Servo Technologies System
Servo Technologies System
Ghaziabad, Uttar Pradesh
Home  » Product Range » 

Servo Voltage Stabilizer


We manufacture world class Servo Voltage Stabilizer and automatic voltage stabilizers in Air/Oil Cooled Constructions for both LT & HT Lines from 20 KVA to 5000 KVA. These servo voltage stabilizer has been designed according to the International Standards. Our servo stabilizers are very effective for power and voltage control. Apart from this we also provide after sales service support for these products.


Oil Cooled Three Phase Stabilizers
Oil Cooled Three Phase Stabilizers

We offer you Oil Cooled Three Phase Servo Voltage Stabilizers. These stabilizers are used in several industrial, offices and domestic applications. Our three phase oil cooled servo voltage stabilizers are designed for precise control of output voltage that significantly increases the life of appliances and machine contacted through it. It also reduces breakdown and the cost maintenance.

Technical Specification :

Standard Confirming to latest IS:9815 and ISO 9001-2008 Standard.
Rating 01 KVA-300 KVA single phase.
03 KVA -3000 KVA three phase.
Input Voltage Single phase (90 v-270 v, 140 v-280 v, 160 v-260 v )
Three phase (150 v-460 v, 250 v-460 v, 270 v-460 v )
Output Voltage Single phase (220 v/230 v/240 v +/- 1% ).
Three phase ( 380 v/400 v/415 v +/- 2% ).
Wave Form Distortion Nill
Response Time 10 m. Sec
Correction Method Stepless correction using variac
Control Circuit Fully automatic ic based solid state, glass epoxy control card for easy on line serviceability
Input Frequency 45-55 Hz
Cooling Natural air / oil
Efficiency Better than 98 %
Duty Cycle 100. 00 %
Operation Auto / Manual
No Load Loss Less than 1 %
Suitability Suitable for 3 phase unbalanced/balanced supply, unbalanced/balanced loads
Operating Temperature -15 °c to 50 °c
Additional Facility Step down/isolations
Compatibility to Specially designed control card for faithful
DG Set Operation on mains as well as DG set.
Control Panel Power on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage.
Transformers & Variac Wound with electrolyte grade copper of 99.9% purity. Low loss CRGO lamination is used to increased over all efficiency. This reduces energy losses and hences saves electricity
Earthing provided through two bolts 7 nuts
High Voltage With stands 2. 5 kv for power transformer
Insulator better than 5 m ohms because of wound
Resistance Components being baked in the oven at 110 °c after vacuum impregnation



Send Enquiry


Oil Cooled Single Phase
Oil Cooled Single Phase
We offer you Oil Cooled Single Phase Servo Voltage Stabilizers. These stabilizers are used in several industrial, offices and domestic applications. Our three phase oil cooled servo voltage stabilizers are designed for precise control of output voltage that significantly increases the life of appliances and machine contacted through it. It also reduces breakdown and the cost maintenance.

Technical specification :

Standard Confirming to latest IS:9815 and ISO 9001-2008 Standard.
Rating 01 kva -300 kva single phase. 03 kva -3000 kva three phase.
Input Voltage Single phase (90 v-270 v , 140 v-280 v , 160 v-260 v ), Three phase (150 v-460 v , 250 v-460 v , 270 v-460 v )
Output Voltage Single phase (220v/230v/240v +/- 1% ). Three phase ( 380v/400v/415v +/- 2% ).
Wave Form Distortion Nill
Response Time 10 m. Sec
Correction Method Stepless correction using variac
Control Circuit Fully automatic ic based solid state, glass epoxy control card for easy on line serviceability
Input Frequency 45-55 hz
Cooling Natural air /oil
Efficiency Better than 98%
Duty cycle 100%
Operation Auto / Manual
No Load Loss Less than 1%
Suitability Suitable for 3 phase unbalanced/balanced supply, unbalanced/balanced loads
Operating Temperature -15 °c to 50 °c
Additional Facility Step down/isolations
Compatibility to Specially designed control card for faithful
DG Set Operation on mains as well as dg set.
Control Panel Power on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/ output voltage with in 5% of the set output voltage,volt meter to indicator output/ input voltage.
Transformers & Variac Wound with electrolyte grade copper of 99. 9% purity . Low loss crgo lamination is used to increased over all efficiency. This reduces energy losses and hences saves electricity
Earthing Provided through two bolts 7 nuts
High Voltage With stands 2.5 kv for power transformer
Insulator Better than 5 m ohms because of wound
Resistance Components being baked in the oven at 110 °C after vacuum impregnation



Send Enquiry


Air Cooled Three Phase
Air Cooled Three Phase
We manufacture and supply Servo Air Cooled Three Phase Voltage Stabilizer which are highly functional and work effectively. Our servo voltage stabilizers match with international standards. Their controlled flow of voltage protects domestic and commercial electrical & electronic system from power fluctuation.

Technical Specification :

Standard Confirming to latest IS:9815 and ISO 9001-2008 Standard.
Rating single phase 01 KVA -300 KVA .
three phase 03 KVA -3000 KVA .
Input Voltage Single phase (90 v-270 v , 140 v-280 v , 160 v-260 v )
Three phase (150 v-460 v , 250 v-460 v , 270 v-460 v )
Output Voltage Single phase (220 v/230 v/240 v +/- 1% ).
Three phase ( 380 v/400 v/415 v +/- 2% ).
Wave Form Distortion Nill
Response Time 10 m. Sec
Correction Method Stepless correction using variac
Control Circuit Fully automatic ic based solid state, glass epoxy control card for easy on line serviceability
Input Frequency 45-55 Hz
Cooling Natural air /oil
Efficiency Better than 98%
Duty Cycle 100. 00%
Operation Auto / Manual
No Load Loss Less than 1%
Suitability Suitable for 3 phase unbalanced/balanced supply,unbalanced/balanced loads
Operating Temperature -15 °c to 50 °c
Additional Facility Step down/isolations
Compatibility to Specially designed control card for faithful
DG Set Operation on mains as well as dg set.
Control Panel Power on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/ output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage.
Transformers & Variac Wound with electrolyte grade copper of 99. 9% purity. Low loss CRGO lamination is used to increased over all efficiency. This reduces energy losses and hences saves electricity
Earthing Provided through two bolts 7 nuts
High Voltage With stands 2.5 kv for power transformer
Insulator Better than 5 m ohms because of wound
Resistance Components being baked in the oven at 110 °c after vacuum impregnation



Send Enquiry


Air Cooled Single Phase
Air Cooled Single Phase

We manufacture and supply Servo Air Cooled Single Phase Voltage Stabilizer which are highly functional and work effectively. Our servo voltage stabilizers match with international standards. Their controlled flow of voltage protects domestic and commercial electrical & electronic system from power fluctuation.


Technical Specification :

Standard Confirming to latest IS:9815 and ISO 9001-2008 Standard.
Rating 01 KVA -300 KVA Single phase.
03 KVA -3000 Kva Three Phase.
Input Voltage Single phase (90 V-270 V , 140 V-280 V , 160 V-260 V ) Three phase (150 V-460 V , 250 V-460 V , 270 V-460 V )
Output Voltage Single phase (220 V/230 V/240 V +/- 1% ). Three phase ( 380 V/400 V/415 V +/- 2% ).
Wave Form Distortion Nill
Response Time 10 m.sec
Correction Method Stepless correction using Variac
Control Circuit Fully automatic IC based solid state, glass epoxy control card for easy on line serviceability
Input Frequency 45-55 Hz
Cooling Natural air /oil
Efficiency Better than 98%
Duty Cycle 100 %
Operation Auto / Manual
No Load Loss Less than 1%
Suitability Suitable for 3 phase unbalanced/balanced supply, unbalanced/balanced load
Operating Temperature -15 °c TO 50 °c
Additional Facility Step down / isolations
Compatibility to Specially designed control card for faithful
DG Set Operation on mains as well as DG set.
Control Panel Power on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage.
Transformers & Variac Are wound with electrolyte Grade Copper of 99.9 % purity. Low loss CRGO lamination is used to Increased over all efficiency. This reduces energy losses and hence saves electricity
Earthing Provided through two bolts 7 nuts
High Voltage With stands 2.5 KV for power transformer
Insulator Better than 5 m ohms because of wound
Resistance Components being baked in the oven at 110 °c after vacuum impregnation



Send Enquiry


Single Phase / Three Phase Servo Voltage Stabilizer
Single Phase / Three Phase Servo Voltage Stabilizer



Send Enquiry




Contact Us:
 

 

Servo Technologies System
Mr. Mohd. Eshitiyaq  (Manager)
A - 34, Shalimar Garden, Main Rajendra Nagar Industrial Area, Shahibabad
Ghaziabad - 201 005, Uttar Pradesh, India