We are engaged in the development and export of finest quality flywheel assembly which is suitable for high speed rolling mills. To detect any cracks in the product, ultra sound testing is done on it. The efficient flywheel assembly has the following salient features:

• Dynamically & statically balanced


• Forged Steel EN-8 fully machined Shaft


• Heavy Duty Plumber blocks


• Spherical roller bearings

• Available Heavy Weight Flywheels 


• Material Constructed will be of Cast Iron\Steel Cast\Steel Fabricated 


• Vibration absorbing Design

• Forged Steel EN-8 fully


• Heavy Duty Plumber blocks with anti friction spherical roller bearings


• M.S. Base plates fully machined with foundation bolts

Our rich technical and engineering expertise allow us to manufacture quality industrial gear boxes, mechanical gear boxes  & pinion stands. The product array is a division of rolling mills parts. It possesses a sturdy steel fabricated body that enables it to bear shocked overload of the mill. The industrial gear boxes are available in single or multi stages. Pinion stands are available in two-hi / three-hi / four-hi. Salient features of the product include following:

• Gear will be hardened & grinded for smooth run.
• Transparent & Heat dissipation window.
• Pray lubrication for gear teeth.
• Double oil seals to protect any leakage.
• Forged Steel EN-8 fully machined shaft.

• Gear will be of forged steel EN-9 / 19 / 24.
• Anti friction Spherical Roller Bearing.
• Forged lubrications.
• Efficiently peak load worked designs.

The heavy duty mill stands and rolling mill stands are manufactured from steel caster / steel fabricated / C.I. caster that are properly machined and accurately fitted. We offer the product in fiber bearing and antifriction bearing type that complete with different pressure bolt and bars. Its salient features include: compact, simple design and precise alignments.

Technical Specifications:

• Available 2 hi / 3 hi / 4 hi
• Open top or close design

• Up to fitting with pressure bolt and rest bars.
• Foundation rails and shoe bolts.
• Chocks and rest bars.

We offer hot & cold shearing machine which is used to cut heavy billet, hot bars, plate scraps, structure as angle & channel, TMT bundle etc. It also includes snap shear to cut hot rolling during brake down / Mis roll. The machine has the following salient features:

• Steel fabricated sturdy cased body.


• Fully hardened EN19 gears.


• Tempered carbon steel cutters.


• C.I. caster flywheels.


• Anti friction bearings.


• Gun metal bush.


• Fully Machine EN8 Shafts


• Lubrication systems.

The straightening machines are used for straightening rolled steel sections such as angle, channels, rounds, beams etc. Salient features of these machines are:

• Made up of steel fabricated M. S. plates of amply thickness.
• Contains sufficient rolls of Adamite containing anti friction roller bearings.
• In built reduction gear box.
• Accurate running of machines.

Rotary shears available with us are used to cut hot rolling front ends and tail end. Having an automatic stop/start, the machine is also used to cut bars into desired length before cooling bed. The machine has a heavy duty steel fabricated housing. Fixed / movable rotary shear is available with us. Punch rolls available with us are used for pushing hot rolled to another train. It is installed between two rolling mill drives and in between two opposite installs shears. It has a housing of steel, its body is steel fabricated and the roll will be of EN-31 standard.

Common Salient features:

• Sturdy cased steel fabricated body.


• Gear will be hardened & grinded for smooth run.


• Transparent & Heat dissipation window.


• Spray lubrication for gear teeth.


• Double oil seals to protect any leakages.


• Forged Steel EN-8 fully machined Shafts.

• Gear will be of forged steel EN-9 / 19 / 24.


• Anti friction Spherical Roller Bearings.


• Forged lubrications.


• Efficiently peak load worked design.

One of the most demanded rolling mill duty parts i.e, bearing chocks are ideal for anti friction roller bearings. This product is installed between the windows of rolling mills stand. Its salient features include:

• Material used: EN ? 8 with Fully Machined bearing chocks.


• Completion: The bearing chocks are fully complete with side covers, sleeves / Lumbering & chick nuts

We offer finest quality Gear Couplings to our clients. These products are used to accommodate the misalignment in between two shafts and dampen the vibrations that are caused by brake down. Salient features of Gear Couplings are:

• Two flagged type sleeves.


• Internal cut out teeths.


• Two outside toothed hubs with side covers.


• One set of nuts-bolts.


• Internal hubs are made from hardened forged materials.


• Outer sleeves are made from EN-9 materials.


• Teeth are tempered in well treatment systems.


• Lubrication holes are well machined.


• Oil seals are provided.


• Single tube sleeves type gear couplings.


• Heavy duty non standards couplings.

Generally used in Wire Rods and TMT Rolling Mill Plants, our guiding equipments are available in customized options, as per specific requirements of our clients. The guide roller boxes are installed in the front of the rolling rolls with the assistance of a holder. Guiding Equipments has the following salient features:

• Guide roller boxes are of stainless steel materials.


• Boxes are fully machined accurately, with central parallel adjustments.


• Steel bolting of rolls made up of high chromium steel.


• Twisted Pipes and spares of these boxes.

We provide Billet Pushers that are also known as Rolling Mill Heavy Duty Pushers. These pushers are generally used to push raw ingot into furnace. These kind of a products are generally installed in the backside of the furnace in a rolling mills. The double stands ejectors available with us are installed in front side of furnace. Its application is to eject hot ingot that is ready for rolling from the furnace.

Mill Rolls available with us are used for pipe & tube mills, steel re-rollings, wire rod rollings and metal forming industries. The product is manufactured by the process of a centrifugal spin castings. For different requirements and applications, alloyed as well as unalloyed chilled cast iron rolls and spherical cast iron rolls are produced. We supply our product - Mill Rolls, as a solid cast or hollow.

Backed by a diligent workforce, we manufacture universal spindles & couplings that are used in bearing type rolling mills. The product is installed in between the two mill stands that are used to couple both stand rolls and run the mill drive from one to another. It is fully machined, with spindles being machined with En-8 material.