Our concern stands high in terms of supplying premium range of fire fighting submersible pump which used for applications in terms of fire fighting. These submersible pumps deliver highly rated service in terms of efficiency, accuracy and functionality. These submersible pumps provide higher safety solution to prevent fire and other hazards. Following are the features of our product:

• User-friendly
• Durable
• Minimum maintenance
• Resistance to extreme temperature variations

We are a recognized name in manufacturing portable sumbersible sewage pumps which are specially designed self priming pumps ideal for pumping liquid with high contamination. Following are the essential features our our submersible sewage pump

Application : For pumping sewage, industrial waste, storm water, sludge, effluents, paper and pulp, muddy water etc.

Drive: Vertical Submersible motor and extended shaft for Impeller.

Speed 2900 RPM & 1450 RPM

Power: 3 HP to 300 HP

Performance range :

• Capacity - 100 LPM TO 27000 LPM
• Head - Upto 100 Mtr.
• Solid handling capacity - upto 100 mm.

Catering to various applications like fertilizers, refineries, petrochemicals and others, we have come with vertical submerged pumps. These pumps are available in economical prices and we ensure that we do not compromise o the quality aspect. Following are some of the essentials of our product:

Capacities: Our pumps cover a range of capacities extending to 700 M.cu/hr. at 1450 rpm, and 300M.cu/hr_ at 2900 rpm. Head range upto 100 mtrs. Pump Suspension Depth upto 6 mtrs. Its temperatures extend from -30°C to +180°C, depending on the material of construction.

Design features: These pumps are centrifugal type of single stage with semi open impellers at bottom. The pumps can easily handle liquids, contain solids and have a tendency to polymerize or crystallize. Its advantageous feature lies in easy maintenance, simple mounting arrangement and requires no foundation.

Base plate: From our end, we supply standard range of base plate in mild steel. In case of requirement, cladding of competitive material can be given. Its vapor proof sealing can be given as per operating conditions.

Shaft coupling: These are designed on the principle of muff and it is coupled with split rings to support the weight and reduce the run out to negligible value. (Not applicable less than 1 Mtr. Pump S.D.)

Flushing: Its is self operational from casing discharge to all bearing bush in case of clear liquid and from external source by piping from base plate for handling liquids. These contain clogging material which is not affected by mixing of flushing liquid.

Jacketed pumps Our pumps can be supplied with jacketed construction which is suitable for high temperature and pressure for handling liquids which solidify at ambient or above ambient temperatures.

Our portable submersible pumps is used for dewatering from building construction sites (Water mixed with Saline, Oil, Ash etc.), Hydro / Thermal Power Stations, Mines, Sugar Mills, Municipalities, Steel, Cement Plant etc. Its pump is driven by transformer oil filled Submersible electric motor and the oil which acts as lubricant in the motor and keeps it cool and pump shall work even without being fully submerged. The submersible dewatering pump is economically accessible and portable. Following is the construction of our submersible dewatering pump:

Construction: The submersible dewatering pump below and motor above and suction inlet is at the bottom so that water is pumped from the lowest level and discharge outlet is at top. The motor (Squirrel cage-induction type) is protected against the contamination from surrounding water by mechanical seals. All parts are made from specially selected material to withstand against high abrasion and corrosion. It is portable pump and can be easily shifted to alternative site for reinstallation and withdrawal of the unit as well as replacement of normal wearing parts on site with minimum amount of labor. For fixing, no foundation or pump house is required and the pump can be installed in vertical, horizontal or inclined position.

Our concern presents cost effective and user-friendly Dewatering pumps. This pump is used for dewatering from Building Construction sites (Water mixed with Saline, Oil, Ash etc.), Hydro / Thermal power stations, mines, sugar mills, municipalities, steel, cement plant etc. In it the dewatering pump is driven by transformer oil filled Submersible electric motor. The oil which acts as lubricant in the motor and keeps it cool and pump shall work even without being fully submerged. Following is the construction of our dewatering pump:

Construction : Dewatering pump below and motor above and suction inlet is at the bottom so that water is pumped from the lowest level and discharge outlet is at top. The motor (Squirrel cage-induction type) is protected against the contamination from surrounding water by mechanical seals. All parts are made from specially selected material to withstand against high abrasion and corrosion. It is portable pump and can be easily shifted to alternative site for re installation and withdrawal of the unit as well as replacement of normal wearing parts on site with minimum labor. For fixing, no foundation or pump house is required. The pump can be installed in vertical, horizontal or inclined position.

Our SVP-BL series pumps are extensively used for sewage and are effluent for any abrasive liquid. These sewage pumps work at a speed of 750, 1000, 1450, 2900 R.P.M. Its head is upto 150 mt and the discharge work is performed upto 1500 m3 / Hr. Following are some features of our sewage pump:

• Very high efficiency
• Clear replacement of vertical turbine
• Cost effective
• Minimum maintenance
• No wear parts

We present a qualitative range of dredging pumps which are versatile in operation and deliver peak performance. These dredging pumps can be easily identified with their efficiency and accuracy in working. Following are some of the features of our dredging pumps are:

• Simple in operation
• Long lasting
• Minimum maintenance
• Resistance to extreme temperature variations

We are a trusted name in manufacturing and supplying horizontal centrifugal pumps which are simple in operation and this is why find applications in industries like chemical, petrochemicals, refineries, fertilizers, and many more. Following are the essential features of our horizontal centrifugal pumps:

Capacity: Our horizontal centrifugal pumps covers a range of capacities extending to 700 M.cu/hr. at 1450 rpm, and 300M.cu/hr_ at 2900 rpm. Head range upto 145 mtrs. Its design pressures are 25 bars and process temperatures extend from -40°C to +300°C, depending on the material of construction.

Materials: All parts that come into contact with the liquid are made up of cast iron, ductile iron, rubber lined, cast steel, bronze, Ni-Resist, Ni-Cast iron, Stainless steel, Alloy-20, R.52, R.53, R.55, Hastally-C, Hastally-B and other Alloy grades as per operating conditions.

Design features: Our centrifugal process pumps are of single stage, horizontal end suction type, with semi open impellers. The semi open impellers are used / supplied where liquids, containing solids, or have a tendency to polymerize or crystallize. A special feature is easy of maintenance due to the foot mounted volute casing which permits removal of the rotating assembly without disturbance of pipe connections. From our end, an extensive choice of materials of construction is offered enabling a wide range of chemicals to be handled. The casing assembly is hydrostatically tested to a minimum of 1.5 times the shut-off pressure. Various additional non-destructive testing procedures are carried out as standard practice on all pump parts.

Our polder pumps are suitable for lifting water from canals and river beds, dam sites, disposal of waste water. The construction of the polder pump is of pump below, and motor above, type and suction inlet is at the bottom, so that water is pumped from the lowest level. The polder pump is driven by water filled submersible electric motor, squirrel cage induction type and the water acts as a lubricant in the motor and keep it cool. The motor is protected against the contamination from surrounding water by mechanical seal.

All parts are made from specially selected material so as to suit high abrasion and corrosion. The polder pump can be easily installed in vertical, horizontal or inclined position. It is portable pump easily shifted to alternative site for re installation and withdrawal of the unit as well as replacement of normal wearing parts on site with minimum labor. The polder pump is one or two stage, available in all material except that soft metal. such as lead or metal so hard as not to be readily machinable. The polder pumps are available upto 30,000 LPM capacity and 200 Mtrs. Its head is in 1450 RPM and 2900 RPM.