The double cone vacuum dryers we offer are fabricated using premium grade raw material and are acknowledged for their host of qualitative features. These precision engineered double cone vacuum dryers are available in various technical specifications and can be customized as specified by the clients. Following are the specifications:

• Standard Models: From 100Ltrs to 10000Ltrs
• Features: Standard / cGMP models available, suitable size condensers & receivers for solvent collection
• Working Volume: 50% to 60%
• Heating: Hot Water or Oil.
  

 

Our assortment of precision engineered vacuum tray dryers has gained tremendous accolades for their high performance and reliability. We offer these dryers in different features. It has circular and rectangular drying systems along with a vaccum pump system provided to match cusom requirements.
Vacuum tray dryer is made up of stainless steel, with mild steel externals.

Merits

• Sturdy welded external chamber reinforcement ensures maximum operating protection and dependability under full vaccum operation
• Hollow pad type heating shelves baffled for essential heat transfer.
• All shelf to manifold connectors are located outside the dryer chamber to preclude product contamination.
• Validation ports and nitrogen purge nozzles provided.
• Fluid heating and circulating systems either steam or electrically heated, with PLC based process control possible.
• Vapor condensation unit along with receiver to accomplish solvent recovery.
• Vaccum pump system provided to match cusom requirements.
• Circular and rectangular drying systems ideal for small to moderate levels of production.
• Load cell system integration for lab models.
• cGMP construction for Special Pharmaceutical Models.

MOC

• All stainless steel , hastelloy, contacts, vapour parts stainless steel with mild steel externals.
• All process contacts surface finished with corrosion resistant plastic coatings such as Telfon, Halar etc.

Trays

• Tray size: 16" x 32" x 1..25" Ht
• Tray Volume : 10.45 Litres

 

Our comprehensive range of industrial multi mill is appreciated for their qualitative features. These are fabricated with quality proven raw material procured from reliable vendors. The entire range is available in the following specifications:

• Standard Models: From 1H.P. to 5H.P.
• Features: Standard/cGMP Models available
• Output: 50kg-200kg/hr depending on product & reduction size required (For 3 H.P.)

Further, we also have the ability to customize our range as specified by the clients.

Technical Specifications:

Output	50-200 kg/hr depending on product & reduction size required
Motor	3 hp/ tefc/ 1440 rpm /440 v/ 50 hz / 3 ph /AC
Perforated Screen Hole Dia	0.25-12mm
SS wire mesh sieve	As per requirement
rotor speed	750/ 1500/2000/3000 rpm
Beaters	12 nos with knife mpact edges & 2 scrapper Blades
Screen Dimensions	260mm dia x 140
Discharging Height	1500 mm
Overall Dimensions	850 x 1000 x 1700 (h) mm

Our range of Octagonal blenders are commonly used in diffferent pharma industries. Octagonal blenders is made up of stainless steel. Its charging and discharging is through a butterfly valve and all its moving parts rae moving parts are enclosed in guards. To operate safety a safety railing is provided  with a limit switch. Some of its salient features includes:

• Contact parts in stainless steel AISI SS 304 or 316
• Octagonal shaped with rectangular center, conical discharge frustum and rectangular top frustum
• Baffles provided in the shell
• Manhole with gasket is provided to fix baffles and for ease of cleaning the shell
• Charging and discharging is through a butterfly valve
• A conical adaptor can be provided for fixing charging drum after butterfly valve
• Unit can be provided with bin charging arrangement
• All moving parts are enclosed in guards.
• A safety railing with a limit switch is provided for operator safety
• Manual Inching arrangement can be provided
• Flame - proof motors / Limit switches with flame - proof push button stations can be provided
• Available Models from 5 Litres to 5000 Litres 
  

We fabricate a wide range of reaction vessels, industrial heat exchangers, receivers and others that are designed and developed using stainless steel, mild steel MOC sourced from reliable vendors. The equipment has gained huge appreciation for their high performance and durability. The technical specifications of steel heat exchangers are as follows:

• Standard Models: Available in 50 Ltrs. to 20 kl.
• Features: Sturdy construction in MS /SS & as per GMP Norms under ASME code

We also undertake turnkey project for erecting plants & equipments for chemical, pharma drugs & allied industries. Moreover we also offer autoclave pressure vessel, storage tank, nutsche filters, agitators and other fabricators designed as detailed by the customer.