Sharadatronic Instruments
Sharadatronic Instruments




Home

Know Us

Our Product Range

Contact Us

Home » Our Product Range » Electrical Testing Equipment


Electrical Testing Equipment

We are offering wide range of Electrical Testing Equipment. These machines are durable and easy to use. These testing machines yield accurate results and can function non stop for hours. Capable of withstanding high pressure, these cement, concrete and soil testing machines are largely used by clients in the construction industry.

Life Test Racks


Life Test Racks

Item Code: MH-HPSV-Lamps

We manufacture, supply and export the best quality Life Test Racks that are manufactured from the high quality material and are highly appreciated by our esteemed clients.

Features:

  • High Quality
  • Reliable
  • Pocket Friendly Prices.





Switching Cycles

Item Code: Test-Rack

We manufacture, supply and export the best quality Switching Cycles.

Applications:

  • For testing Life performance of CFL. LED lighting products during fast ON and OFF switching cycles under high voltage and low voltage

System Features & Technical Data:

  • Fast ON and OFF time switching cycles in seconds which are adjustable as per the requirement
  • Holders are divided in different channels and can be rotated to check the CFLs horizontally if required
  • Failure of individual lamp can be recorded in the counter
  • Digital counters with battery back up to record the total No. of ON and OFF cycles the individual lamp has undergone during the test.
  • Optical sensors to identify the status of individual lamps
  • Voltage can be increased up to 400 V either to all the holders or selected channels as per the requirement
  • Voltmeter, time totalizator (Hour meter), dual cyclic timer along with contractors and other necessary switches and controls and auto transformers to set the required test voltage.
  • Any number of lamps can be tested as per the requirement
.
For further details and specifications etc please contact through email.



Switching Cycles




Life Test Racks


Life Test Racks

Item Code: Computerized

We manufacture, supply and export the best quality Life Test Racks that are manufactured using the best quality material.

 

Application:

 

  • Automated test set-up for performing Life test and Aging test on CFL, T8/ T12/ T5 TFL, HPSV/ MH lamps and other light sources

System Features & Technical Data:

  • Life Test Panels are controlled through a micro-controller  based controller unit (CU) to perform all the necessary operations as per the requirement to do an unattended life test on each of the individual/batches of lamps
  • All the results are passed to PC from microprocessor through a communication link for which an advanced software/system running on Windows/ XP platform provides a user friendly graphical user interface to observe, monitor, program and report various test parameters
  • Software maintained real time clock synchronized from PC
  • PC command based bank-wise ON/ OFF control with programmable set-up ON/ OFF condition of each lamp monitored individually using externally mounted optical sensors and periodic reporting of lamp status to PC
  • Records the date and time of failure of a lamp individually along with elapsed time, total burning time etc
  • All holders used are specially made Bakelite moulded with phosphorous bronze contact strips with earthing facility
  • The panel is covered with CRCA Sheet and provided with meshed doors. In the front side necessary switches and control gears are provided. All wiring in the test rack are suitably concealed which are heat resistant FRP or Teflon cables
  • The panel/ system can be designed for the life testing of any number of lamps as per the requirement
  • Manufactured confirming to IEC, BSS and IS specification

For further details and specifications please contact us through email.





Life Test Racks

Item Code: 1

We manufacture, supply and export the best quality Life Test Racks.

Applications:

  • Life test and Aging test for CFLs of all wattage and other light sources

System Features/ Technical Data:

  • All holders used are specially made bakelite moulded with phosphorous bronze contact strips with earthing facility
  • This life test rack is suitable to test self ballasted CFL and also PLL (through magnetic ballast) with provision to test any number of lamps as per the requirement
  • Incorporates voltmeter, ammeter, time totalizer (Hour meter), cyclic timer along with contactors and other necessary switches & controls
  • Auto-transformers with other controls to set the required test voltage to each lamp bank
  • Manufactured confirming to IEC, BSS and IS specification.



Life Test Racks




Life Test Racks


Life Test Racks

Item Code: T5-TFL

We manufacture, supply and export the best quality Life Test Racks that are manufactured from quality material. Further these Life Test Racks are meticulously tested on different quality parameters to ensure longer service life and optimum functionality. Our clients can also avail this rack from us on Industrial Leading Prices.

Features:

  • Reliable
  • Quality approved
  • Provides comprehensive support.





Glow Wire Test Apparatus

We manufacture, supply and export the best quality Glow Wire Test Apparatus.

Applications:

  • Resistance to flame and ignition test on insulating material such as CFI outer insulating material, HID lamp cap insulating parts etc

System Features/ Technical Data: 

  • The heating element is made of Nickel/ Chromium (80:20) wire, 4 mm in diameter
  • The temperature sensor is made of a sheathed fine wire of Cr/ A1 thermocouple resistant to a temperature of 1000 C
  • Self adjusting current source is used to heat the Glow-wire up to preset temperature
  • A microprocessor based PID temperature controller is used to control temp of glow wire. (Range: Ambient to 960C, Resolution: 1°C Accuracy: 1% Display: 4 Digit Red LED)
  • Microprocessor based digital timer is used for pre-setting the test duration (Range: 0.1 999scc) with audio alarm to remove the test sample from the glow wire tip
  • Digital time interval meter to record the burning time of the sample
  • Glow wire penetration into the sample can be limited mechanically
  • Provision to press the sample towards the glow wire tip with a force of 1 Newton
  • In Auto models motorized forward and reverse motion for the movement of specimen with additional manual jog switches
  • Automatic start of the test and draw back of the sample after the pre-set test time with a single press button
  • Manufactured confirming to IEC, BSS and IS specification.



Glow Wire Test Apparatus




High Voltage Test Equipment


High Voltage Test Equipment

We manufacture, supply and export the best quality High Voltage Test Equipment.

Applications:


  • Suitable to check the electric strength on CFLs, chokes/ballasts, luminaries etc

System Features/ Technical Data:

  • Specially designed, consisting of a step up transformer along with an auto transformer to get the High Voltage which is taken out through a high voltage test probe
  • Preset timer to set the different test time as per the requirement
  • Voltmeter to measure test voltage and a mili ammeter to measure leakage current
  • Audio and visual indicators for HV ON/ OFF, test pass/ fail and for breakdown
  • Range: upto 10 KV available in AC and DC version or both
  • Manufactured confirming to IEC, BSS and IS Specification.





Reference Ballasts

We manufacture, supply and export the best quality Reference Ballasts.

Applications:

  • To evaluate the performance and starting characteristics of discharge lamps and also to select reference lamps

System Features/ Technical Data:

  • Specially designed confirming to stringent performance requirements and having stable & repeatable characteristics
  • Helpful in evaluating performance of magnetic and electronic ballasts in comparative studies
  • Available for various gas discharge lamps such as CFL/ PLL, TFL, HPSV, HPM V and MH lamps.



Reference Ballasts




Vacuum Exhaust Systems


Vacuum Exhaust Systems

Item Code: HID-Lamps

We manufacture, supply and export the best quality Vacuum Exhaust Systems.

Applications:

  • To evacuate the glass shell during the manufacturing process of HID lamps

Features:

  • 6 inch diffusion pump of 1600 Its/ sec. capacity for high vacuum exhaust
  • 1000 Its/ min rotary high vacuum pump for roughing
  •  600 Its/ min. rotary high vacuum pump for backing
  • Two sets of SS manifolds with water cooling jackets for alternate evacuation on either side of the common system and provision to admit air or nitrogen
  • Chavverron baffle valve, high vacuum color, isolation valves, roughing valves, butterfly valves, pirani and penning gauges with electrical control panel
  • Suitable for both elliptical and tubular HID lamps of different wattage
  • Ultimate vacuum in the range of 10-5 m bar
  • Supplied along with heating oven with stand insulated with ceramic blankets, temperature indicator and LPG burner etc
  • Supplied along with lamp lighting movable rack fitted with different chokes, ignitions and other switches & controls
  • Both semi-automatic and manual systems available.





Electrical Test Panels

Item Code: Ballast-Luminaires

We manufacture, supply and export the best quality Electrical Test Panels.

Application:

  • To measure electrical parameters of electronic and magnetic ballast/ chokes, luminaries etc.

Features:

  • Consists of power meter WT210/ WT230 (Yokogawa), Auto transformer, cyclic timer, preset timer, event counter etc
  • Power meter measures supply voltage-current power-frequency-power factor, V harmonics, I harmonics, TIM etc
  • Also measures ballast voltage, open circuit voltage, cathode current, impedance, output frequency of electronic choke etc
  • Testing can be done both in AC and DC voltages.
  • Auto transformers for output fine tuning of supply voltage.



Electrical Test Panels




Light Testing Equipments

We manufacture, supply and export best quality Light Testing Equipment. This range is highly appreciated for catering high end performance and supreme functionality. Farther our range is highly demanded for its exclusive features.









Digital OHM Meters

Digital OHM Meters


Glow Wire Test Apparatus

Glow Wire Test Apparatus






Tumbling Barrel Apparatus

Tumbling Barrel Apparatus


Go And NO-GO Guages

Go And NO-GO Guages








LED Light Testing Equipment

LED Light Testing Equipment










Contact Us
Sharadatronic Instruments
Mr. U. K. Bhat (Proprietor)
No. 8, Site No. 45, Hanumantha Nagar, Srigandakavalu Sunkadakatte
Bengaluru - 560091, Karnataka, India

Contact via E-mail



Home  |  Know Us  |  Our Product Range  |  Site Navigation  |  Contact Us

Member IndiaMART.com © Sharadatronic Instruments. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Contact Us

*Describe Your Requirements in Detail
Remaining Characters: 3500
Your Contact Information
Your Contact Information
*Name:
*Email:
Company:
Website:
*Country:

City:
*Mobile:
*Enter the code: