|
 |
Power Backup Systems
|
We are engaged in the manufacture and export of various electrical products such as power backup equipment, stabilizers, battery and others. Our entire assortment is reckoned and recognized in the electronic fields of the industry. The entire fabrication process is undertaken in accordance to the recommended norms of the industry and therefore is appropriate for varied applications. Along with the standardized range, we also offer customization facility which makes us counted among leading business entity.
Following are some of the varieties in our diversified assortment:
|
 |  |  |  |  | Servo Stabilizer Leveraging
on our in-house facilities, we are enabled to offer specialized
servo stabilizers under the brand names of proven series servo stabilizer and caliber series static voltage regulator. These servo stabilizers are manufactured as per the recommended standards
in the industry. Every brand is designed and developed with
specialized features. We
have discussed the specialties of these brands as follows: Proven Series Servo Stabilizer Our
Proven Series is a controlled servo stabilizer which is based on
Programmed logic circuit (PLC) technology. They offer stabilized
output under severe conditions during voltage and current
fluctuations due to its unique conditions single phase or three
phases, distortion less solid state motorizes voltage controller
conserves variable energy. We can customize them as per the
requirements of our clients. Following
are the features of our Proven Series Servo Stabilizer:
- No
effect by any transient over voltage surge with fast correction
speed (20V- 40V per second)
- Testing
is computerized thereby ensuring higher reliability
- Higher
Power at lower cost: rating of 1KVA-400KVA
- Output
voltage adjustable (110V output can also be provided)
- No
effect on load power factor & overall efficiency above 95%.
- Increased
life of your equipment reduced heating and minimal losses
- Optional
features include surge suppression, Hi/Low voltage cut off, overload
protection, single-phase prevention and bypass mechanism
Caliber
Series Static Voltage Regulator Leveraging
on our advances in Power Electronics, Static Voltage Regular (SVR)
has surfaced as a leading technology to provide ride through support
for crucial facilities in the event of transient under voltage / over
voltage conditions. The SVR through the use of its static tap\changer
regulates the voltage to its present level i.e. 220 volts+-5%. These
are different from conventional load tap changers, which are equipped
to respond immediately by selecting the suitable tap on a sub cycle
basic, without the requirement to progress through a series of lower
voltage tap. Cited
below are some of the attributes of our Caliber
Series Static Voltage Regulator:
- The
simplicity of this design results in the high efficiency &
robustness of the SVR
- With
strategic combination of advanced power electronic and
microprocessor; high performance and high correction speed of the
SVR are guaranteed
- Additional
Isolation Transformer & RFI/EMI filters constitute a high level
spike suppression system which further protect your equipment by
virtually eliminating any transients in the distribution network
|  |  |
 |  |  |  |  |
 | PFC Module Power
Factor Controller , PFC modules of electrical loads is one of the foremost problems
faced by almost the entire industrial sector. Most of the loads draw
a certain quantity of active power together with reactive power from
the mains. The Active power (kW) executes the work while the reactive
power (KVAr) could be construed as an undesirable load on the supply.
The increased flow of reactive power has following disadvantages,
Overloading of power Source i.e. transformer or alternator and higher
voltage drops right through the system which is prevented by our
PFC Modules. Cited
below are some of the salient features of our PFC modules are:
- Automation
self-adjustment to any capacitor step value
- Allows
manual switching of each capacitor steps
- Digital
indication of power factor preset parameters and specified
installation data
- No-
volt release feature to immediately disconnect all capacitor in the
even of power failure for more than 35msecs
- Digital
setting of individual parameters including target power factor
Switching time, step limit and others
- Elimination
of defective capacitors and their indication
- Digital
reading facility of switching cycles per capacitor steps
- Digital
encoded reading of capacitor sizes
- Visual
display of harmonic overload alarm
- Visual
display of target cos F alarm
- Stage
indication of steps switched in, as well as total banks in operation
- Easy
plug-in back panel terminal connection
- Protection
against capacitor over-current, due to over-voltage, short-circuit,
system resonance and presence of higher value of harmonics in the
system.
- Digital
display of voltages, Currents, kW, kV Ar, KWh, and Frequency
|  |
 |  |  |  |  | High Frequency Online UPS Our
wide assortment of High Frequency Online UPS includes 1-In, 1-Out Online UPS which are
offered in the market under the brand name of Alpha
Beta Gama Series Online UPS. The
introduction of our 1-In, 1-Out Online UPS is the solution for power
problems such as sags, surges, voltage and frequency variation,
brownouts, spikes, blackouts and others. These High Frequency Online UPS are equipped with this
Latest technology and hence their performance remains reliable and
unmatched. Digital Signal Processor (DSP) Technology most advanced
and one of the most powerful technologies which is used in our1-In,
1-Out Online UPS resulting in high speed processing applications.
Since it provides 100% Pure Sine Wave output, it ensures complete
safety of highly sophisticated equipment. Our Servotech On-Line UPS
System is equipped with an advanced battery monitoring system, which
tests, charges, discharges and manages the batteries. The batteries
are protected against overcharge and deep discharge which prolongs
battery life and optimizes its performance. Following
are some of the salient features of High Frequency Online UPS are:
- DSP
based Double conversion VFI technology
- High
Frequency PWM Design Using IGBT/MOSFET
- Instantaneous
sine wave reference technique for superior performance
- Ensures
full charging and protection of the batteries, and enhanced battery
life
- Wider
Input Voltage and Frequency Window
- Input
voltage tolerance range suitable for all types and capacities of
batteries
- Fast
correction rate for line and load regulation
- High
inrush/peak current handling capacity
- Upgradeable
On-Site
|  |  |
|