Shabis Enterprises

"Spitmaan" jointing sheet technology is based on a tradition which streches back over few decades.With close co-operation with our customers,by constant development of composition of materials and by use of high quality raw materials,the company has produced reliable gasketing products,which always correspond to the latest state of technology.

  "Spitmaan" products are developed with the strong belief on the proven fact that the most qualitative gasket is cheaper than the work necessary for changing an improper gasket.

Also available with antistick polymer / Graphite surface coating
Tests : Tests are conduced in our laboratory equipped with latesttesting equipments according to international test specifications &ISI. Some of the important tests carried out are for Compressibility,Recovery,Stress relaxation Flexibility & Resistance to fluid media besides the routine tests for tensile strength,ignition loss,density etc

"Spitmaan" Metallic Jointing Sheets: With the operating temperature and pressure high and when the effective gasket area is small , jointing sheets with wire gauze reinforcement are suggested to be used.

Spitmaan Asbestos jointing sheet sizes:

     Nominal Sheet Thickness Approx.(mm) 0.4 / 0.5, 0.75 / 0.8, 1.0, 1.5, 2.0,3.0,&Above upto 6.0 mm/sheet size approx.1525 mm*1650 to 5000mm (variation /-5%)

There are different style like:

• Style 20 Steam in Metallic & Non Metallic
• Style 51 High Pressure in Metallic & Non Metallic
• Style 54 Super in Metallic & Non Metallic
• Style 59 Oil in Metallic & Non Metallic
• Style 60 Acid

All Kinds of Rope are also avabile in different Style 1000, 1100,1994, 1094, 1916

A manometer is a pressure measuring instrument, usually limited to measuring pressures near to atmospheric. The term manometer is often used to refer specifically to liquid column hydrostatic instruments. Types we offer are:

Metallic & Acrylic Body Manometer
Micro and acrylic body portable manometer are fabricated from thick acrylic solid block, vertically unbreakable stable free of distortion & metallic from powder coated Al. Sheet. PVC plastic engraved scale zero adjustment knob and panel mounting holes are provided with manometer with red liquid Sp. Gr. 0.81

Acrylic single limb manometer.
Std. Range: 100, 150, 200, 250, 300 mm H₂O

Acrylic 'U' Tube manometer (Precision Measurement of Differential Pressure)
Std. Range: 100-0-100, 150-0-150, 200-0-200, 250-0-250 mm H₂O

Acrylic Inclined manometer (Easy reading of low pressure)
Std. Ranges : 10, 12, 15, 25, 50, 75, 100 mm H₂O

Metallic single limb & 'U' Tube Manometer
Wall & Stand mounted available
Std Ranges : 100, 150, 200, 250, 300, 400, 500, 700 & 1000 mm H₂O

Rota Meter
"Micro" Acrylic & Glass tube rota meters are general purpose, direct reading recommended for universal use, where a reliable sensitive repeatable indication of continuous flow rate is required for process controls.

Glass Tube Rotometer

Casing

PS Pressure Switches are essentially meant for On-off pressure control applications such as air compressor or water pump and makes it work between the minimum and maximum setting values,at the maximum setting value,pressure switch opens and stops the motor , at the minimum value , pressure switch close and starts the motor

RTD Series of Pressure Switches utilize seamless bellows as the sensing element.Simplicity of design and ease of installation has been stressed for reliable use,even in applications where shock and vibration are present.The sensing element can be used for a variety of process fluids.

IPS Series of Temperature Switches have a vapour filled thermostatic element, which consists of a sensing buib, capillary tube and a bellows element,The entire element contains a charge which reacts to temperature variations at the sensing bulb, so that pressure on the bellows increases on rising temperature.The bellows movaement due to this increase in pressure is utilised to operate  the switch .

Models available PS ,IPS,RTD,IMVD ,EVJD etc.

Pressure Transmitter for general application models S-10 / ECO- TRONIC

Accuracy           : 0.25 up to 1.0% of span
Pressure range   : 0....0.1 up to 0....1000 bar
                           -1....0 up to -0.1...0 bar
  Options              : Flush diaphragm
                            Ship Approval
                             oxygen version