Sesami Solutions

SL-5TW is an Outdoor High Power Multi-Mode Wireless Bridge solution specially designed for WISP applications in any harsh environments. It is not just an N-in-1 box, but employs up to 24dbm (250mw) 802.11g RF output power which enables WISP operators to reach more customers in broader area. For today’s competitive WISP market, SL5TW is an ideal solution encompassing the flexible deployment, high security, lower TCO, and ease-of-use advantages. Adjustable RF Output Power (500mW – 802.11b/g) High RF Output Power for Long Range Radio Link User friendly Web GUI for Device Configuration VOIP – Friendly Qos Mechanism – Bandwidth Management, IP ToS

Sesami SL-25GTW is a Dual-RF output and Dual-RF module wireless MESH network product. Working at 2.4GHz and 5.8GHz simultaneous. SL-25GTW is high power wireless MESH network equipment. The wireless node can self-configure, dispose the network, and the network failure can be repaired automatically so that the overall performance and the usability achieves the optimization. This equipment makes use of advance algorithm to enhance the throughput and low time-out from the centre to the edge of the network. This equipment is not only the wireless MESH junction point, but also may simultaneously support the wireless hotspot covering. It will provide the wireless broadcast access and the high bandwidth audio frequency /data/video frequency service for the municipal administration, the public security department and the inhabitant, and won't be affected by the position and mobilization of the users completely.

High Power Wireless Outdoor Bridge / Router Complies with IEEE 802.11b/g standard for 2.4GHz Wireless LAN. Support bridging, routing, WISP functions between wireless and wired Ethernet interfaces. It's the best way to add wireless capability to your existing wired network, or to add bandwidth to your wireless installation. To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also supports WPA. The MAC address filter lets you select exactly which stations should have access to your network.

Long Range - High Power Outdoor Bridge

• High data rate up to 54Mbps network speed
• High Output power1W
• Auto rate fallback in case of obstacles or interferences
• Supports WPA / WPA2 security enhanced function
• Supports WDS(Wireless Distributed System) bridge mode
• Provides station mode to act as a wireless LAN client station
• Supports roaming link integrity
• Supports authentication for wireless connectivity based on ESSID
• Provides 64/128 bit key length WEP data encryption
• Support 18V PoE

Sesami introduces SL-5GTW as professional outdoor solution at 802.11g protocol. It can offer reliable and high speed of data transmission up to 108Mbps (Super G) and especially powerful at bridge function. With watertight housing and equipped build-in lightning arrester, SL-5GTW is designed to endure almost any outdoor condition, rain, snow, sleet and lightning. For advanced installations, this Access Point has an integrated 802.3af Power over Ethernet (PoE) port that allows you to install the device in areas where power outlets are not readily available. Reset button is available, which enable customers to reset bridge easily. Multiple working modes, Access Point, Point-to-Point(PtP), Point-to-Multipoint(PtmP), Repeater, WDS(AP+Repeater), enable SL-5GTW to work as almost any part of network. With external antenna, they can transmit data effectively, spanning 25 kilometers. Network administrator can manage SL-5GTW from Web. For advanced network management, administrators can use AP Manager or SNMP management module to configure multiple access points from a single location. SL-5GTW Wireless Outdoor Bridge is ideal for connecting LANs in distant buildings at speeds approaching those of wired Ethernet. The hardware features of the 802.11a/b/g Access Point include a powerful 27dBm RF engine that is selectable between the 802.11b/g and 802.11a bands. Coupled with the added benefit of an external N-connector for custom antenna application, this product is one of the most flexible on the market today.

Sesami SL1000HS Wireless Outdoor AP / Bridge is an Integrated RF unit & Antenna into a Waterproof housing and compliance with IEEE 802.11b/g 54Mbps standard and operated at 2.4GHz Frequency Range. It supports 64/128-bit WEP Encryption, IEEE802.1x security, and SNMP, TCP/IP, IPX/SPX, NetBEUI protocols. SL1000HS Wireless Outdoor AP / Bridge equipped with 16dBi Panel Antenna and up to 1W output power constitutes an integrated outdoor bridge for wireless HotSpot & PTP or PTMP network. SL1000HS Wireless Outdoor AP / Bridge is easy-to-install, easy-to-manage (via web management), reliable and good performance for long distance Wireless connection.

HBS-500 is an all-in-one product specially designed for Hotspot and SMB (small & medium business) environment. It integrates “access control” and “traffic control” into one system to fulfill the needs in Hotspot. HBS-500 incorporates “convenience”, “efficiency”, “friendly” and other useful characteristics for services. No matter to deploy it in a restaurant, airport VIP lounge or coffee shop, business service center, conference room environment, HBS-500 can immediately achieve compatibility with the current network configurations, making it the ideal choice.

• 5ft. in Length
• Keep moisture out of your Connectors
• Flexible
• Recommend for all Coax Cable Connections

This is a Cost Effective High-Power Outdoor Wi-Fi Mesh Router and it's available in 2.4GHz (802.11b/g) model. SL4012HS is a High-Power-26dBm WLAN Broadband Router which fully supports the AP / Bridge / Client / Repeater / Router / Mesh / WISP / Gateway / AP+WDS / WDS features and functional compliance of IEEE 802.11b/g standard. It is designed to provide good performance and enhance the advantages of robust system and cost-effective. SL4012HS is targeted at competitive price-performance, better power management, SOHO and business offices.

SL-2TW is a Long Range Low Cost Wireless Bridge is used for offering a wireless interface, which eliminates the effort cabling for your LAN with the wireless feature. With being compliant to IEEE 802.11g specification, SL-2TW supports data rate up to 54Mbps and hence help to construct your high-speed home or office wireless network. This Access point equips one LAN port and one detachable antenna. With supporting DHCP server and client, the SL-2TW is easy to install and setup. The wireless security mechanism is provided over 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 and AES. SL-2TW is also backward compatible with IEEE 802.11b wireless devices.

Wireless CPE specially designed for ISP Operators to provide low cost CPE for internet subscribers SL-400CP features supports 802.3af Power Over Ethernet supports 70-85Mts distance Recommended distance 1-8KM. SL-400CP is have integrated 14dbi patch antenna

The Sesami Wireless Outdoor USB Client, combines the ease-of-use, convenience of USB plug and play installation, enabled PCs with the benefits of 54Mbps wireless operation in this full-featured solution for HotSpot Internet and Access Point LAN connections. Designed in 8dBi High Gain Outdoor Antenna, which provides more power and further distance range for your wireless network.

The Outdoor USB Client comes standard with a 10-meter double shielded and weather proofed USB cable, which gives you more flexibility in where you choose to mount your antenna. If more as 10m cable is needed you can add up to 15m active USB cable to max. 15m altogether. Furthermore, the USB Client can be mounted on wall, mast, or ceiling and includes a wall mounting kit. It is fully compatible with other 802.11b/g products.

• 2 x 10/100Base-T
• IEEE802.11b/g wireless interface
• Wireless AP, Gateway, VoIP adaptor and
• wireless client 4-in-1 device
• Life line support
• Web management for easy management and firmware upgrade
• Enhance wireless security with WPA/WPA2 support
• QoS support for superior voice quality

Coaxial Lightning and Surge Protectors are high-performance gas discharge tube suppressors that feature wide-band operation up to 3GHz

• 0.1dB Insertion Loss
• VSWR 1: 1.1
• Uses Gas discharge cartridge
• Rated 20 K Amp discharge
• Max RF power 75W
• N Male / N Female

SL-20PoE Support All range DC Power Adapter.

• RJ-45 Input / Output Connector
• Input / Output Common Ground
• Power / Data Mixer
• Ethernet Switches expand to Wireless Access Point
• DC Output Voltage & Current: All range DC Output depends on Input DC Power Adapter

SL-18ESP is special used in the network system and its different types can satisfydifferent defence thunder areas. The connector of its input and output is RJ45 male/female connector, which is easily connected and installed. The design of the product is according with IEC1643-2DRAFT standard, and it is main used in service equipment, inner LAS and HuB, and boardband RJ45 interface protection for protecting the equipment which will be damaged by the over voltage of the earth or the line inductance.

The SL-200RT wireless access point is used for offering a wireless interface, which eliminates the effort cabling for your LAN with the wireless feature. With being compliant to IEEE 802.11g specification, SL-200RT supports data rate up to 54Mbps and hence help to construct your high-speed home or office wireless network.

This access point equips one LAN port and one detachable antenna. With supporting DHCP server and client, the SL-200RT is easy to install and setup. The wireless security mechanism is provided over 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 and AES. SL-200RT is also backward compatible with IEEE 802.11b wireless devices. Turbo mode 72Mbps.

The Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10/100 Base-T networks. The unit meets or exceeds CAT5e performance for the two data pairs. In addition, the unit is compatible with 802.11af Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. This unit supports normal and reverse polarity PoE.

• Cispr 22’B’, Vcci’B’, Fcc’B’ Compliance
• Light Weight: 145g
• Efficiency Over 75%
• Over-Voltage Protective Installation
• Short-circuit Protective Installation
• Protection Type: Auto-Recover
• Operating Temperature 0℃~40℃

The SL-200RTN wireless access point is used for offering a wireless interface, which eliminates the effort cabling for your LAN with the wireless feature. With being compliant to IEEE 802.11b/g/n specification, SL-200RTN supports data rate up to 300Mbps and hence help to construct your high-speed home or office wireless network. This access point equips one LAN port and one detachable antenna. With supporting DHCP server and client, the SL-200RTN is easy to install and setup. The wireless security mechanism is provided over 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 and AES. SL-200RTN is also backward compatible with IEEE 802.11b wireless devices.

Connects at a full 54Mbps via USB 2.0, up to 8 times faster than a USB 1.1 adapter , High gain upgradeable (500mw), Compact size for greater flexibility, Also compatible with USB 1.1 desktop and notebook computers , Plug-and-Play Compatible with windows 98SE, 2000, Millennium, XP and Linux , High security 64/128/256bit WEP Encryption, TKIP, WPA, 802.11

High Power WLAN USB adapter (SL-40US EXT) fully supports the features and functional compliance of IEEE 802.11b/g standard. It enables the deployment the latest updated WMMTM (Wi-Fi Multimedia). Our WLAN USB provides competitive price, high power and stable performance to PC & NB linked into wireless world.

The SL-100PCN IEEE 802.11n Wireless PCI adapter provides users to launch IEEE 802.11n wireless network at 300 Mbps in the 2.4GHz band, which is also compatible with IEEE 802.11b/g wireless devices at 11/54 Mbps. You can configure this adapter with ad-hoc mode to connect to other 2.4GHz wireless computers, or with Infrastructure mode to connect to a wireless AP or router for accessing to Internet. This adapter includes a convenient Utility for scanning available networks and saving preferred networks that users usually connected with. Security encryption can also be configured by this utility.

The IEEE802.11n Wireless Router is compatible with IEEE802.11n standard, which supports data rate up to 300 Mbps in 2.4 GHz band, which is also compatible with IEEE 802.11b/g wireless devices. The router allows multiple users to share one broadband connection, as well as secures your private network. With its built-in 4-port switch and wireless AP, LAN users can share files, printers, or playing network games all at a blazing speed.

To provide a secure wireless network, this router supports wireless data encryption with 64/128-bit WEP, WPA and WPA2. Network Address Translation (NAT) Firewall is also support to shield your communications and network from hackers and wireless eavesdroppers

Connects at a full 54Mbps via USB 2.0, up to 8 times faster than a USB 1.1 adapter, High gain upgradeable (200mW),Compact size for greater flexibility, Also compatible with USB 1.1 desktop and notebook computers, Plug-and-Play Compatible with windows 98SE, 2000, Millennium, XP and Linux,Vista,High security 64/128/256bit WEP Encryption, TKIP, WPA, 802.11

• SMA(M) to MMCX, LMR 100
• RPSMA(M) to RPSMA(F) LMR 10
• SMA(F) BH to UFL 1.37 mm cable
• MCX plug to MCX Jack RG178
• N(F) Bulk Head to MCX LMR 100
• N(M) to SMA(F) RG 142 double Shielded
• N(M) to N(M) LMR 400
• N(M) to N(M) RG 142 double Shielded
• SMA(F) to SMA(M) RG 142 double Shielded
• N(F) to SMA(F) LMR 200

Feature

• Support Wireless Access Protocol – 802.11b/g
• Direct Sequence with data rates at 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbps
• Support Site Survey --- scan available APs in handset’s environment
• Implementing IETF RFC-3261SIP Protocols
• ITU-T ,iLBC, G.729, G.723 and G.711 Voice compression coder-decoder compliant
• VAD (Voice Activity Detection) /CNG (Comfort Noise Generation) Silence
• Compression – Annex B of G.723
• Echo Canceller , Instant Message , Support IP Camera (ISMA)
• Support both DHCP and static IP
• Internet Protocol Support: IP, TCP, UDP, ARP, HTTP 1.0, DHCP, DNS
• Rechargeable Batteries – Li-ion
• Phone keypad and graphic LCD display
• Phone Configuration through handset LCD setup and web
• Time protocol support (SNTP).
• Skype connection (through Atonics proprietary SIP/Skype Gateway)

This is a Cost effective high-power Outdoor Wi-Fi mesh router and it's available in 2. 4 GHz (802. 11b/g) model. SL-4012HS is a High-Power 26dBm WLAN Broadband Router which fully supports the AP / Bridge / Client / Repeater / Router / Mesh / WISP / Gateway / AP WDS / WDS features and functional compliance of IEEE 802. 11b/g standard. It is designed to provide good performance and enhance the advantages of robust system and cost-effective. SL-4012HS is targeted at competitive price-performance, better power management, SOHO and business offices.

Sesami SESWAVE-E1 is a High Power Outdoor E1 Wireless Transmission System specially designed for Telecom Service Provider applications in any harsh environments. It is not just an N-in-1 box, but employs up to 24dBm (250mW) 802.11a, 27dBm (500mW) 802.11b/g RF Output Power which enables Telecom Service Provider to reach more customers in broader area. For today’s competitive telecom market, SESWAVE-E1 is able to transmit framed and non framed E1 signal through IP network. Divided into Outdoor unit and Indoor unit.

SESWAVE-E1 outdoor unit works on 2.4GHz / 5.8GHz frequency, complied with IEEE802.11a/b/g protocol. It can offer reliable and high speed of data transmission up to 108Mbps (Super G) and especially powerful at bridge function. Using OFDM technology builds the feature of higher transmission efficiency, higher sensitivity and farther transmission distance etc. Using outdoor design and External antenna make it easily to install. By enabling cell telecom manager, corporations and ISPs to bridge the gap between multiple buildings, you will not incur the expense of leased lines or fiber runs. SESWAVE-E1, indoor unit is able to bidirectionally transparently run one E1-line or two E1-lines across the packet-switched network.. Supported UDP/TCP. Addressing of packet-switched is based on IP address, so these packets can pass through Hub and Router etc.

• 2 x 10/100Base-T
• 1 x FXO + 2 x FXS
• 8 SIP lines + 2 SIP trunk
• Highly registered SIP IP PBX
• Built-in registrar and proxy server
• Scalable up to 100 sites
• Supports samecall features as tradittional PBX
• Registers to ITSPs (IP telephony Service Providers) for additional and value-added services
• Comprehensive networking management and software upgrades

Wireless access point specially designed for ISP Operators to provide low cost CPE for internet subscribers SL-200CP features supports 802.3af Power Over Ethernet supports 70-85Mts distance Recommended distance 1-8KM. SL-200CP is have integrated 12dbi patch antenna.

• Adjustable RF Output Power (200mW – 802.11b/g)
• Antenna Beam width – H 65’ V 30’ , Gain with Radome 12 dBi (Min) POE