain quickly
Dosage: 2.0 to 2.5 GPL in hard water (400 ppm)
Sulphate: Absent
Chlorine: Absent

Comparison of BA-18 & Acetic Acid 98%
PH OF WATER : 7.8
HARDNESS OF WATER : 420 ppm

Usage of product ( GPL in water )	PH Control with BA-18	PH control with acetic Acid 98%
0.5	6.6	5.6
1	6.2	4.8
1.5	5.8	4.5
2	4.9	4.3
2.5	4.2	4.2
3	3.9	4
4	3.7	3.9
5	3.5	3.8
10	3.1	3.5

Please do not use BA-18 more than the quantity recommended above. It will give the expected result with above usage in above condition of water.

CAS No. 67-56-1

	ASTM D 1152-89	Typical Analysis
Purity (Wt.%)	99.85	99.85
Specific gravity 20/20 Deg.C	0.7920 - 0.7930	0.7920
Colour	Not more than No.10 on the Platinum-Cobalt scale	Passes
Distillation Range	Not more than 1 Deg.C to include 64.6 +,- 0.1 Deg.C	IBP (Deg.C) 64.4 FBP (Deg.C) 65.3
Non-Volatile Matter mg/100 ml	No more than 5	Less than 5
Odour	Characteristic, Non-residual	Characteristic, Non-residual
Water (Wt. %)	Not more than 0.10	0.05
Acidity (Free Acid as Acetic Acid) (Wt.%)	Not more than 0.003, equivalent to 0.028 mg. KOH per gram of sample	0.0024
Acetone (Wt.%)	Not more than 0.003	0.002
Hydrocarbons	To pass test	Passes
Sulphuric Acid Wash Test (Carbonizable impurities)	Not more than No.30 on the Platinum-Cobalt Scale	Passes
Potassium Permanganate Test	Not less than 50 minutes	Passes

PRECIPITATED SILICA – We can also supply as per customer requirement. CAS No. 112926-00-8

PHYSIOCHEMICAL PROPERTIES OF PRECIPITATED SILICA (POWDER PRODUCTS) : BRAND : RISIL
							RISILsv-11
Appearance		-	Snow White free flowing powder
Behaviour towards water		-	Hydrophilic
Moisture (105°C)		%	5±1.5	5±1.5	5±1.5	5±1.5	5±1.5	5±1.5	5±1.5
Ignition loss (900° C for 2 hrs)		% max	6	6	6	6	6	6	6
Surface Area (BET)		m2/gm	100-115	130-150	140-170	160-200	240-260	115-125	290-320
Average Particle size	Primary	nm	12-Oct	18-20	16-18	12-14	10-Aug	10-12	8-Jun
	Secondary	µm	14-16	10-Aug	12-Oct	10-12	14-Dec	8-10	10-Aug
Water Absorption		%	230-260	240-260	240-260	240-260	300-350	260-280	400-450