beakers, moulded in polypropylene, have excellent clearity and very good chemical resistance. These autoclave beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
material : polypropylene

these conical measures are very good for measuring small quantities of reagents. moulded in polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. the measures are clear, have good chemical resistance and have raised graduations for easy reading.
material : polypropylene

cryo boxes are moulded in polycarbonate making it extra strong and autoclavable. These can accommodate cryo vials of up to 4. 5 ml. Capacity and are designed to be used at temperatures ranging from -190 c to +121c. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.
material : polycarbonate

These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.
MATERIAL : POLYSTYRENE

cryo rack is moulded in polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vials will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.
material : polycarbonate

this double ended pestle's one end fits 1. 5ml. Micro centrifuge tube & the other one fits 0. 5 ml. Micro centrifuge tube.
material : polypropylene

ELISA/ASSAY plates are made of optically clear, non-toxic Polystyrene. These plates with 96 U bottom or flat bottom wells bear alpha-numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.
MATERIAL : POLYETHYLENE

this stand as the name suggests is use for keeping nestler cylinders. Made of polypropylene, this stand is available in two sizes, one for 50ml nestler cylinder & other for 100 ml. nestler cylinder.
material : polypropylene

this, infact, is a multipurpose apparatus which works as a stirrer as well spatula. the fattened ends of this rod form two small spatulas.

this non-toxic disposable loop is accurate to semi quantitative stand for handling samples.
material : polystyrene

moulded in polypropylene, spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. this edge is helpful in breaking up crystals of different salts while the spoons used to draw salts from the containers.
material : polypropylene

This sterile, smooth spreader enables even spreading of liquid samples across the surface of a jar plate without grouping & cutting the medium.
MATERIAL : POLYPROPYLENE

Made of Polypropylene these corrosion free funnel holders can hold funnels with dia 3 to 6. The extra plate provided can be placed to hold funnels bearing dia 1 to 3. Two tapered wedges are provided to ensure firm grip on Rods having dia or 3/8.
MATERIAL : POLYPROPYLENE

blown in polypropylene, this pot is used for making leclanche cell . This pot too has good contact clarity & excellent chemica resistance.
material : polypropylene

these unique boxes are moulded in polypropylene and are therefore autoclavable. The box-itself is clear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multi channel pipettes. the cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.

a fast release pipetting device for precise pipetting & zip quick emptying the knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip- quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.

these troughs, made of polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc.
material : polypropylene

moulded in polypropylene, this autoclavable reagent reservoir is helpful for multi-channel pipettes to be used into microtiter plates.

slide mailer presents the best option to carry prepared slides from one place to another. Moulded in polypropylene, these slide mailer are available in three sizes 1,2 & 5 slides.

moulded in polypropylene, this staining box helps in staining, fixing, de-staining and handling fragile electrophoresis gels and membranes. box as well as cover will resist temperatures from - 70c to +70c. The ldpe plug provides leakproof seal and allows easy liquid drainage.
material : polypropylene

this float rack mould in polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. easy to load, these are essential in microbiology & immunology labs. the surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
material : polypropylene

these sets consists of moulded balls of different colours and sizes along with connecting lugs of different sizes. these sets are very helpful in modelling different organic & inorganic compounds.
senior set : this set consists of 185 lugs & 370 balls of prescribed colours & size packed in a moulded box having separate space for every particular colour & size of ball.
junior set : this set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.
material : polypropylene

This rack, as the name suggests, is used for keeping PCR tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of Polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multi-pipettes. A no. of racks can be stacked together to save shelf space.

moulded in polycarbonate, these autoclavable rack are made for holding1. 5ml micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. the holes are numbered & lettered for easy identification.

adding to the existing range of slide accessories, this slide storage rack made of abs can hold 100 slides, recognizable through the numeric indexing. spacing between the slots provide adequate backward & forward movement of slides for convenient recognition. the transparent cover provide excellent view of the slides stored inside.

these desiccators are made of polypropylene and polycarbonate. these autoclavable vaccum desiccators can hold vaccum upto 740mm of hg for 24 hrs. Without any greasing. The top dome, moulded in rigid and transparent polycarbonate, gives a crystal clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. The lower part is made of polypropylene. An internal groove is provided on the flange to hold a silicon rubber o- ringthe polypropylene stopcock is fitted with a self lubricating ptfe plug. This plug works three way i. E. Vaccum creation, shutting off & vaccum releasing.
material : polypropylene / polycarbonate

draining rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. this rack does not rot, stain or rust.
material : acrylopitrile butadiene styrene / polycarbonate

magenta box is very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent polycarbonate which provides excellent view of the contents inside while the cover is made of polypropylene. This autoclavable box is square in shape giving itself a space saving feature.
material : polycarbonate / polypropylene

mct boxes are moulded in polycarbonate and are therefore strong as well as autoclavable. one size can hold 64 mcts of 1. 5ml & the other can hold 100 mct's of 0. 5ml. these boxes are designed to work at temperatures ranging from - 190c to +121c. the transparent cover provides a good view of the contents inside & is numbered for better inventory control.
material : polyethylene

as the name suggests, this basket with wide net like structure on all sides prove really useful for draining different laboratory apparatus after washing them. Made of polypropylene, this basket can be repeatedly autoclaved.
material : polypropylene

this kipp's apparatus made of polyethylene has three main portions. the top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the apparatus. hs 2 gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating ptfe plug. the base is provided with a residual outlet fitted with a cap for easy cleaning.
material : high density polyethylene

needless to say, polypropylene laboratory tray moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware porcelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.
material : polypropylene

this burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating ptfe plug. Each burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids & bases except hydrofloric acid & ammonium hydroxide. The ph range of 1- 14 is ideal and can be used upto 5% wt/wt of acids or 30% base.

Measuring cylinders, moulded in polypropylene & TPX, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.
MATERIAL : POLYPROPYLENE

made of polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. the screw cap keeps the contents of the flask contamination free and makes the flask leakproof. threads should be disengaged before autoclaving.
material : polystyrene

these connectors add to the exiting range of connectors. The crest & valley structure provided at all the ends of the connectors give excellent leakproof grip to the tube.
material : polypropylene

these polpropylene petri dishes are clear, unbreakable & autoclavable.
material : polypropylene

these slide boxes are durable, compact & provide utmost protection to 1 x 3 slides. heavy walls will not wrap, splinter or crack. boxes are unaffected by humidity and are thoroughly insect proof.

this autoclavable trays have cover which fits into groove of trays to minimize spillage of material . Smaller size can be used to sterilize small instrument whereas the larger size allows pipettes to be fully immersed in disinfectant prior to ste rilisizing .
material : polypropylene

these non-corrosive, moulded retort stand provided excellent replacement for the metal ones. even the metallic rod has a polypropylene covering it non-corrosive. the rod measuring 12. 5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable retort stand.

this ice bucket is made of a durable rigid material bearing excellent insulating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.
material : polyurethane

Blown in low Density Polyethylene, these Dropping Bottles dispense small uniform drops of liquids when pressed lightly.
MATERIAL : LOW DENSITY POLYETHYLENE

this autoclavable polypropylene tray has a unique feature i. E. Its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.
material : polypropylene

Adding in line with the existing range, these Animal Cages are provided with a stainless steel grill at the bottom of the cage to provide a clean surface for the species to move on.
MATERIAL : POLYPROPYLENE / STAINLESS STEEL

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping.Two tapered wedges are provided to ensure firm grip on rods having dia or 3/8.
MATERIAL : POLYPROPYLENE

Made of Polypropylene, these disposable containers are used for collecting sample of sputum or urine etc. Graduated on the outer surface, these containers have cap that work in a press & fit manner & make these containers leakproof. These disposable containers are E.T.O. Sterilized.

These transparent polypropylene cups can be used to measure different volumes of medicines to be administered . The inbuilt graduations make measuring very easy .
MATERIAL : POLYPROPYLENE

plantation pots,moulded in polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose.
material : polypropylene

these sets consists of moulded balls of different colours and sizes along with connecting lugs of different sizes. these sets are very helpful in modelling different organic & inorganic compounds.
senior set : this set consists of 185 lugs & 370 balls of prescribed colours & size packed in a moulded box having separate space for every particular colour & size of ball.
junior set : this set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.
material : polystyrene

these transparent specimen jar, used preserving different specimens in the lab are provided with a cap that fits in tight. these jars provided excellent protection to the species preserved in it.
material :polystyrene