We offer relay test sets to our clients that is useful for testing of single phase protection equipment for under and over voltage, current leakage, over current, distance and directional relays and also for conducting ratio tests for PT's and CT's and plotting the excitation curves.

These sets comprised of components like auto variable transformers, loading current transformer, automatic cut-off, contractor, capacitor & resistors for phase shifting, operating switches and meters for output parameters and an electronic time interval meter, fitted compactly in a sturdy FRP (Fiber Reinforced Plastic) cabinet or 20” VIP suitcase. The current and voltage outputs of these sets are variable and is automatically cut off on the activation of relay under test. They are provided with different terminals for relay connections and range of output voltage and current. The control panel of these sets are provided with variac knobs, indicators, toggle & push switches, voltmeter and ammeter and timer.

Technical Specifications

• Input: Single phase, 240 V±10%, 50 Hz.
• Output: Main - 0 – 250 V/2 max AC/DC Auxiliary-0–250 A/1.5 max AC/DC
• Metering: Ammeter – Digital, AC RMS, 3.5 dig., Accuracy - ±1%, Voltmeter – Digital, AC/DC RMS, 3.5 dig., Accuracy - ± 1%, Time Interval Meter – Digital, Programmable, Range - 0.0001 to 9999 Sec., Accuracy - ± 0.05%
• Dimensions/Weight: 18" x 12" x 8" (approx)/30 Kgs. (approx)for FRP case.

We manufacture and export a diverse range of oil test sets for our clients across the global markets. These quality approved instruments are used for testing the dielectric strength of the insulating liquids of a high tension transformer. These insulating liquids must possess a high dielectric strength. Their dielectric strength is measured by passing a very high voltage through them. If the insulating liquid fails in the test the device will show a spark between its two electrodes. We manufacture these oil test sets in different models and voltage ranges conforming to the quality standards like IEC-156 and IS: 6792/1972. Our oil test sets consist of different parts like H.T. transformer and oil test cell (with electrodes & gauge), control panel, fitted in a sheet-metal cabinet with an acrylic covered housing for the oil test cell.

The control panel is fitted with the high quality operating components like, mains, HT and on & off switches, voltmeter, green and red pilot lamps for Mains On and HT On indication, fuse, 1.5 meter cable for mains connection. The HT transformer of these sets are compactly designed for efficient operation in various conditions.

Features

• Cover and zero start interlock
• Varying output from 60 KV or 100 KV
• Portable
• Compact
• Complying with quality standards like IS: 6792 and IEC-156
• Overload and shock protection

Technical Specifications

• Input: Single phase A.C., 240 Volts + 10% 50 Hz.or as designed.
• Output: Variable output from 60 KV or 100 KV
• Models: Manual or motorized
• Capacity: 600/1000 VA
• Dimensions/Weight: 60 KV, 375x450x375 mm. approx. /35 kgs. Approx 80 or 100 KV: 470x550x430 mm. approx. /65 kgs. approx.

We specialize in manufacturing automatic oil BDV test sets conforming to the international quality standards like IEC-156, IS-6792 etc. These instruments are designed by our highly qualified engineers for accurately testing dielectric strength of insulating liquids present in the circuit breakers and transformers. We have equipped our test sets with a micro-processor controller, motorized variac, a printer and HV transformer, housed in M.S and FRP cabinet. The control panel of the test set is provided with all the essential controlling switches necessary for easily operating these instruments. The LCD display of these test sets shows the results and information in alphanumeric characters. The printer fitted to these test sets is a standard 24 col. printer. Features

• Variable output up to 100 KV
• Compact and portable design
• Equipped with cover and zero start interlocking device
• Compliance with quality standards like IS: 6792 and IEC-156
• Shock proof
• Overload protection

Technical Specifications

• Input: 230 Volts, 50 Hz, Accuracy /- 10%
• Output: Variable from 0 - 100 KV
• Capacity: 1.0 KVA.
• Duty Cycle: Continuous
• Dimensions/Weight: 21” x 18” x 17” approx. /75 kgs. approx.

Suitable Parameters:

• No. of tests: 1-99
• No. of test per sets: 1-9
• Initial stand time: 1-999 sec
• Stir time: 1-999 sec
• Intermediable stand time: 1-999 sec
• Rate of voltage rise: 0.5 sec to 5 sec

We design and develop a superlative range of DC high voltage test sets that are designed for testing various high voltage electrical equipment like cable fittings, 11 KV and 33 KV cables and switch gears. Our cutting edge instruments are also used by many of our clients in their high voltage installations for testing purposes. The tests are initiated by first supplying the desired voltage and then checking the leakage of current. These leakages are indicated by the meters of these instruments. The indications calculate the insulation resistance and dielectric strength of the devices and equipment that are being tested with these instruments. These test sets are compact and housed in a sheet metal box.

Features

• Variable DC output 0-10 / 15/30/60 KV
• Automatic tripping at preset voltage & current
• 10 meter long shielded HV output lead (up to 30kv)
• Compact and portable
• Earth connection and zero start interlock
• Available in dimensions of 400 X 265 X 300 mm approx (up to 30kv)
• Weigh around 25 Kgs. (up to 30kv)

Sakova AC high voltage test sets are designed for testing various electrical equipment and consist of a double wound HV transformer with the high tension end is brought down and ended on a spring loaded rod for testing up to the rating of 5 KV. The last end of the high tension winding is also brought down, through intermediate circuitry and is ended on the earth connection. If the current in the under test equipment increases above the prescribed value, the intermediate circuitry allows for the tripping the supply to the high tension transformer. We have equipped it with the provision of a zero start interlock switch and variac which allows the slow application of high voltage to the test specimen.

We have provided these instruments with the indicating lamps on the control panels that for indication of Mains on and H.T. on. It is also provided with a voltmeter to effectively indicate the high output voltage. If at a point of time, the system under test system faces the failure the power supply to the voltmeter is not interrupted whereas the power supply to the HV transformer is instantly switched off. We offer these testers of 10 KV rating housed in a single sheet metal covering while those above this rating consist of HV transformer and a control unit that is made from the sheet metal itself. We manufacture them up to the output range of 60KV.

Features

• Zero Start Interlock switch
• Different AC outputs up to 60 KV
• Tests leads for ranges up to 5 KV
• Automatic tripping
• For output voltages above 10 KV, separate control and transformer units

A primary injection set is offered by us within our range of high grade electric testing instruments. The injection set is a high current supplying unit. Built with a stringent attention to the clients requirements of high quality, flexible usage and performance, our test sets are modular, accurately and compactly designed. Our range of primary injection sets PIS-1000 and PIS-600XT are housed with an accurate ammeter and comprises of one or two compact units, that is current and control units along with suitable metering and terminals accommodated within painted and powder coated M.S. cabinets. These primary injection sets meet the requirements of easy mobility through their capability of mounting upon the trolleys provided along with these sets.

Features

• Overload protection
• Output: 0-1000 amp or more, as desired.
• Variable current for commissioning tests

Technical Specifications

• Model: P/S-100
• Input Voltage: 230 Volts + 10%, 50 Hz
• Output Current: 0-500/1000 Amps AC, Continuously variable
• Load Capacity: 5 KVA
• Timer: Digital, Auto-ranging, 4 dig, Accuracy – 0.05% + 1 LED display.
• Dimensions/Weight: Current/control unit.1.6"*15"*12" approx/30 Kgs, approx.
• Model: D/S: 600
• Input voltage: 230v+-10 to 50.
• Output Current: 0-600A
• Ammeter: Digital, 31/2 dig., Range: 0-600 A, Accuracy + 1.0% LED Display
• Timer(Optional): Auto ranging, 4dig, Accuracy: 0.05%
• Duty Cycle: Depending on current for 600A 20sec ti 6 minutes for 100A.

The circuit breaker timer is high tech testing instrument that we offer to our national and international clientele. It is a very compact and portable instrument. It consists of three programmable time interval meters with necessary terminals, indicators, and switches housed in an aluminium and a wooden box laminated with mica sheet. Two terminals for the power supply to the terminal of trip/close coils. Also three pairs of terminals are provided for contact to relays or circuit breakers. The timer operates on an an input voltage of 230 V AC. The time interval meters of this device records the trip/close timing of each of the contacts automatically and possess a memory retention of 10 years.

Technical Specifications

• T.I Meter: Auto ranging (programmable), 4 digit
• Range: 0.0001 to 9999 Sec.
• Accuracy: +/- 0.5%
• Dimensions: 13" x 9" x 6" approx.

The most simple and common cause of the electric break down is the failure of insulation. It needs a regular testing for uncovering the weaknesses of insulation before any serious damage happens. These testers are used for testing the insulation of power distribution lines, electrical rotating machines, insulators, control and switching equipment, communication cables etc. These instruments are sturdily designed and equipped with a hand driven generator and a solid state circuit for stabilizing the DC output. These insulation testers shows and measures the ratings and shows it on a logarithmic scale. We have made these testers to comply with the Indian quality standards like IS: 2992-1980.

Features

• Direct Reading
• Readings independent of speed of rotation.
• Equipped with an infinity adjusting device.
• Sturdy and long lasting design
• Complying with the ISS & ITD specifications
• Prompt response

Technical Specifications

• Measuring Voltages: 100V, 250 V, 500 V, 1000V, 2500V or 5000V
• Insulation Ranges: Up to 20,000 Meg ohms
• Handle speed: 160 RPM or above
• Accuracy: As per the IS: 2992-1980 standard
• Scale Length: Logarithmic Scale approx. 90 mm long.
• Dimensions: 220 x 120 x 130 mm approx. (Metal case)
• Weight: 2.3 kgs. Approx.(Metal case)
• Casing: Aluminium casted or Mica Laminated body

A well planned and effective earthing of electrical equipment is essential for the safety of electrical establishments and their operational excellence. The efficient operation of an electrical plant, sub-station and factories depends upon the earthing electrode resistance. So, we offer well designed instruments called earth testers carrying the vital responsibility of maintaining the earthing resistance at a lower value and within the prescribed maximum limits.

The earth testers we offer are sturdy and portable, easy in usage and highly durable. Our earth testers are applied for measurement of earth-resistivity which is the easiest way of planning out the locations that are best suited for installing the earthing electrodes which are to be used for geophysical surveying and investigating the setbacks concerned with the soil like corrosion etc. These earth testers are also applied for the accurate measurement of the prevailing earthing electrodes and maintaining electrical connections from transformer cases, sheaths and frames. We also offer these instruments according to the requirements of our clients.

Features

• Inherent Accuracy
• Sturdy Construction
• Durable
• Easy In Operating
• Conforming to the highest industry standards like ISS & ITD

Technical Specifications

• Range: From 0-5 ohms to 0-10,000 ohms
• Scale Dimension: 90 mm approx.
• Accuracy: In accordance with IS: 9223-1979.
• Casing: Enameled aluminum casting
• Dimensions/Weight: 220 x 120 x 130 mm approx/2.3 Kgs. approx.
• Models: Three and four terminals

The contact resistance meters we offer in the market are used for effective and accurate measurement of the resistance of male-female contacts of isolators, GTS breaker contacts, bus bar joints and SF-6 breaker contacts. It is done by applying a variable DC current ranging from 0–100 amperes and measurement of the voltage drop along their contacts. We have housed it in an unbreakable body made from FRP (Fiber Reinforced Plastic) within MS fabricated box for easy transportation to prevent it from any kind of damage. The ammeter and millivoltmeter (Micro-ohmmeter) measures the current flowing in the contacts of the electrical equipment. A variac incorporated to adjust the output current from 0 – 100 ampere.

Features

• Variable output from 0 - 100 Amps
• Metering of current and mv drop
• Portable design
• Inherently durable and sturdy

Technical Specifications

• Range: 0.1 micro-ohm to 19999 micro-ohm
• Input: 240 V ±10%
• Output: Variable 0-100 Amps., DC
• Metering: Digital Ammeter, 3 1/2 digit digital millivoltmeter 4 1/2 digit
• Dimensions: Meter - 18" x 12" x 7" approx housing – 20” x 14” x 9” approx.
• Weight: 25 to 30 kgs. approx.