Mechanical pump seal

The exclusive gamut of conical spring seal offered by us is of top-notch quality and caters to the requirements of the clients.  These seals are available indifferent seal faces such as; Carbon, Tungsten Carbide, Silicon Carbide, Ceramic, We also provide these seals in different sizes ranging from 12mm to 100mm with elastomers like Vition, Silicon, PTFE, Neoprene, Nitrile. Apart from this, these seals work effectively at temperatures of 30 Deg C to 200 Deg C with pressure of up to 10 bars.
 
Specifications:

• Seal Faces Available: Carbon, Tungsten Carbide, Silicon Carbide,Ceramic, stellite
  
• Sizes Available: 12mm to 100mm
• Elastomers: Vition, Silicon, PTFE, Neoprene, Nitrile
• Temperature: -30 Deg C to 200 Deg C
• Pressure: up to 10 Bars..

The single spring seal design is most commonly used design. this design is most flexible for some longitudinal moved shaft . the size available for this design is from 12 mm to 150mm

Due to single spring design the seal is not dynamically balanced. So the shaft  speed is maximum up to 1440rpm.  the seal face is drive by spring. so with higher speed it is much possible for slippage of drive. For limited speed pumps the same product will give much life.


Features
pressure             : up to 10 bars
temperature        : -20 to 200 degree c
rotary face          : Carbon, Sic
stationary face    : carbon Sic Ceramic, Tc
Elastomers         : Viton, Silicon, Nitrile, PTFE
Springs and retainers : SS 304 & SS316

These seals are designed to face higher speed about 6000 rpm. That is possible by small springs(Multi springs) situated at peripherel of the seal, so  it is dinamically balanced. these  seals are available withn balanced design for higher pressure as well as with teflon elastomer for higher temperatre too.  

Features
pressure             : up to 10 bars-- unbalanced seal
                           up to 35 bars-- balanced seals
temperature        : -20 to 250 degree c
rotary face          : Carbon, Sic
stationary face    : carbon Sic Ceramic, Tc
Elastomers         : Viton, Silicon, Nitrile, PTFE
Springs and retainers : SS 304 & SS316