 | | Products Empowered by our sophisticated infrastructural facilities, we offer a wide range of testing equipment and instruments for plastic, rubber and cables that includes universal tensile testing machine, impact tester, melt flow index tester, vicat tester, oxygen tester, density tester, gas tester, carbon black content tester, environment tester, material testing system and drop tester. These are specially designed to provide accurate measurements and evaluations of the concerned products on different parameters. These are used by various testing houses, manufacturers and other commercial establishments to check the conformity of their products as per different national and international standards. |
Carbon Black Content Tester We offer carbon black content tester to assess the carbon black rate of polyolefin in DSH sets. This compact module is provided with clearly visible tube furnace, glass-wares, rubber pipes and fastener on a solid wooden panel. The tubes are perfectly fastened and do not come in contact with the hot agents, thereby ensure completely safe processes. This table top modal is provided with a working height platform of client’s choice.The instrument is as per IS 2530-1963 Specifications:
- Temperature range: Maximum up to 1000°c
- Working temperature range: Up to 800°c
- Temperature accuracy and least count: Temperature accuracy better than ±5°cLeast count ±1°c
- Power supply : 240vAC, single phase 50Hz
- Heater capacity : Maximum 2kw tubular type
| |
|
Density Tester We offer smoke density tester that determines the density of smoke during burning or decomposition of plastics. It measures the relative amount of smoke obscuration produced by burning or decomposition of plastic and also determines the smoke producing characteristics of plastic under regulated combustion or decomposition conditions. We also observe the loss of light transmission through a collected volume of smoke that is produced under restricted and standardized conditions. Features:
- Works as per the standards of ASTM D-2843
- Provided with a digital electronic photometer with a 0 to 100 % absorbance scale and electronic timer.Machine can be directly connected to a printer to get a graph of absorption or V/S Time
- SDR is calculated directly on the print out of the test.
- Memory to store 6 tests readings.
| |
|
Drop Tester We design and manufacture a wide range of drop tester that is used in diverse industrial applications across the world.
Features:
- Motorised/Manual models available where the drop height& weight of object is less.
- Digital display of drop height.
- Auto stop at the programend drop height for continuous testing.
- Top and bottom safety switches provided.
- Easy locking of drop platform.
Attachments:
- Corner and Edge Drop Fixture
- Digital Instrumentation
| |
|
Environment Tester Our range of tester includes environmental stress cracking tester that is available as per ASTM-D 1693. This is suitable for measurement of susceptibility of ethylene plastics to environmental stress cracking during various conditions. For this bent specimen of plastics with regulated imperfections on its surface are subjected to come in contact with the actions of surface active agent, oils or detergent. At a given time the proportion of total number of specimen that cracks is evaluated. Specification:
- Inside bath is of S. S. and outside bath in M. S. with heat insulation.
- The heating system is having a RTD, Heater and Digital Temp. Controller ( PID )
- Max. Temperature 1500C
- Resolution 0.10 0C
- Accuracy = 0.50 0C
Accessories:
- Blanking Die
- Nicking Jig
- Bending cum transferring device
- Specimen Holder
- Test Tubes
- Corks
| |
|
Gas Tester Halogen acid gas tester provided by us is used to measure the amount of halogen acid gas and hydrofluoric acid circulated during the burning of compounds. The compounds are those based on halogenated polymers and compounds containing halogenated additives taken from cable insulation and outer sheath.The instrument is manufactured as per IS 10810 part & also as par IEC-754 part 1&2 Attachments:
- Tube Furnace with Digital Temperature Controller up to 1200 Degree
- Quartz Tube, Quartz Boat, Flow Meter
- 3 nos. of Wash Bottles
| |
|
Impact Tester We provide Izod and Charpy impact tester that is used to test rubber and plastic material as per ASTM D-256 standards. It checks the ability of plastics and electrical insulating materials to withstand breakage by flexural shock. This is indicated by energy extracted from standardized pendulum type hammers that are generally mounted on standardized machines that breaks standard specimens with pendulum swing. This energy that is absorbed per unit of specimen width is measured in joules. Specification:
- Fully digital display ( LCD ) of angle and energy in joules
- Selector switch for changing range
- Easy to interchange impact hammers
- Max. Available energy - 21.68 Joules
- Ranges - 0-2.71 J 0-5.42 J
0-10.84 J 0-21.68 J
Optional Attachments:
- Dimension feeding facility to calculate Joules / cm2 or Joules / m or PSI
- Torque wrench
- Charpy hammers
- Notch cutter (Manual)
- Notch cutter (Motorized)
| |
|
Melt Flow Index Tester The melt flow index tester provided by us is used to measure rate of extrusion of molten resins. This test is conducted with the help of a die of specified length and diameter and set conditions are maintained in terms of temperature, load and piston position. The test conform to ASTM D 1238 - 95 standards. It is provided with digital stop watch, temperature controller (PID), piston, orifice remover, barrel cleaner, orifice cleaner, scoop and combined weight of 2.16 Kgs. and 5.0 Kgs. Specification:
- Max. Temp. Ambient to 300°C
- Resolution : 0.10°C, Accuracy : 0.20°C
- Timer 0-99.9 min.
| |
|
Oxygen Tester Our range of oxygen index tester performs tests as per the ASTM D-2863 standards. In this method of testing the minimum concentration of oxygen in a flowing mixture of oxygen and nitrogen is measured that just amounts to support flaming combustion. For oxygen and nitrogen measurement besides rotameter, our oxygen meter can also specify direct oxygen percentage digitally in the oxygen and nitrogen mixture. We provide heater, temperature controller and sensor for doing temperature index. Features:
- Suitable for polymers, cables, textiles, rubber and allied material
- Available to do test at ambient temperature and also at higher temperature to carry out temperature index.
| |
|
Universal Material Testing System Our range of hand-operated material testing apparatus is widely used for testing compressive load capacition of various object mainly springs.The machine hasdigital display of load and displacement.The machine can be used to tensile properties of the object with suitable clamps.
| |
|
Universal Tensile Testing Machine It is electro mechanical machine with digital display of load and displacement and pulley belt system for changing speeds, the machines are designed for testing various materials with suitable grips and fixtures.
Specification:
MODEL NO.
|
SET-S 1000 N SET- S 5000 N SET- S 10 KN
|
Max. Capacity (N)
|
1000
|
5000
|
10000
|
Load Resolution (N) 1: 10,000
|
0.1
|
0.5
|
1.0
|
Max. Crosshead displacement without grips/fixtures (mm)
|
900
|
900
|
900
|
Displacement Res. (mm)
|
0.2
|
0.2
|
0.2
|
Test Speeds (mm/min)
|
50, 100, 250, 500
|
50, 100, 250, 500
|
30, 50, 100
|
Machine Dimensions mm (WxDxH)
|
650 x 500 x 1800
|
650 x 500 x 1800
|
650 x 500 x 1800
|
Power Requirment
|
| |
|
VICAT Tester We provide VICAT, HDT tester that are used to test temperature. Our range of Vicat Softening Temp conform to ASTM D1525 and helps in determining the temperature at which a standard indenter penetrates 1mm into the surface of a plastic test specimen under one of the loads. This test is conducted under specific uniform rate of heating.
- Rate of rise of temp.50 degree C / per hr.or 120??C/hr
The HDT apparatus tests deflection temperature of plastic under flexural load and the test is conducted as per ASTM D-648. This tester evaluates the temperature at which an arbitrary deformation transpires when plastics are subjected to arbitrary bending loads and constantly rising temperature conditions.
- Rate of rise of temp. degree C / per min.
| |
|
|
