Our Product Range
30 products available
- Arduino Uno R3 Atmega 328 Dip Ic Atmega 16U2 Usb Ic
- Mega2560 Pro Atmega2560 16Au Usb Ch340G Small Development Board
- Arduino Pro Micro 5V 16Mhz Mini Leonardo Micro Controller Development Board For Arduino
- Arduino Advanced Kit With Uno R3 Mainboard Development Board And Sensors Kit
- Hc05 Bluetooth Module With Ttl Output
- +25 more products
31 products available
- 3.5 Inch Tft Touch Screen Module For Mega 2560 R3 Due Datasheet
- 8 Channel 5V Low Level Solid State Relay Module
- 1 Channel Power Relay Module With Adjustable Timing Cycle
- 4000W Thyristor Scr Voltage Regulator Temperature Dimmer For Speed Light (Ac 220V)
- Double Bts7960 43A H Bridge High Power Stepper Motor Driver Module
- +26 more products
17 products available
- Black Plastic Storage Box Case Holder For Battery 3 X 18650 Cell Box Without Cover
- 4 X 1.5V Aaa Battery Holder Without Cover
- 12V 8 X Aa Battery Clip Slot Holder Stack Box Case
- Black Plastic Storage Box Case Holder For Battery 4 X Aa Cell Box With Dc Power Plug
- 3.7V To 5V 9V Step Up Adjustable Module 2A 18650 Lithium Battery Charging Booster Module
- +12 more products
Heartbeat LR LDR Count Line Sensor
Providing you the best range of Usb To Rs485 Converter Adapter, Flame Sensor Module Arduino, Infrared Obstacle Avoidance Sensor and IR Wireless Remote Control Arduino with effective & timely delivery.
Interested in this product?
Get Best Quote
Usage/Application | Computer |
Weight | 10 gm |
Body Material | Plastic |
IP Rating | IP56 |
Color | Black |
Packaging Type | Box |
Country of Origin | Made in India |
The USB to RS485 Converter Adapter module help WIN7 XP Vista Linux Mac OS presents an clean to apply RS485 interface by using a Virtual Com Port at the consumer’s system. There aren't any command systems, anything is despatched to the Virtual Comm Port
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Weight | 0.28 oz (8 g) |
Power Source | Electric |
IP Rating | IP55 |
Brand | Rndmfg |
Dimensions | 1.18 in x 0.59 in x 0.20 in (3.0 cm x 1.5 cm x 0.5 cm) |
Detection Distance | 20 cm (4.8V) ~ 100 cm (1V) |
Operating Voltage | 3.3 V-5 V |
Description:
- Flame module Interface module and number 13 comes with LED build a simple circuit to produce flame warning lamp 13 comes with digital interfaces of the LED, the flame sensor connected digital three interfaces, when the flame sensor senses There are key signal detected, LED lights, otherwise off.
- Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive 60 degree detection sensor Two outputs mode: AO: analog output- real-time output voltage signal on the thermal resistance DO: when the temperature reaches a certain threshold- the output high and low signal threshold adjustable via potentiometer
- The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm. It is based on the YG1006 sensor which is a high speed and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation. In fire fighting robot game, the sensor plays a very important role, it can be used as a robot eyes to find the fire source.
Features:
- Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm
- Detection angle about 60 degrees, it is sensitive to the flame spectrum.
- Comparator chip LM393 makes module readings stable.
- Adjustable detection range.
- Digital and Analog Output DO digital switch outputs (0 and 1) AO analog voltage output
- Power indicator and digital switch output indicator
- Grove Interface
- High Photo Sensitivity
- Fast Response Time
- Easy to use
- Sensitivity can adjustable
Application:
- The module is mainly used to detect the infrared light.
- It outputs digital signal 0 and 1 through a Comparator output.
- The output value will be 0 C when infrared light is detected.
- And the sensitivity is adjustable by the precision potentiometer.
Pins:
- VCC Positive voltage input: 5v for analog 3.3v for Digital.
- A0-Analog output
- D0-Digital output
- GND-Ground
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Brand | Rndmfg |
Voltage | 3 V and 5 V |
Power Source | Electric |
Type | Obstacle Avoidance Sensor |
Shape | Rectangle |
IP Rating | IP55 |
Board Size | 3.2 cm x 1.4 cm |
Country of Origin | Made in India |
Description
- Induction to object 0, not induction when output 1, can be directly and 3 v and 5 v SCM IO port connected.
- Induction distance 2 to 40 cm, distance, anti-interference ability. (note: infrared sensor is not detecting all objects can be the same distance away, different colors of objects to light the reflectivity of the color of the object is different, the deeper the more close to black detection distance is short, this sensor 2 to 40 cm is on the white wall measurement out)
- Speed is quick, is suitable for intelligent car obstacle avoidance, black and white line trace, prevent drop, the product counter, line cutting, liquid level detection, etc.
- Use the sensor made of black and white line tracing cars need not in the white paper on the black line running, can be in cement, yellow and complex environment tour line trace. As long as the color of periphery of the black line than black slightly shallow can, eliminate the traditional move, make the environment layout more simple.
- This sensor 3 to 6 v power supply, range ultra wide, suitable for 3 v and 5 v of the single chip microcomputer system.
- Take that can end, EN end is equal to "1" sensor doesn't work, equal to the "0" while you work. Sensors on jumping on cap after EN end long-term ground (EN long-term as "0"). To use EN end when you take off the jump cap.
- Frequency adjust potentiometer is used to adjust infrared transmitting tube carrier frequency, because integration receiving head in a particular 38 KHZ carrier frequency is the most sensitive. Will 502 resistance clockwise transferred to do (that is, the brightness of the tube will be transferred to the maximum), then alignment white wall adjustable 103 resistance, has been transferred to the induction farthest distance is so far, this sensor has been working in the best state.
View Complete Details
Yes, I am interested!
Interested in this product?
Get Best Quote
Wavelength | 940 Nm |
Frequency Crystal Oscillator | 455 KHz |
IR Carrier Frequency | 38 KHz |
Power Source | Battery |
IP Rating | IP55 |
Remote Control Range | Above 8 m |
Packaging Type | Box |
Country of Origin | Made in India |
IR is widely used in remoter control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder. Well, it will be also easy to make your own IR controller using IR transmitter. The IR Remote Receiver Electronic Brick has 3 pins. From left to right they are: (G) Ground, (V) Voltage, (S) Signal. BUT the marking sometimes vary on the little circuit board. In this photo they are marked G-R-Y. The 3-pin cable in the photo has the typical color code: (G) Ground = Black, (V) Voltage = Red, (S) Signal = White. This brick also comes with the IR Infrared Robot Remote Control Kit which has a remote with arrow buttons for direction etc. (Scroll down for example). It is also in the YourDuino Electronic Brick Set. There are many different IR remote controls. Some from YourDuino.com are the low-cost IR Infrared Remote Control Kit 2 and also the IR Remote included as part of the MAKER Version Electronic Brick Starter Set Then, there are the typical TV and Stereo Remotes. All of these may have different encoding methods and number of physical buttons, and different codes received when a button is pressed. Below we will give example Software Sketches for a few common IR Remotes.
Features:
- Based on NEC protocol Built-in 1 x AG10 battery
View Complete Details
Yes, I am interested!
All Rights Reserved (Terms of Use)
- Developed and Managed by IndiaMART InterMESH Limited