We offer high performance Double Girder EOT Cranes that are mainly used for heavier loads and longer spans. They have low headroom and can be lifted up between the girders. These cranes are manufactured as per the ISO: 807, 3177 standards. All our Double Girder EOT Cranes are available in the in the capacities of 50 tons and spans up to 30 meters as standard. These cranes are also available in hand operated traveling (Hot) crane version. Features:

• Capacity: 0.5 to 50 tons
• Span: 5 to 40 meter
• Lift: 6 meter standard
• Sliding pushbutton station
• Manual fused disconnect switch
• Thermal overload protection on all motors
• Two speed control for all motions

We manufacture high precision Single Girder EOT Crane that is available in both top running and under running designs. Due to low dead weight these cranes are a cost-effective solution for material handling. Our crane provides greater floor coverage than any other cranes. The wire rope hoist of our crane travels on the bottom flange of the girder and control is floor operated through push button pendant. All our cranes conforms to ISO:807, 3177 and are available in the capacity ranging up to 20 tons and spans up to 30 meters as standard. These cranes are also available in hand operated traveling (Hot) crane version. Features:

• Capacity: 0.5 to 50 tons.
• Span: 5 to 40 meter.
• Lift: 6 meter standard.
• Low dead weight: Ensures reduced cost of supporting steel work.
• Standard Components: Ready availability of spare parts from stock.
• Wide selection of operating speeds.

SHASHWAT Gantry / Goliath Cranes are both durable and portable and are available in a variety of styles with capacities ranging from 1 to 30 tons and spans from 3 to 20 Mtrs., and heights from 3 to 15 Mtrs. Gantry Cranes are less expensive than overhead cranes and easier to assemble, making them ideal for construction sites, warehouses, loading docks, vehicle maintenance etc. Some options are Full Gantry, Semi Gantry, Manual Gantry etc. Features:

• Capacity: 0.5 to 30 tons.
• Span: 6 to 25 meter.
• Lift: 6 meter standard.
• Also available in either fixed or adjustable height models.

The SHASHWAT name on the Jib crane stands for superior quality product. They are an important part of any material handling system. They help reduce labor cost by avoiding the time lost on waiting for an overhead crane or forklift. A Jib crane can be easily handled by one person and is very cost-effective. By combining lightweight construction techniques we have developed a Jib crane that is not only lightweight but produces minimum amount of friction thus reducing operator fatigue and wear and tear. Features:

• Capacity: 0.5 to 10 tons
• ARM - Length: 5 meter
• Lift: 6 meter standard
• Swivel: 0 to 360 degree

We manufacture Goods Cage Lift that is suitable for any kind of material handling. These Goods Cage Lifts are specially designed for scale lifting of the material from one floor to another at different levels. All our Goods Cage Lift are designed to meet clients' specific requirements and can be designed with or without collapsible shutter. These cages are being guided by a hoist and are available with properly interlocked push buttons with limit switches for safety. Features:

• Capacity: 0.5 to 50 tons
• Cage: 3 mtr. x 3 mtr. x 3 mtr.
• Lift: As per required
• Floor: Ground 10

SHASHWAT Chain pulley blocks (Hand chain Hoists) are available up to 20 Ton capacity. Gears are balances spur type & load chains are of Grade 80. The brake is of automatic type whereby the pressure and sustaining power increase in proportion to the load being lifted. Friction plates are of material, which will not affected by humid atmosphere. Hanging options are Fix suspension, Push-Pull trolley, Geared traveling trolley, Electric Trolley etc. Features:

• Capacity: 0.5 to 30 tons

Hoists Crab are an essential part of material handling industry and effectively serve the purpose of lifting and shifting loads in areas where it is not possible / necessary to install cranes. We manufacture hoists as per ISO: 3938. It is generally used where a load has to travel through a pre-defined path or only a lifting/lowering function is required. Further the hoists are used for relatively smaller capacities; say up to 15 Ton or so. Hanging options are Fix suspension, Push-Pull trolley, Geared traveling trolley, Electric Trolley etc. Features:

• Capacity: 0.5 to 15 tons
• Lift: 6 meter standard

We offer Three Phase A.C. Electric Motors are with ISI marked, conforming to ISO: 325/1996 with International Standards. All our products are fully tested before dispatch, in accordance with relevant standard of specification on highly précised Water Brake Dynamometer, connected with 0.5% accuracy class meters. The results are directly feed to the computer for obtaining various test results, test certificates & graphs. Range:

• HP / KW : 0.25 HP / 0.18 KW to 40 HP / 30 KW
• Frame Size : 63 to 200L
• Syn. RPM : 3000, 1500, 1000, 750
• Duty : S1, S2, S3 up to S8
• Enclosure : TEFC
• Protection : IP54, IP55

Applications: Pumps, Hoists, Chemical plants, Blowers, Cranes, Machine tools, Compressors, Cold storage, Plastic molding machinery, Lifts, Cement plants, Food processing machinery, Flour mills, Refrigeration & Air conditioning, Paper mills, Industries.

Single Phase A.C. Electric Motors are backed by the design and manufacturing skills acquired by the company through its long experience in this line.

Range:

• HP/KW : 0.25 HP / 0.18 KW to 3 HP / 2.2 KW
• Frame Size : B56, 100, 112, 132
• Syn. RPM : 3000, 1500 • Duty : S1
• Enclosure : SPDP, TEFC
• Insulation : B, E, F

Applications: Atta chakkis, Domestic pumps, Machine tools, Surgical / Vaccum pumps, Diamond polishers, Air blowers.

We offer Electric Wire Rope Hoists that are known for their trouble free performance and are sturdy in design. These Electric Wire Rope Hoists are available with fix suspension, with geared trolley and with power trolley. Our entire Electric Wire Rope Hoist can be designed as per client specific requirement. We follow ISO Specification. Features:

• Capacity: 0.5 to 30 tons


• Radius: Min. 2 mtr. up to max


• Lift: 6 meter standard

We offer Electromagnetic Disc Brake for safety for your process & profitability. In case of power failure in machines like Hoists, Cranes, Winches, Elevators, etc. application of Brake is a must. We offer AC type brakes, called fail safe brake, as in case of power failure, these brakes apply mechanically. Features:

• Nylon/Bakelite bobbin with ‘F’ Class insulation coil
• M.S. Plate for liner
• 16.5 mm thick liner
• 10 mm thick E plate / I plate
• 15 mm thickness of mounting plate
• C.R.N.G.O. Stamping
• Close type connector with nylon nut
• Heavy Duty Brake

Applications: Machine tools, Hydro Extractors, Coil Winding Machines, Rubber Mixing Mills, Rolling Mills, Industries such as a Cement, Mining, Sugar, Textile, Material Handling etc.