Capacity:	2/20/100/200/500/1000/2000/5000 Kgf
Resolution:	0.1 gmf for 2 kgf. 1 gmf for 20 kgf. 0.01 kgf for 100/200 kgf. 0.1 kgf for 500/1000/2000 kgf. 1 kgf for 5000 kgf.
Accuracy:	+-0.5% of applied load.
Cross head speed:	1-25/5-100/25-500 mm/min Continuously variable within specified range.
Accuracy of speed	:+-1% or better.
Strain measurement:	Cross-head measurement range 0-1000 mm * 1mm (Optional: 1mm built-in clip.In Extensiometer range 0-1000mm * 0.002mm)
Accuracy:	+-1%
Displays:	In computer's Monitor.
Width between guides:	450 mm
Cross-head traverse:	1000mm Control: Through computer.
Recording/Printing :	In Ink-jet printer. (Optional:-Laser printer)
Grips :	Tension,Compression,Flexural.
Power requirement:	220/240 Volts,AC,50 Hz,1 Phase,Mains

Digital Tensiometer

Meets IS , BS, ASTM, DIN, ISO etc. Type : Horizontal, Table Top. Load Range : 0-200/2000 Kg Load Indication : 4.5 digit display. Strain Range : 0-400 x 0.1mm (based on cross-head movement) Strain Indication : 4 digit display. Cross Head-speed : 1: 10 ratio (5-50/25-250/50-500 mm/min) Mains : 220 Volts, AC, 50 Hz, 1Ph.

Digital UTM Type 1

MODEL	DTV-1	DTV-2	DTV-3	DTV-4	DTV-5
CAPACITY *Kgf	2	20	100/200	500/1000/200	5000
RESOLUTION	0.1 gmf	1 gmf	0.01kgf	0.1kgf	1 kgf
INDICATION	DIGITAL
EXTENSION mm	1000				600
RESOLUTION mm	0.1
INDICATION	DIGITAL
SPEED mm/min	300,500	100,500	100,300,500	100,300,500	5,10,50
GRIPS	TENSION,COMPRESSION,FLEXURAL
MAINS	220/240 VA.C 50 Hz 1 P or 440/460 V A.C. 50 Hz 3P
SPECIAL FEATURE	AUTO STOP AT BREAK PEAK LOAD, MAXIMUM EXTENSION AT BREAK
SAFETY	AUTO STOP AT MAXIMUM CAPACITY AUTO STOP AT BOTH OF EXTENSION
*CAPACITY IN NEWTON IS ALSO AVILABLE

Erichsan Coupping Testing Machine

MEETS IS & ASTM
Application : Thickness of specimen 0.1mm to 2mm width of specimen 90mm.
Test Specimen: The following three type of specimen are used in normal test.
* 90±2mm square metal sheet.
* 90±2mm circular metal.
* Rectangular specimen having with 90+-2mm.

Fatigue Tester

MEETS IS, ASTM, BS & JIS

Diameter of test specimen	: 7.5 mm
Maximum bending moment	: 200 Kg.Cm/500 Kg.Cm
revolution measurment	: 8 digit LED display
Motor capacity	: 0.5 HP, 1425 rpm, Single Phase
Main Supply	: 220/240 Volt , 50 Hz, AC, 1 Ph.

Metalurgical Belt Grinder

The grinder is 36" long, 4" wide and is attractively finished with lifting handle on ON/OFF switch. It is supplied with Cord Switch, Plug and Grinding belts. A 1/4 horse power motor drives one of the two pulleys on which belts of various grades of roughness are involved. Operation on 220/230 Volts A.C., single phase, 50 cycles.

Metalurgical Mounting Press

Load Capacity : 6000 Kg.
Hydralic type , Hand operated.
Complete with Mould Heater . Mould Cooler, Mould Heater Controller

Metalurgical Polishing Machine

Electrically driven 8" or 10" Polisher available in one ,two or three disc models. A protective cover over the turnable, drain tube, bosshead support with metal rod to carry the drip reservoir are provided. Speed: 300 to 1200 r.p.m. infinitely variable(Variac control). Operation on 220/230 v. 50 cycles, A.C.
Also we have--
Two fixed speed 700 and 1400 r.p.m.
Operation on 220/230 v. 50 cycles, A.C.

Metalurgical Sample Cut Off Machine

The Sample Cut-Off Machine has the following specifications:
(A) Saw(Diamond) : (a)Diameter 8" (b)Thickness 1/16" (c)Depth of diamond impregnetion 3/16" on the rim. (d)Diamond size 100 grits (e)Diamond concentration 100 (f)Circumfactial speed while running approx. 4500-6000 r.p.m
(B) Protective cover for Saw : Provided with locking device.
(C) Motor : 1/2 h.p. 220/230 volts. 50 Hz. Single phase A.C. 1400 r.p.m.
(D) Lubrication and Cooling : The cutting tray is mounted on the liquid tank provided with overflow and drain nozzel.The saw is at all time half submerged in the tank.A splash guard is also provided.
(E) Jaws : Provided with adjustable movements in two directions at rightangle to each other.
(F) Cutting pressure : Constant, exerted by pressing weight place on weight hanger.

Spring Tester-Digital

Load Range	: 0-20/200/2000 Kg
Load Indication	: 4.5 digit display
Deflection	: 0-20 mm x .001 mm
Deflection Display	: 4.5 digit display
Stroke	: 100 mm
Table Size	: 150 mm dia
Mains	: 220 volts ,AC, 50 Hz , 1 Ph

Spring Tester-Hydrolic

Electric cum Hand operated Hydraulic type loading through pump.

Capacity	: 2000 Kg. (Maximum).
Platen Sizes	: 150 mm dia.
Type	: Tension & Compression combined.
Gap between platens	: 300 mm.
Mains	: 440 Volt, AC, 50 Hz. 3 Ph.

Spring Tester-Torsional

For testing Torsion Spring with this machine; Wire

Diameter	: 1mm to 4mm
Spring length	: 10mm to 200mm
Spring diameter	: 5mm to 150mm
Torque maximum	: 14 kgf-cm
Deflection	: Any number of degrees or revolutions Accessories: One set of small brass weights, arbor stand with 16 arbors 1mm to 4mm complete.

Soft Gem Exports Private Limited

TESTING INSTRUMENT/CIVIL (4)

TESTING INSTRUMENT/METAL (12)

TESTING INSTRUMENT/PACKAGING (19)

TESTING INSTRUMENT/PETROLEUM (17)

TESTING INSTRUMENT/POLYMER (24)

TESTING INSTRUMENT/RUBBER (24)

TESTING INSTRUMENT/METAL

Computerised UTM