Our establishment is a trusted name in manufacturing and supplying Spray dryers. These spray dryers comprise a large cylindrical chamber basically vertical in position in which the material is dried into small droplets. These droplets are further fed with hot air which is enough sufficient for supplying the heat to complete evaporation of liquid. Our concern can easily manufacture laboratory size to large size spray dryers for industrial plants. The design description is as follows:

Co-current Type : Feed and hot air come from same side. Feed is from rotary atomiser and nozzle.

Counter Current Type : Feed is From top side the feed is given and hot air comes from the bottom side. Feed is taken from rotary atomiser and nozzle.

Co-counter Type : Here the feed comes from bottom side and hot air flows through top which is the Fountain side. Feed atomisation is taken through pressure nozzle or two sided fluid nozzle.

The chamber design comprises following features:

• High pressure nozzle on tall tower
• Construction in a bustle type format
• Availability of Rotary Disc Atomiser Type

The atomization system has the following characteristics:

• Pressure nozzle available
• Two fluids provided
• Provision of Rotary Disc Atomiser Type

Our products have a high demand in the following industries:

• Tile ceramic industries
• Dyes intermediates
• Extraction of herbal
• Production of natural products
• Food Pocessing
• Manufacturing of tea

Apart from commercial Drying Plant Shachi Specialises in table top spray dryers. These plant are mainly used for laboratory requirement. We have different models for these plants. Capacity ranges from 0.5 l/hr to 3 lt/hr.

Our establishment is a trusted name in manufacturing and supplying high quality flash dryers. Our flash dryers are extensively required for drying powders and granules , crystalline material. The wet material is diffused into stream of hot air or gas which fetches through a drying duct. Further the product separation is done using cyclones or bag filters. With the help of flash dryers. feed materials such as powders, gels, slurries, granules and flakes can be easily processed. For pastes, or sticky materials, backmixing of the wet feed with a portion of dry product to produce a suitable conditioned material is required. These flash dryers are utilized in industries like food, mineral, polymer and chemical. Our flash dryers include the following features:

• Cost effective during installation
• High efficient thermal power
• No need of extra machinery for drying with pneumatic conveying
• With additional cage mill crushing of lumps very easy
• High capacity power with less space

We are manufacturing spin flash dryers as they are needed for drying solutions of Thick and viscous fluid, Thick Paste and Cakes. Our product spin flash dryers are specially made so as to avoid accumulation and sticking and also not to create any kind of deposits.

The Integrated Fluidised Spray Dryer combine spray drying and fluid bed drying technologies. Operational flexibility enables production of a wide range of physical properties and excellent thermal efficiency because drying at lower temperature.

The spray is created by a spray nozzle atomizer down towards the fluid bed where agglomeration incorporating finer, recycled material takes place. Exhaust air outlet is let through the roof causing further agglomeration in the spray zone. The recirculation system uses cyclones or bag filters, or a combination of both to recycle fines to the spray dryer chamber, the integrated fluid bed, or the external fluid bed. The process produces non-dusty, free flowing agglomerated powders with high flavor retention. Third stage fluid bed drying / cooling can be done .

Sticky products can successfully be dried, and the concept is ideal for drying heat sensitive products, and improved aroma retention is accomplished.

This design concept is successful for drying high fats, hygroscopic, and sticky products that are difficult to handle in more conventional designs.

Our company is engaged into manufacturing premium quality pilot plants which have high durability and are resistant towards all kinds of defects. Following are some the attributes of pilot plants:

• Capacity ranging from 3 k.g. to 10 kg water evaporation.
• Provided in stainless steel.
• Laboratory plants available with self cleaning nozzles.
• Simple and skid mounted arrangement.

As a leading manufacturers of evaporators we, Sachi are engaged into making thermal evaporators which are actually the thermal concentrators. These are used for reducing volume by evaporating water, for increasing the content of solids and concentrating dilute liquids. The Evaporators are used as very economic for steam as:

• Kg of solvent evaporated per Kg of steam used.
• Reusing evaporated solvent as heating medium.
• Higher steam economies are achieved.

These methods of increasing utilization of steam are used in multi-effect evaporator. Our company manufactures the evaporators in following types:

Falling film evaporators: These evaporators are made so that the hold up time and residence time is short therefor the liquid does not get overheated and feed gets distributed finally a thin film is formed. These evaporators have high demand in various industries .

Rising film evaporators: Such evaporators are simple in design and absolutely suitable for corrosive liquids finally they are very useful moderately heal sensitive product.

Forced circulation evaporators: These kind of forced circulation evaporators are best suitable for crystalline products, corrosive viscous solutions and can handle the salting, scaling and fouling liquids.

Short tube vertical evaporator: These special Short tube vertical evaporators are highly demanded in sugar industries as they are not only cost effective but also help in de-scaling.

Shachi provides a complete range of rotatary valves suitable for air lock applications suitable for cyclone , dust collectors, and storage devices like Silos or to the pneumatic conveying system . The basic use of the rotary airlock valve is as an airlock or sealing pressurized systems against loss of air or gas while maintaining a flow of material between components with different pressure. Our Rotary Airlock valves have wide application in industry wherever dry free-flowing powders, granules, crystals, or pellets are used. Typical materials include: Chemicals , Dyes, minerals, grains, plastics, dust, fly ash, flour, gypsum, lime, coffee, cereals, pharmaceuticals, etc.

Our concern manufactures a wide range of Nauta Mixers / Blenders which are utilized in various industries. These equipment which we are making comprise the following features:

• Low consumption of power .


• Accurate high mixing accuracy .


• Homogeneous mixing.


• Capacity range from 600 liters to 20000 liters.


• Online Blender.

We engrossly engaged in manufacturing and supplying detergent plant used for cleaning the soils. Our main focus is on substrate i.e. textile fabrics. The detergent plant is produced on account of following points:

• Use of premium raw materials


• Easy manufacturing


• Cost effective


• Perfectly suitable to finished products


• In accordance with present market trend.

We also manufacture the gas burners for various industries and for a range of applications. These burners are been made from high quality mild steel and quality conduit pipes are been used in it. Each of the gas burnert is been tested for the gas leaks before delivery. These gas burners are been supplied with a mechanical control panel for temperature control and is been sofisticatedly made for best efficiency in terms of the gas usage.