We are manufacturing ARAI approved Hydraulic Mobile crane S-MAN 9. It has been fitted with Simpson S 433(I) FI Bharat Stage II, 4 cylinders, water cooled diesel engine., it is mounted on a heavy duty main frame which assures stability of the crane.

Features

• All plates in bottom chassis are in single piece.
• Clear visibility for operator due to off side cabin.
• Combination switch for all signals & lights
• Convenient steering wheel.
• Right side steering wheel makes it easy to drive.

Technical Specifications

Engine Rated power
49 BHP (36.5KW) at 2200 rpm.

Transmission
Sliding mesh with 6 forward and 2 reverse speeds and high low range selector.

Top speed
28KMPH without load.

Steering
Hydrostatic steering wheel with 45 degree articulation on both sides and maximum 6.7 mtrs turning radius on outer rear wheels and minimum 3.9 mtrs radius on inner rear wheels.

Hydraulic system

• Main pump vane type
• Three spool control valve
• Two double acting hydraulic cylinders for main boom.
• Two double acting hydraulic cylinders for steering.
• One double acting hydraulic cylinder for extension of boom.
• Geared motor for winch.

Telescopic boom
Two part boom with hydraulically operated extension of 1800mm stroke.

Electrical system
+12V. Negative earth with 35 amp. alternator

Tyres
Front 11.00 x 20 16 PR(4nos.), Rear 13.00 x 24 12 PR(2 nos.)

Safety features

• Hose burst safety valves in main boom.
• Buzzer system on over hoisting.
• Fabricated safety guard for cylinders
• Fire Extinguisher.
• Laminated front wind shield.
• Front fog lamp.
• Hazard switch.
• Driver’s safety belt.

Approved by ARAI our Hydraulic Mobile crane S-MAN 11 is robust in structure with a high grade industrial design for efficiently meeting the extreme conditions at site. It has been provided with two part telescopic boom with hydraulically operated extension. Not only this, its boom hoist is through heavy duty hydraulic motor operated winch with suitable rope size. Also its heavy duty forged hooks are mounted on the boom. Following are some its string features which makes it a demanding amongst the companies:

Features

• All plates in bottom chassis are in single piece.
• Clear visibility for operator due to off side cabin
• .Combination switch for all signals & lights
• Convenient steering wheel.
• Right side steering wheel makes it easy to drive

Technical Specifications

Engine
Simpson S 433 (I) F1 Bharat Stage II (CEV), 4 cylinders, water cooled, diesel engine.

Rated power
49 BHP (36.5KW) at 2200 rpm

Transmission
Sliding mesh with 6 forward and 2 reverse speeds and high low range selector.

Top speed
28KMPH without load.

Steering
Hydrostatic steering wheel with 45 degree articulation on both sides and maximum 6.7 mtrs turning radius on outer rear wheels and minimum 3.9 mtrs radius on inner rear wheels.

Brakes
Hydraulic operated front and rear brakes.

Hydraulic system

• Main pump vane type.
• Three spool control valve.
• Two double acting hydraulic cylinders for main boom.
• Two double acting hydraulic cylinders for steering.
• One double acting hydraulic cylinder for extension of boom.
• Geared motor for winch.
• Two cylinders working as brakes for winch.

Telescopic boom:
Two part boom with hydraulically operated extension of 1800mm stroke.

Tyres:
Front 11.00 x 20 16 PR(4nos.), Rear 13.00 x 24 12 PR(2 nos.)

We are trusted manufacturer of Hydraulic Mobile crane S-MAN 12 featured with sturdy construction and robust structure for meeting the rigorous conditions at site. As far as its physical construction is concerned, it is provided with sliding mesh (6 forward and 2 reverse) power transmission system with high/ low range selector.

Features

• All plates in bottom chassis are in single piece.
• Convenient steering wheel.
• Right side steering wheel makes it easy to drive.

Technical Specifications

Engine
Simpson S 433 (I) F1 Bharat Stage II (CEV), 4 cylinders, water cooled, diesel engine.

Rated power
59 BHP at 2200 rpm

Transmission
Sliding mesh with 6 forward and 2 reverse speeds and high low range selector

Top speed
28KMPH without load

Steering
Hydrostatic steering wheel with 45 o articulation on both sides and maximum 6.7 mtrs turning radius on outer rear wheels and minimum 3.9 mtrs radius on inner rear wheels.

Hydraulic system

• Main pump vane type.
• Three spool control valve.
• Two double acting hydraulic cylinders for main boom.
• Two double acting hydraulic cylinders for steering.
• One double acting hydraulic cylinder for extension of boom
• Geared motor for winch.
• Two cylinders working as brakes for winch

Telescopic boom
Two part boom with hydraulically operated extension of 1800mm stroke

Electrical system
12V. Negative earth with 35 amp. alternator

Tyres
Front 11.00 x 20 16 PR(4nos.), Rear 13.00 x 24 12 PR(2 nos.)

Safety

• Hose burst safety valves in main boom.
• Buzzer system on over hoisting.
• Fabricated safety guard for cylinders
• Fire Extinguisher.
• Laminated front wind shield.
• Front fog lamp.
• Hazard switch.
• Driver’s safety belt.

Our ton hydraulic mobile cranes are mounted on a heavy duty main frame assuring full stability of the crane. It has three part telescopic boom with hydraulically operated extension. It has hydrostatic right side steering wheel making the driving part very easy and convenient.

Our company is manufacturing qualitative Pick-n-carry crane S-MAN 9 approved by ARAI crane which is fitted with Simpson S 433(I) FI Bharat Stage II, 4 cylinders and water cooled diesel engine. It has been mounted on a heavy duty main frame which assures complete stability of the crane. Further, it is also provided with two part telescopic boom with hydraulically operated extension.

Its boom hoist is through heavy duty hydraulic motor operated winch with suitable rope size. Along with its sliding mesh (6 forward and 2 reverse) power transmission system it has high/ low range selector and suitable heavy duty clutches. With its both front and rear heavy duty service brakes, it even has mechanical operated parking brake. As far as its capacity is concerned, it works on 12V electrical system provided with an alternator ad battery.

Features

• Low diesel consumption.
• Heavy fabricated articulated chassis. .
• Right side cabin view for better maneuvering. .
• Convenient steering wheel. .
• Hydraulic hose break safety valves. .
• Ground clearance of 400mm. .
• Safety belt for operator etc

The S-MAN 11 pick-n0carry crane is approved by ARAI crane which is fitted with Simpson S 433(I) FI Bharat Stage II, 4 cylinders and water cooled diesel engine. Has been mounted on a heavy duty main frame for ensuring the stability of the crane. Further, it has been also provided with two part telescopic boom with hydraulically operated extension.

Along with its sliding mesh (6 forward and 2 reverse) power transmission system, it has high/ low range selector and suitable heavy duty clutches. For the ease of the operator sitting in the cabin, complete ventilation is provided with good all around visibility. The controls and pedals are located inside the cabin for ease of operation.

Features

• Low diesel consumption.
• Heavy fabricated articulated chassis.
• Right side cabin view for better maneuvering.
• Convenient steering wheel.
• Hydraulic hose break safety valves.
• Ground clearance of 400mm.
• Safety belt for operator. Etc.

We are one of the most prominent names in manufacturing Pick-n-carry S-MAN 12 fitted with Simpson S 433(I) FI Bharat Stage II, 4 cylinders and water cooled diesel engine. As far as its working is concerned, it is mounted on a heavy duty main frame ensuring safe stability of the crane. It has two part telescopic boom with hydraulically operated extension. Also it has sliding mesh (6 forward and 2 reverse) power transmission system with high/ low range selector and suitable heavy duty clutches. The operator’s cabin has been provided with full ventilation along with good all around visibility. The controls and pedals are located inside the cabin for ease of operation.

Features

• Low diesel consumption.
• Heavy fabricated articulated chassis.
• Right side cabin view for better maneuvering.
• Convenient steering wheel.
• Hydraulic hose break safety valves.
• Ground clearance of 400mm.
• Safety belt for operator etc

We are known name in manufacturing ton pick-n-carry cranes which are mounted on a heavy duty main frame ensuring safe stability of the crane. It has three part telescopic boom with hydraulically operated extension. Apart from this, it has sliding mesh (6 forward and 2 reverse) power transmission system with high and low range selector and suitable heavy duty clutches. The operator’s cabin has been provided with full ventilation along with good all around visibility.

So as to understand the machine’s parts better, we provide spare parts manual with the dispatch of machine. Our machines, their chassis and engines are recognized by their serial numbers. This booklet helps a lot in knowing the different assemblies of the components, dimensions; nomenclature of spares parts of S-MAN cranes.

We are offering standardized hydraulic crane accessories including AC cabin and FM radio as optional accessories with the crane. Its standard equipments comprise front and rear work lights, reflectors, front crash guard and standard tool kit.

Shakti is engaged in the manufacturing and exporting of light fabricated material ranging from 5mm to 16mm. It is exporting fabricated steel structure, chassis, steel main frames and fabricated components to various countries.

Shakti is engaged in the manufacturing and exporting of heavy fabricated material ranging from 12mm to 50mm. It is exporting fabricated steel structure, chassis, steel main frames and fabricated components to various countries.