We are offering very strong and ergonomically designed single facer with two profiles paper corrugating machine. This machine is not only time saving but is also easy in operation. Our efficient product comprises following physical aspects:

• Has a main part called Flute Rolls, which is very minutely finished so that perfect impression can be given.
• Fitted with motorized self loading twin shaft reel stand with three unwinding shafts
• These shafts help in easy operation and also saving time.
• Fitted with electric heaters so as to provide lamination of board so that increase in efficiency and production can be achieved.

Size	42"	52"	62"
Motor H.P.	6.5	9	9.5
Heating Load Approx.	27KW	37KW	44KW
Output RF • PM110	110	110	110

Our concern is a prominent name in manufacturing shaftless reel stand. These stands have maximum load capacity of 2000kg. Further, our product consists of following technical aspects:

• Up-down device of paper roll : hydraulic swing arm, 2 rolls (100X450), imported components individual hydraulic system
• Max. Pressure of oil pump : 16Mpa
• Power : 8kw.
• Holding regulating device : hydraulic (4 cylinders)
• Range of regulation : + 50mm, can fie the min. width paper

Width	1.6M.	1.8M.	2M.	2.2M.
Max. Raw Paper	1200 X 1700mm	1200 X 1900mm	1200 X 2100mm	1200 X 2300 mm
Min. Raw Paper	330 X 700mm	330 X 900mm	330 X 1100mm	330 X 1300mm
Cylinders	63 X 600	63 X 600	63 X 700	63 X 700
Maxap ical open width	1750mm	1950mm	2150mm	2350mm

We are trusted name in producing oblique type high speed corrugating which is a paper corrugating Machine. Our machine is provided with Centralized lubrication system. They have the following physical aspects:

• Fitted with flute rolls which are minutely finished and mounted on spherical Roller Bearings so as to give perfect impression on board.
• The setting of flute roll is from one side only
• Also fitted with motor to keep the Gum Rolls Rotation for agitation of the gum while the gum unit is disengaged from the Flute Rolls.
• A steam shower is provided for perfect formation of the flutes
• Additionally provided with motorized self loading reel stand to the machine

Width	1.6M.	1.8M.	2M.	2.2M.
Max. Raw Paper	1200 X 1700mm	1200 X 1900mm	1200 X 2100mm	1200 X 2300 mm
Min. Raw Paper	330 X 700mm	330 X 900mm	330 X 1100mm	330 X 1300mm
Cylinders	63 X 600	63 X 600	63 X 700	63 X 700
Maxap ical open width	1750mm	1950mm	2150mm	2350mm

This auto sheet cutter machine can be operated in alignment of corrugating machine instead of rewinding and making roll of single phaser. It will avoid the labour of 2 to 3 persons to cut on board cutter. The machine is attached with P.I.V Gear unit into the required size. Moreover the machine is provided with variable speed drive to align the corrugation. It can cut the paper into 2 to 3 Nos. at a time from paper reels.

Size	42"	52''	62''
Speed Per Hours	3500	3500	3500
Min..Sheet Leath	16''	16''	16''
Power Requried	2 H.P.	3 H.P.	5 H.P.
Floor Space	95''x61''	90''x61''	90''x70''
Approx Weight	1400kg.	2000kg.	2600kg.

This board cutter is designed so strongly so that they can sustain wear and tear during cutting of cardboard, corrugated board and paper. It has cutting knife which is properly balanced so that free cutting cutting can be achieved by applying minimum pressure. The gauges provided give accurate cutting.

Size

45"

55"

65"

Our sheet pasting machine is used for gluing the fluted side of the board and for pasting board to paper as well as to board for making 3-5-7 ply board. The machine is fully-enclosed and is different than the others. Our machine can be easily is adjusted by rotating handle provided on one side of machine.

Size	65''	75''	85''	95''	105''
Speed.	150rpm	150rpm	150rpm	150rpm	150rpm
Power Requried	O.5 H.p.	O.5 H.p.	1.0 H.p.	1.0 H.p.	1.0 H.p.
Floorspace	80''x30''	90''x30''	100''x30''	110''x30''	120''x30''
Height	50''	50''	50''	50''	50''
Gross Weight	500kg	500kg	500kg	500kg	500kg

We Also Offer Our Clients The Sheet Pressing Machines Which Works With A Supply Of 220 V And Consumes A Power Of 2-3 Horse Power. It Can Work On The Sheets Of Size Upto 105 Inches Width. These Machines Are Used For Pressing Corrugated Sheets. The Glued Sheets Which Are Processed On Pasting Machine Are Piled On Lower Plate And Then Pressure Is Applied For Some Time By Lowering Upper Moving Plate.

Specifications

Size	65''x75''	65''x105''
Pressing Height App.	0-55''	0-60''
Height Of Machine	85''	95''
Floorspace	70''x85''	70''x110''
Weight App.	1600kg'	2400kg'
Power Required	2 H.p.	3 H.p.

Our board papers are used for printing kraft paper and corrugated boards. These are distinct in design and further comprise the following features:

• Instant drying
• Easy to operate
• No complexities while cleaning

Size	30" x 50"	50" x 70"
Production P/H.	1200	1000
H-P	2 H-P	3 H-P

Our combine rotary slotter has been offered by MIMCO for trimming, creasing, slotting and corner cutting of the board. This equipment is very simple in mechanism. This machine is specially used for the corrugated box manufacturing industry. It is provided with self feeding arrangement along with the gauges for accurate feeding and creasing and slotting of the sheets.

We are actively producing four bar rotary cutting and creasing machine which is extremely useful for creasing and cutting. The machine has two pairs of shafts wherein the front pair has cutting dies and rear pair has creasing die. The lower shaft of each pair can be easily raised or lowered by revolving side wheel. Both the guides are provided for easy feeding.

Size	65''	75''	85''	95''	105''
Speed/Minute	300 Ft/Min	300 Ft/Min	300 Ft/Min	300 Ft/Min	300 Ft/Min
Minimum Distance Between Two Dies	3''	3''	3''	3''	3''
Power Requried	1.5 H.p	2 H.p.	2 H.p.	2 H.p.	3 H.p.
Floor Space	85''x52''	98''x52'''	110''x52''	120''x60''	130''x60''
Gross Weight	1700 Kgs	2100 Kgs	2300 Kgs	2500 Kgs	2700 Kgs

Our eccentric slotter helps in slotting and corner cutting is done over this machine. It can slott a number of sheets in one stroke. The distance between two slots and slots depth is adjustable. Two guides are provided for facilitating east feeding and correct dimensions.

Size	65''	75''	85''	95''	105''
Capacity	30''	30''	30''	30''	30''
Min.space Between Slots	5''	7''	7''	8''	8''
Max.space Between Slots	14''	17''	18''	21''	21''
Corner Width	2.75''	3.5''	3.5''	4'''	4'''
Power Required	2 H.p.	3 H.p.	3 H.p.	5 H.p.	5 H.p.
Floor Space	90''x54''	100''x56''	110''x56''	120''x60''	130''x60''
Gross Weight	1600kg	2100kg	2300kg	2500kg	2700kg

Our die punching machine is used to cut, crease and emboss board at a time available in both magnetic and mechanical clutches. This equipment has wide demand all across the global market. Our machine comprises the following technical specifications:

Size	20''x26''	20''x30''	25''x37''	32''x42''	36''x50''
Plates Size	23''x29''	23''x23''	28''x40''	35''x45''	40''x54''
Impression/ Hour	2000	2000	1800	1500	1200
H.P. Required	3 H.P.	3 H.P.	5 H.P.	7.5 H.P.	7.5 H.P.
Floor Space App	60''x45''	60''x51''	65''x55''	78''x78''	85''x80''
Weight	2.7 Mt	3.0 Mt	4.0 Mt	5.5 Mt	6.5 Mt

We are producing the most versatile flat bed die punching machinery which works for all type of corrugated sheet, duplex board and card board, soft and rigid plastic gaskets and rubber materials. The flat bed die is very user-friendly and absolutely defect free. Further, this machine comprises the following features:

• Used for sun pack plastic corrugated sheets.
• Has sharp cuts, sharp edge and perfect crease in one operation.
• Suitable for printed
• Auto manual operation cycle.
• No locking.

Size	35" X 50"	40"X65"	45"X75"	50"X 80"	60"X 90"	70"X 120"	80" X 130"
Power	2 HP	2 HP	2 HP	3 HP	3 HP	5 HP

Our machine semi automatic gluer is highly qualitative in nature and work very efficiently. The equipment is available in sizes from 75'' to 95'' and moderate weight. Further our equipment comprises the following technical features:

Size	75"	85"	95"
Strokes P.M./Maximum	60	60	60
Slot Depth	12"	12"	12"
Maximum sheet feed size	48" x 70"	48" x 80"	48" x90"
Power H.P	3 H.P.	3 H.P.	5 H.P.

We are trusted name in manufacturing angular box stiching machine which are long lasting in service. These have been made from very effective raw material such as casting, steel and many more. Following are its other technical features:

Size	20 (510 mm)	30 (765 mm)	36 (915 mm)	42(1065 mm)	48(1250 mm)
Model	S - 6120	S - 6130	S - 6136	S - 6142	S - 6148

This is another straight box stiching machine which are best in quality and efficient working. This machine is extensively used in various corrugated and paper industries all across the market. Following are its technical specifications:

Size	20 (510 mm)	30 (765 mm)	36 (915 mm)	42(1065 mm)	48(1250 mm)
Model	S - 6120	S - 6130	S - 6136	S - 6142	S - 6148

We also offer our clients the 5 ply combined automatic paper corrugating plant fitted with Two profile corrugation reel Stand’s overhead bridge, glue unit, double baker, Rotary creaser cut off with oil heating arrangement completely provided.

Specifications

Specifications of major parts.	No of Parts
·1 Heavy Duty Bearing Mounted Two Profile Corrugation Machine with 13” Dia flute roll. (Technical specification Enclosed)
·2 Complete arrangement for thermic fluid oil heating with Rotary Joints	2 Nos
·3 Variable speed drive motor of AC Frequency Drive
·4 Gear box 1:5 ratio shall be provided.
·5 2 Nos of pre-heaters shall be fitted on machine.
·6 Shower System ( to confirm perfect pasting )
Imported Paper Hydraulic lifting self loading shaft Less Reel stand ( the Reel Dia can be upto 1500 mm ) will be provided with electric motors and control Panel.	5 Nos
Over-head bridge, take-up unit conveyor belt, web adjustment unit, gangway & stairs.	2 Nos
Jumbo pre-heater with Double Jacket ( Double Jacket maintains less oil consumption)	2 Nos
Glue Unit	1 Nos
Double baker fitted with 20 hot plates tightning unit with weight roll lifting arrangement, pull role stand and conveyor belt.	1 Set
Creaser and Sliter	1 No
sheets cutting (Cut-off) (CNC BASED PROGRAMMATIC)	1 No
Control Pannel	2 Nos

Machine Length : 200 Feet approximately.