The select International's Sector Directional Antennas provide 15, and 21, dBi gains with a wide beam-width. Comprising of a professional quality "cell site" these base station antennas are designed primarily for the carrier-class applications and service providers using the 2.4 GHz ISM band. These base station sector antennas are packaged with a directional orientation bracket which makes the main beam width and angle adjustable, when the antenna is installed on the top of a mountain, radio tower or high-rise building. This feature provides maximum signal strength for both reception and transmission in the desired area. in addition, the directional characteristic permits the user to easily adjust the transmitting and receiving angle of their antenna, and is designed specifically for outdoor building-to-building application with buildings of various heights. Inscape Data offer four different types of sector antennas:
The S-2424G High-Performance Reflector Grid Antenna gives 24 dbi gain with an 8 degree beam-width for highly directional long-range applications. Applications allow point to point systems, point to multi-point and wireless bridges in the 2.4GHz ISM band as well as IEEE 802.11b, 802.11g & wireless LAN systems. This 24 DBI parabolic grid antenna can also be easily installed for either vertical or horizontal polarization.
The select International's Sector Directional Antennas provide 15, and 21, dBi gains with a wide beam-width. Comprising of a professional quality "cell site" these base station antennas are designed primarily for the carrier-class applications and service providers using the 2.4 GHz ISM band. These base station sector antennas are packaged with a directional orientation bracket which makes the main beam width and angle adjustable, when the antenna is installed on the top of a mountain, radio tower or high-rise building. This feature provides maximum signal strength for both reception and transmission in the desired area. in addition, the directional characteristic permits the user to easily adjust the transmitting and receiving angle of their antenna, and is designed specifically for outdoor building-to-building application with buildings of various heights. Inscape Data offer four different types of sector antennas:
This enclosure has been specifically designed to house most forms of wireless circuitry, through providing ample internal space as well as a flexible mounting system to adapt to any electronics module. The unit ships with a very sturdy pole-mounting bracket. The CAT5 cable enters through a weatherproof gland (pass-through). There is a 15dBi, 2.4GHz panel antenna integrated into the front cover (with an SMA Female connector). It allows for very fast and cost-effective assembly of good-looking and great performing wireless CPE's (Customer Premises Equipment). This allow There is even space for up to 4 external antenna connectors on the base, should the unit be linked to external antennas in addition to the internal panel.
The very design of the Omni-Directional select ANT1500 antenna offers miraculously enhanced wireless signal coverage in all directions. With a 360° of better signal reception, this high-gain omni-antenna will also improve data throughput at further distances. The PtMP capability permits the ANT1500 to operate as a single directional antenna, which sends the signal in one direction, as well as a bi-directional antenna, which sends the signal out 360° degrees from a single point.
Our Patch Antenna consists of a patented low- cost, high-efficiency, circuit design which is enclosed in a UV stabilized ABS plastic radome with steel backplane for superior durability in changing weather conditions. The circuit of the antenna is DC grounded to offer protection from lightening. A pole and wall mounting kit is also provided with each patch antenna.
Power over Ethernet technology, or PoE technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. This PoE technology is very useful for powering IP telephones, wireless LAN access points, web cams, Ethernet hubs, embedded computers, and other appliances where it would be inconvenient or infeasible to supply power separately. The technology is somewhat comparable to POTS telephones, which also receive power and data (although analog) through the same cable. It works with an unmodified Ethernet cabling infrastructure.
Power over Ethernet technology, or PoE technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. This PoE technology is very useful for powering IP telephones, wireless LAN access points, web cams, Ethernet hubs, embedded computers, and other appliances where it would be inconvenient or infeasible to supply power separately. The technology is somewhat comparable to POTS telephones, which also receive power and data (although analog) through the same cable. It works with an unmodified Ethernet cabling infrastructure.
The Sector antenna systems devised and designed by Select International are produced from rigid aluminum extrusion, and are powder coated, lightweight, and weatherproof units. These Sector Antennas feature 50 ohm passive feeds which come standard with type N female connectors. The super heavy -duty single point galvanized bracket system, is designed for increased ease of installation, and pole-top mounting facilitated downtilt adjustment accuracy. The brackets offer 10deg of mechanical downtilt. The N connector is positioned on the front/transmission side of the sector.
Ours Box Weatherproof Enclosures are perfectly suitable for remote WLAN WiFi equipment installations, indoor and outdoor, hot and cold temperature environments, corrosive environments, sub-zero installations, hotspot applications and protection of equipment from theft or damage. These are available with a wide range of options including heat, cooling and Power-Over-Ethernet interfaces.
In addition to the standard enclosure products, Select International also manufactures enclosures based on various customized customer requirements for large-scale projects. Previous projects have included enclosures for 220 VAC applications. But our custom enclosures require a minimum quantity purchase. If you have a project with the requirement for a substantial number of custom enclosures, please contact Select International to discuss your project requirements.
Ours Box Weatherproof Enclosures are perfectly suitable for remote WLAN WiFi equipment installations, indoor and outdoor, hot and cold temperature environments, corrosive environments, sub-zero installations, hotspot applications and protection of equipment from theft or damage. These are available with a wide range of options including heat, cooling and Power-Over-Ethernet interfaces.
In addition to the standard enclosure products, Select International also manufactures enclosures based on various customized customer requirements for large-scale projects. Previous projects have included enclosures for 220 VAC applications. But our custom enclosures require a minimum quantity purchase. If you have a project with the requirement for a substantial number of custom enclosures, please contact Select International to discuss your project requirements.
Twin Antennas, Vadodara Exporting and manufacturing of antennas, omni antennas, base station antennas, cpe splitters, cell phone antennas, cellular antennas, direactional antennas, dish antennas, helical antennas and panel antennas.
Pristine Engg. Service Manufacturing, exporting and supplying of aerial cables which includes bunched aerial cables, electric aerial cables, industrial aerial cables and insulated aerial cables.
Processing...
