Shalimar Group

Grades of Steel for body High Carbon. High Carbon Low Alloy. Application Industry Wood Cutting Wood Working Ripping & Cross Cutting for Plywood Stone Cutting Metal Cutting Paper Cutting. Size Parameters Plain Wood Working Tungsten Carbide Tipped Diamond Tipped Max.O.D. 430 mm 430 mm 430 mm Min.O.D. 100 mm 100 mm 100 mm Blank Thick : Maximum 3.50 mm 3.50 mm 3.50 mm Minimum 0.90 mm 0.90 mm 0.90 mm Bore : Maximum 80 mm 80 mm 80 mm Minimum 12.7 mm 12.7 mm 12.7 mm Hardness of Saw Body 42 - 44 Rc. Surface Finish Bright Types Plain Wood Working Tungsten Carbide Tipped Blanks for Diamond Tipped & TCT saws.

Hardened and Tempered Steel Strips Anil Special Steel Industries Ltd has been a leader in Hardening and tempering technology in India over past 31 years. Anil Special Steel Industries Ltd is equipped with the traditional oil quenching furnaces as well as the most modern Lead quenching furnaces. With these manufacturing capabilities Anil Special Steel Industries Ltd offers customer specific products for various applications Application Industry Band Saw Blades for wood working Hand Saw for wood cutting Cross cut saws and Pit saws for wood cutting Flat springs for automobile Clutch plates Shims and Washers for automobile industries Circular Saw Blanks Engineering Industry Masonry and Agricultural tool Industrial knifes Stone cutting Spring etc. Manufacturing Capabilities Width 6mm to 400mm Thickness 0.10mm to 3.5mm Finish Bright / Blue / Bronze and Grey Edges Sheared, Round and square edge Flatness Maximum 0.025mm in 25.4mm width Grades High / Medium Carbon and Alloy steel Camber Maximum Deviation +/- 0.50mm per 1000mm length Cut Length Max length 3000mm + 2mm - Nil, Minimum length 500mm + 2mm - Nil Coil Weight Maximum 4.00kg/mm strip width Packing The strips are normally packed with light coat of V.C.I. oil followed wrapping with thick polythene film and finally with polythene lined Hessain strips. These are further covered with sea worthy G.I. sheets and strapped on metallic pallets in case of exports. Tolerances Our Tolerance Range for Thickness Preferred Nominal (Thickness in mm) Permissible thickness variation in the case of nominal width (in mm) <125 >125<250 >250 0.10 to 0.12 0.008 0.012 0.015 0.15 to 0.20 0.012 0.015 0.020 0.25 to 0.35 0.015 0.020 0.025 0.40 to 0.50 0.020 0.025 0.030 0.60 to 0.90 0.025 0.030 0.035 1.00 to 1.20 0.030 0.035 0.045 1.50 to 2.00 0.035 0.045 0.055 2.50 to 3.50 0.045 0.055

Anil Special Steel Industries Ltd is one of the leading players manufacturing medium/ high carbon and low alloys cold rolled spheriodized annealed steel strips catering to domestic as well as various international markets like USA, Europe, South East Asia, Mediterranean countries, Middle East and all SAARC countries.Application Industry Cutting tool- Hack Saws Power saws and band saws Automobile Industry- Clutch, Horn Diaphrams, Seat Belts and brake assemble Chain Links Circlips and washers Medical-Surgical Blades Manufacturing Capabilities Width 6mm to 395mm Thickness 0.2mm to 4.5mm Finish Bright and Matt Flatness When a five-meter length of the strip is allowed to lay on a flat surface no part of the strip shall lift more than five mm from the flat surface by its own weight Grades High Carbon, Medium Carbon, Low Carbon and alloy steel Camber Maximum Tolerance on edge camber in any 2000mm length: 10mm Coil Form In Slit width or Mill width Cut Length Max length 3000mm + 2mm - Nil, Minimum length 500mm + 2mm - Nil Coil Weight Minimum 1kg/mm strip width, Maximum 8kg/mm strip width Coil Dimensions Coil I.D. can be offered with 300mm, 400mm & 500mm Packing The cold rolled strips are packed with light coat of V.C.I oil followed by wrapping with thick polythene film and finally with Polythene lined Hessian strips. These are further covered with Sea worthy G.I. sheets and strapped on metallic pallets in case of exports. Tolerances Our Tolerance Range for Thickness Preferred Nominal (Thickness in mm) Permissible thickness variation in the case of nominal width (in mm) <125 >125<250 >250 0.10 to 0.12 0.008 0.012 0.015 0.15 to 0.20 0.012 0.015 0.020 0.25 to 0.35 0.015 0.020 0.025 0.40 to 0.50 0.020 0.025 0.030 0.60 to 0.90 0.025 0.030 0.035 1.00 to 1.20 0.030 0.035 0.045 1.50 to 2.00 0.035 0.045 0.055 2.50 to 4.00 0.045 0.