Features

• Suitable, if there is space limitation, as the ramp are not required in either side
• Flush to ground level
• Designed for heavy usage and harsh environment
• Easy movement of vehicles on platform
• Capacity range from 05 MT to 120 MT
• Available in compression, double ended shear- beam, rocker column, single ended beam load cell & weighing module(Assembly)

Features

• Low civil cost with lesser excavation is required
• Available in module form for easy transportation and installation
• Surface mounted
• The load cells and the top of deck plate are above the ground level, facilitating easy maintenance
• No high water table or drainage related problem
• Capacity range from 05 MT to 120 MT
• Available in compression, double ended shear- beam, rocker column, single ended beam load cell & weighing module(Assembly)

Features

• Low civil cost with lesser excavation is required
• Suitable if Down side ground level in comparison with Road level
• Very rugged and tough in structure
• Available in module form for easy transportation and installation
• Surface mounted
• The load cells and the top of deck plate are above the ground level, facilitating easy maintenance
• Capacity range from 05 MT to 120 MT.
• Available in compression, double ended shear- beam, rocker column, single ended beam load cell & weighing module(Assembly)

Features

• Suitable, if there is space limitation and hard rock area where PIT excavation not possible more than three feet
• Flush to ground level
• Designed for heavy usage and harsh environment
• Easy movement of Vehicles on platform
• Capacity range from 05 MT to 120 MT.
• Available in compression, double ended shear- beam, rocker column, single ended beam load cell & weighing module(Assembly)

(A) CONVERSION OF MECHANICAL WEIGH BRIDGE IN TO ELECTRO MECHANICAL WEIGH-BRIDGE
(by one s-type Load cell): With the addition of a single s-type Load cell to a mechanical weigh bridge lever systems many advantages of electronic weighing can be transferred to existing installation at a very nominal cost. A single Load cell is inserted on transfer lever of bottom work of the weigh bridge.

(B) CONVERSION OF MECHANICAL WEIGH BRIDGE IN TO FULLY ELECTRONIC WEIGH BRIDGE
(by four & six Load cell): Any electronic control unit can be added to the weigh bridge in some cases the lever system can be replaced by cross joint with & Load cell weighing module which support the platform. Thus the weigh bridge can be made fully Electronic weigh bridge with minor modification in the foundation. With modification the capacity of the weigh bridge can also be increased in some cases.

(A) SIMPLE WEIGHT INDICATOR:

• Micro Processor based
• Power supply SMPS with EMI/RFI filter and Spike Suppressor
• Auto Zero tracking
• Bright red 6-digit,7 segment LED weight display
• 02 Nos,Rs-232 C ports for P.C. link up.
• Extra port for Remote display.

(B) ALPHA-NUMERIC WEIGHT INDICATOR:

• Micro Processor based
• Full digital calibration
• Auto zero tracking
• 2*16 char LED for operator interface
• 02 Nos Rs-232 C output for P.C. link up
• IBM - compatible 101 key board
• Customized Ticket printout
• Field programmable features
• 1500 weighment memory record
• Consolidated reports availability
• Power supply SMPS type with EMI/RFI filter and spike suppressor.

Features

• Micro processor based highly versatile system.
• Available in range from 5 kg to 100 tones
• Load cells specially designed to suit extreme environmental conditions.
• Flame-proof CMRS approved or weather-proof systems.
• Easy to install and calibrate
• Insures accurate control and enhances production.
• Can be used for level measurement and control, or loose/gain in weight measurement and control along with flow rate calculation

A batching / mixing happer is mounted on 3 or 4 load cells the weight hopper has inputs for multiple material. the batching controller controls the sequence of operation of all input and discharge valves as per a fixed sequence as well as ratio of the material. multiple component sequence and ratio can be feed in the controller memory for recall with signal switch operation.

Sensotech introduce state of art easy to install hook type crane weigher for instant reaching when load is fitted by crane. It is designed to take any Industrial abuse prevailing in industries like paper mill, rolling mill, foundries, steel industry etc. in unique mobility made it more versatile choice to meet weighing needs.

Features

• Sensotech milk weigher incorporates post display type design and provides accurate weight in big clear red digits that is easy to read. Model is versatile and can be easily fixed where you want it, to best suit your working environment.
• When required this system can be easily interfaced to a computer.
• Milk weigher is fully water-proof to facilitate easy cleaning. The machine is also fully protected from moisture and humidity which is not a threat to its consistent accurate performance.
• Stainless steel boule for milk.

(A) COMPRESSION LOAD CELL ASSEMBLY: Our suspension design incorporates a unique self aligning three ball assembly. These assembly protects the load cell against horizontal forces which are generated when the vehicle loads on the platform.

(B) SHEAR BEAM LOAD CELL ASSEMBLY: The suspension design allows the platform to swing. It absorbing the lateral and transverse loads which are generated by a moving vehicle on the platform. This generates better accuracy and reliability in weighment and also protects the load cell from the mechanical damages.

(C) ROCKER COLUMN LOAD CELL ASSEMBLY: Load cell of stainless steel construction and complete hermetic sealing, making them suitable for use in the toughest industrial environments. The load cell design, in combination with a low cost self aligning rocker assembly, unites excellent load introduction with a low profile outline.

(D) SINGLE ENDED BEAMS LOAD CELL ASSEMBLY: The module is available in mild steel. Loading of the cell is through a rod and spherical washer assembly that protects the cell from side load induced errors caused by load structure expansion. It is self-checking and low profile module suitable for medium (05mt to 20mt) capacity applications.

Features

• Micro processor based highly versatile system.
• Available in range from 5 kg to 100 tones
• Accuracy of 0.1% and or better for filling drum/bag/tin/jar.
• Flame proof or weather proof enclosures
• Safety interlocks
• Variety of standard features designed to speed up your filling operation with easy and accurate and also permits economical upgrading.