We offer two types of braiding machines:

1. Reyon/Polyster/GI/Copper Braiding Machine
2. Wire Braiding

BRAIDING MACHINE
Reyon Braiding Machine	Horizontal	Vertical
	Single Deck : 12,16,24,36,48(spindle) Double Deck :12,16,24,36(spindle)	Single Deck :9,12,16, 24, 36,48, 56,64,72(spindle) Double Deck : 9,12,16,24(spindle)
Wire Braiding Machine	Single deck : 16, 24,36, 48(spindle) Double deck : 16, 24,36, 48(spindle)	Single deck : 16, 24,36, 48(spindle) Double deck : 16, 24,36, 48(spindle)

 

These Wire Braiding Machine with Take Up and Pay-off Unit are preferred for bend hose and smooth finish hose. These are available in different types as follows:
 

Parts	Wire Braiding Machine
Horn Gear Size	Standard 8 ½ “(Counter-7 3/8”also
Carrier Material	Metal Steel spring loaded
Bobbin Material	Metal Steel
Upper Plate	Special Generated Iron
Braiding Speed	Depend on pitch

These hose knitting machines are preferred for bend hose and smooth finish hose. These are available in different types as follows:
 
Specification of our 2 Spool are as follows:
 

• 2 spool is used only for polyester
  
• Production capacity per minute/meter.
  
• Size: 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm.
  
• Needle: As per customer requirement.
  
• Fixed with DC motors and panel.
  

 
Specification of our 4 Spool are as follows:
 

• 4 spool is used for polyester
  
• Production capacity double/minute from 2 spool
  
• Fixed with DC motors and panel.
   
  

Specification of our 6 Spool are as follows:
 

• 6 spool is used for polyester
• Production capacity :triple/minute from 2 spool
• Fixed with DC motor and panel.
  

We offer hose coiler machines which are trusted for safe and speedy operation. These machines are user friendly in nature and easy to operate. Specifications of our hose coiler machine are:
 

• Motor- 2 HP to 5 HP DC Motor with panel( subjected to machine size)
  
• Counter meter - Available in multiple sizes

Use:

The Hose coiler Machine is used for rolling the long length of hoses according to client's requirement.

These machines are used to wrap raw rubber hoses with nylon tape before curing. The technical details are as follows:

• Two no. of cutter pillar
  
• Wrapping & unwrapping head
  
• Motor: 3 H.P AC drive
  
• Pitch control by PIV gear box
  
• Speed 10 - 15 mt. per minute
  
• Counter 40-60
  

Winding machines are available in rayon, polyester, G.I, copper winding machines and high tensile wire winding machines. Our rayon polyester, G.I, copper winding machines will wind 2 bobbins at the same time and any size of bobbins can be winded. It has DC motor of 1 HP with panel.

In our high tensil wire winding machine one bobbin will only be able to wind at a time. Any size of bobbin can be used for winding. It has 5 HP motor with panel. Our winding machine is used for high tensile wire winding. Technical specification of our winding machine are as follows:
 

• Pay off spool: 12 ends
  
• Preset counter meter
  
• Auto stop
  
• Bobbin: Any size
• Speed 1000 to 1200 RPM
• Pitch Variable and Manual Adjust
  
• Pitch Control By Spring
  
• Automatic tension control
  

Our range of rope machines are manufactured to impart quality and reliability ensuring high productivity. The range of rope machines are available in 2 to 4 strands or ply, which is useful in manufacturing ropes with a diameters range of 2 mm to 32 mm. Our rope machine are available for making braided and twisted rope.

Braided rope making machine:

• Specification same as Single Deck Reyon Braiding Machine
  

 
Twisted rope making machine
 
Suitable for 2 ply, 3ply and 4ply.

We offer cold feed extruder machines, which are used for extruding cables, rubber hoses, rubber sheeting narrow range etc. This machine is composed of the outer body, decelerator, motor, head etc. The screw and barrel of the machine are made of high quality steel and have good abrasive resistance. Our cold feed extruder machine is driven by variable frequency motor and is suitable and ideal for extruding all kinds of rubber hose.
 
Technical specification of cold feed extruder are as follows:
 

• Size: 75mm, 90mm, 120mm
  
• Motor: Type and capacity of the motor/ panel varies depending on the size of the extruder.
  

 
It is preferably used with cold rubbers.

We offer take & pay off units which are attached with the machines. These are technically accurate ensuring optimum performance.

Specifications of our take & pay off units are:
 

• Available in different sizes
  
• Tension control: By torque motor and panel
  
• Planetary type gear box
  
• Lifting spool with the help of hydraulic Jack spool
  
• As per clients specifications
  

 
This machine is used for long length , this machine is set in front of extruder,cutter-pillar, braiding machine, and hose wrapping & unwrapping machine. Hose wind automatically on the spool and tension of hose set with the help of torque motor, lifting of spool with the help of hydraulic jack.

TAKE UP & PAY OFF UNIT
	Attached with Machine	Not attached With Machine
Drive	inside machine outside machine	outside machine

 

We offer technically accurate spool & trolley, which are made from mild and stainless steel. This trolley is best-suited material handling equipment for carrying for spools within the production unit.

This Machine is used for maintain the Hose ID and OD at the time of extrusion. Cutter piller speed syncronized with extruder machine. This machine in front of the extrusion machine for pulling the mendal or rubber Hose(at time cross) for equal speed so that the variation of ID and OD Will be maintain.