We have emerged as a prominent manufacturer and exporter of Servo deep freezers, which are encountering rich demand in the markets. These deep freezers are constructed out of best quality metal in double wall configuration. Being a quality oriented organization, these freezers undergo stringent testing to ensure their flawless finish. We also welcome customized orders to satisfactorily meet clients' demands.

Servo Deep Freezer: (Up to -40°C):

• Servo make deep freezer constructed by double walled chamber with the inner wall made of stainless steel & outer mean by mild steel along with suitable reinforcement finished by plastic paint.
• PUF insulation material is filled between the inner and outer wall.
• The refrigeration cooling coil is fixed in the inner chamber.
• A hermetically sealed compressor used for below ambient temperature.
• Digital temperature controller used to maintained up to -40°C with ±0.5°C Accuracy.

Specifications:

S.NO	Inner size mm (W X H X D)	Watts
1. 2.	450X450X450 600 X600 X 600	1KW 1.5KW

We are a trusted name involved in manufacturing, supply and export of Servo bacteriological incubators. Precision engineered in accurate dimensions, these incubators are provided with thermal resistant insulation in all sides. We fabricate them using finest grade of materials, procured from the reliable sources. Available in double walled construction, these incubators are resistant to corrosion and work for a long period of time.

Servo Bacteriological Incubator:

• Servo bacteriological incubator is a double walled chamber.
  
• Inner Made up of SS & Outer wall by Mild steel with powder coating.
  
• The heat insulation PUF is provided between the inner and outer wall.
  
• Working temp. ambient to 50°C ±0.5°C is controlled by PID imported Controller.
  
• Air circulation fan interlock with low wattage heater

Specifications:

S.NO	Inner size mm W X D X H	Wattage/230vAC	No.of Shelves
1	350X350X350mm	250	2
2	450X450X450mm	250	2
3	450X450X600mm	500	2
4	450X600X900mm	750	3
5	600X600X600mm	850	3
6	600X600X900mm	950	3

Servo B.O.D Incubator:

• Servo BOD incubator is constructed by double walled chamber.
• The inner chamber is made up of SS sheet and the outer chamber made up of mild steel finished by powder coating.
• 75mm thick PUF thermal resistant insulation is provided in all sides.
• A hermetically sealed compressor used for below ambient temperature.
• Working temperature ranges from 5°C to 50°C .
• The air circulation fan, digital temperature controller are all used to maintain the accuracy of ±0.5°C at above range.

Specifications:

S.NO	Inner size mm W X D X H	Watts
1	410x455 x610 (4Cft)	1000W
2	415x505X830 (6Cft)	1500W
3	550x570x875 (10Cft)	2000W
4	580x650x900 (12Cft)	2500W

With the aim to cater to the needs of laboratories, we manufacture best quality autoclaves, that are available in horizontal, rectangular & round sizes. These laboratory autoclaves are fabricated by us using hi-tech machines under the supervision of expert professionals. Robust construction, easy operation and high performance are the highlighting features of these autoclaves. We also offer them as per the specifications laid down by our clients.

Servo Autoclaves (Vertical):

• This is double walled in construction.
• Inner made up of SS & the outer made of thick mild steel sheet or SS
• The dish formed lid is made up of thick stainless steel plate.
• The working steam pressure is of 20 lbs/psi.
• An adjustable safety valve, pressure gauge, steam release cocks, are also provided.
• Suitable for operation on 220/230 volts AC.

Specifications:

S.No	Dimensions        (Dia X Depth)	Wattage
1	350 X 550mm	3KW
2	400 X 550mm	4KW
3	450 X 600mm	4KW
4	550 X 750mm	6KW

Servo Autoclaves (Horizontal / Rectangular / Round):

S.No	Rectangular  (B x D x H ) in mm	Round   (D X H) in mm	Boiler Size  (DxDepth) in mm	Wattage
1	400 x 400 x 600	400 x600	250 x450	6KW
2	450 x 450 x 800	450 x800	300 x 500	9KW
3	600 x 600 x 1200	600 x1200	350 x 600	12KW
4	900 x 900 x 1500	900 x 1500	400 x 800	24KW

Complying with international quality standards, these laminar flow equipment have gained huge appreciation from our clients. For manufacturing these equipment, we optimize high grade teak & marine plywood. We also use laminated melamine finish & anti fungal epoxy coating, which provide in them long working life. These equipment are dimensionally precise & functionally superior and offered by us at industry leading prices.

Servo Laminar Flow Equipment : Vertical/Horizontal Laminar Flow

• This is made up of teak/marine plywood construction with laminated melamine finish on the external surface & anti fungal epoxy coated on the inside.
• The work table is made up of partially perforated Stainless steel sheet.
• An air blower is sucking the atmosphere air throw the primary filter and passed on the 0.3 microns HEPA filter 99.99% efficiency.
• Other accessories are Illumination light, UV Lamp & incline Mono meter & gas cock also provided.
• Door made up of 6mm thick clear acrylic hinged on the top side, this is folded type (or) operated by counter weight.
• Noise level Less than 65dB on A scale, vibration level 2.5 Microns, Illumination level100Watts/Sq.mtr., Static & dynamically balanced impeller used in it.
• Air flow designed as per the standards (0.45m/sec. to 0.65m/sec.)
• The above Instrument is constructed by As per the Standard BS 5726 appendix A, US NIH Guidelines for class II containment systems.
  

Specifications:

S.No	Horizontal Size	Vertical Size
1	2'X2'X2'	2'X2'X2'
2	4'X2'X2'	4'X2'X2'
3	3'X2'X2'	3'X2'X2'
4	6'X2'X2'	6'X2'X2'

Supported by sophisticated infrastructure and engineering expertise, we manufacture premium quality
environmental test chambers. Sturdily constructed, these chambers are provided with thick PUF insulated doors. In order to meet the requirements of different clients, we offer them in a variety of sizes, capacities and shelve options. We hold expertise to custom design them in accordance with specifications and demands of our clients.

Servo Environmental Test Chamber:

• This is constructed by double walled chamber with the inner made up of stainless steel & the outer means
• Mild steel finished by powder coating.
• 50 mm thick PUF insulated is provided in all size including the door. The door contains view glass, gasket, wiper etc.,
• A hermetically sealed compressor used for below ambient temperature.
• This portion of the chamber also houses the boiler with an immersion heater fixed with a water level controller for creating humidity.
• The temperature ranges from -40°C to 150°C controlled by micro processor based programmable controller ±0.5°C accuracy.
• Relative humidity ranges from 60% to 95% with 2% accuracy.
• All controls are housed in the panel on the top of the chamber. Operates on 220 / 230v, AC supply.

Specifications:

S.NO	Inner size mm W X H X D	Watts	No.of Shelves
1. 2. 3.	450X450X450 600 X600 X 600 900x900x900	2.5KW 4.5KW 6KW	2 3 3

Optimizing the innovative manufacturing techniques, we offer best quality salt spray chambers. Fabricated from rust resistant materials, these chambers are available in various models to choose from. Compact in size yet durable in quality, these chambers offer long time functionality. Implementation of rigorous quality testing program ensures their impeccable quality. Our proficiency lies in offering them in accordance with clients' specific requirements.

Our servo make salt spray chamber is constructed by non corroded material of acrylic sheet/stainless steel 316L with PP coating.

Features:

• The chamber is double walled, closed by top lid.It is especially provided to condense the fog water which does not allow to fall on the specimen. 
• The specimen is held on placed at the center of the chamber.
• It should be maintained at an angle of 45°  slanting to the chamber.
• The top lid is held on the chamber with water seal for controlling the fog leakage.
• Other accessories are control panel, specimen holder atomizer & reservoir.
• The chamber's temperature is controlled digital temperature controller to maintain 35° C and 95 to 100% relative humidity with atmospheric pressure.
• 5% of Nacl2 solution is charged in reservoir. 
• Air 15 to 25lps. Enters to the atomizer to produce the fog mist.
• The condensation is 1 to 2ml/h of 80sq mm area for an average working hours.
• Saturation Tower is used for preheating the air. The air is passed through 40° c of hot water.
• Control panel provided at the side wall of the main chamber. 
• It contains digital timer with battery back up, chamber temp. controller, saturation tower controller, water level controller and solution level indicator, RH indicator, on/off switch, safety fuse, pilot lamps and measuring cylinder etc.
• Washing Machine for Industries.
• More intrested in R&D works in Industries.

Specifications:

S.No	Dimensions (mm)
1 2 3 4	600 X 600 X 600 mm 750 X 500 X 400 mm 900 X 600 X 600 mm 1500 X1200 X1000 mm

Capacity	120 litres	450 litres	1000 litres	2000 litres
Model	Bench (in MM) (LXWXD)	Mobility by caster wheel (in MM) (LXWXD)	Mobility by caster wheel (in MM) (LXWXD)	Mobility by caster wheel (in MM) (LXWXD)
Outer Size	1200 X 680 X 770	1760 X 940 X 1580	2400 X 1200 X 1580	3000 X1400 X 1840
Inner Size	770 X 500 X 500	1040 X 770 X 1050	1400 X 940 X 1310	2210 X 980 X 1310
Solution Tank	25 lit.	50 lit.	50 lit.	100 lit.

Emphasizing on quality as well as innovation, we manufacture international quality standard hot air ovens. Our range of hot air ovens is provided with air circulation fan to maintain the uniform temperature in all sides. Further, they are provided with doors insulated with thick epoxy. Driven by the customer focused approach, we offer these hot air ovens in a variety of sizes and finishes to suit clients' demands perfectly.

Servo Hot Air Oven (Laboratory/Memmert type) :

• This is triple walled chamber with the inner made up of stainless steel & outer & intermediate wall made up of mild steel finished with powder coating.
• 75 mm thick epoxy bonded thermal Insulation is provided in all side including door.
• Electrical heater is fixed on the intermediate wall which is controlled by PID Digital temperature controller, this is operated up to 300°C Accuracy ±0.5°C.
• Air circulation fan is used to maintained the uniform temperature in all sides.
• And the other accessories are control panel, Stainless Steel adjustable shelves etc.,

Specifications:

S.No	Inner size mm	Watts
1. 2. 3. 4.	350X350X350 450X450X450 600X600X600 900X900X900	2KW 2KW 3KW 4.5KW

Backed by cutting edge process technology, these vacuum ovens are widely preferred in the domestic as well as overseas markets. These ovens are available with double walled chambers constructed out of quality approved metals. They are further insulated with special grade glass wool to reduce the radiation heat loss to the minimum. Judicial mix of men and machinery allows us to offer these vacuum ovens according to the demands of our esteemed clients.

Specifications:

S.No	Inner chamber Size (Dia X depth mm)	Watts
1. 2. 3.	280X375 450X450 500X 500	1000 1500 1500

Leveraging upon years of abundant experience, we manufacture and export super grade platform shakers. We fabricate our range using best quality mild steel and stringently test their quality on each stage of production. The finish of powder coating further enhances their durability to a large extent. Precise dimension, resistance to corrosion, easy maintenance & trouble free working are the salient features of our range, which make them most sought after amongst our clients.

Servo Platform Shaker:

• This is fully made up of mild steel body finished by powder coating.
• PMDC motor used to drive the platform 25mm eccentrically.
• The speed is controlled by PMDC drive up to 250rpm
• The platform contains lotus clamp for holding the various capacity flask.

Specifications:

S.No	Horizontal Size	Vertical Size
1. 2. 3.	300 x300x 200mm 400 x400x200mm 600 x600 x300mm	250mlx12Nos/100mlX16Nos. 250ml x 25 Nos/500ml x12Nos. 100ml,250ml,500ml,1Lit,2lit x36,24,16& 12Nos.

We are pleased to introduce ourselves as a highly reputed manufacturer and exporter of best quality servo fermentor. The materials used in fabrication of these fermentors are of superior quality and ensure their impeccable quality. They are offered by us in different capacities to fulfill the demands of different organizations. We also provide the facility of customization and fabricate these fermentors as per the exact requirements of clients.

Servo Fermentor:

• This is a double walled cylindrical stainless steel tank, both end formed as a spherical dish. One end welded and other end removal type.
• The inner chamber contains anchor type stirrer, baffles, aeration pipe line, thermo well, charge hole, line PH & temperature indicator etc.
• The outer jacket provided for heating and cooling the products.
• The discharge line provided at the bottom.
• An electrical motor coupled with reduction gear box up to 200rpm.
• Other accessories are sight & light glass, Mechanical seal etc.,
• Capacity 100 Lit,250 Lit, 500 Lit, 1000 Lit along with steam boiler, dehumidifier are to be made.

Specifications:

S.NO	Description
1.	Charge Hole
2.	Cooling Inlet
3.	Steam Outlet
4.	1/2 "Steam Inlet
5.	Cooling Outlet
6.	Valve
7.	Discharge Hole
8.	Sample Outlet
9.	Thermo well Packet
10.	Air Inlet
11.	Thermo well
12.	Light & Visor Glass
13.	Gland

We offer an advanced range of lab furnaces, that find usages for general heating and melting applications. Fabricated from heavy gauge steel, these furnaces are designed to provide uniform heating throughout the chamber. Our range of lab furnace provides optimum control over temperature with an adjustable setting. We can also offer these lab furnaces in different specifications based on the requirements of the clients.

We offer an advanced range of lab furnaces that are used for general heating and melting application. Fabricated fro heavy gauge steel, these furnaces are designed to provide uniform heating throughout the chamber.

Our range lab furnace provided optimum control over temprature with an adjustable setting. We can offer lab furnaces in different specifications based on the requirements of the client.

Avail from us Servo constant temperature baths, which are provided with double wall construction, all side insulation and stirrer for maintaining uniform temperature. They are robustly designed to serve the application demands of different industries for long duration. While manufacturing them, we keep into consideration the international quality standards. We also offer these temperature baths as per the specifications directed by clients.

Servo Constant Temperature Bath:

• Servo bath is constructed by double walled with inner chamber fabricated by SS sheet & Outer by means of Mild Steel with powder coating.
• 50 mm thick thermal insulation is provided in all sides.
• Heater is fixed in the inner bath, which is controlled by PID digital temperature controller, (Temp. of 100°C, Accuracy ±0.5°C). 
• The bath contains water inlet/outlet pipe lines and drain out. Stirrer for maintain the uniform temperature aeration pump etc.

 
Specifications:

S.NO	Inner size mm W X D X H	Watts
1. 2.	250 x 250 x 250 300 x 300 x 300	1000 1500