IndiaMART.com

Products & Services

Machine Vices

We are leading Supplier & Distributor for the Machine Vices which also includes APEX Code 749, SG749- Preci Tilting & Swiveling Vice & APEX Code 704- Compound Angle Table(Round Table) since 2006

APEX Code 749, SG749- Preci Tilting & Swiveling Vice

APEX Code 749, SG749- Preci Tilting & Swiveling Vice

Features:

  • (Dovetailed Slide) Vee sideways adjustable for giving prolonged working life.
  • Manufactured to consistent accuracy to give prolonged reliable service.
  • Bearing Surface Precision ground. Flatness within 0.0012" (30 microns)
  • Once locked impossible to shift.
  • Totally enclosed acme screw with three point location of operating in Manganese Bronze Nut.
  • Tenon Slot machined in back as standard for CNC use.
  • Swivel base graduated through 360°
  • Vertical Tilting Capacity 90°

Finish:

  • Hammer tone Ash grey.
  • Code SG749: SG Ductile Iron Body

Finish:

Hammer tone metallic blue.


Specifications

CODE 749
Size In Inches 4 6
Width of Jaws (in mm) 100 150
Depth of Jaws (in mm) 40 55
Opening of Jaws (in mm) 100 150
Overall Length (in mm) 345 510
Overall Height (in mm) 150 200
Overall Width (in mm) 180 250
Tenon Slot Size (in mm) 16 20
Weight (app. in Kgs) 20 49



APEX Code 704- Compound Angle Table(Round Table)

APEX Code 704- Compound Angle Table(Round Table)

Features:

APMovement on the table are indexed fully 360 degree in the Horizontal plane 90 degree in the Vertical. So that any combination of angles may be obtained "T" Slots in the table are machined from the solid and a hole is bored centrally and fitted with a steel Sleeves for receiving Spigots. The table swivel on a ground steel spigot and can be locked in any position by steel clamp shown.

Finish:

Hammer tone mid grey.


Specifications

CODE 704
Size In Inches 9"
SizeOf Table (in mm) 225
Overall Length (in mm) 390
Overall Height (in mm) 190
Tenon Slot Size (in mm) 20
Tslot Size (in mm) 13
Weight (app. in Kgs) 39


APEX Code 704R- Compound Angle Table (Rectangular Table)

APEX Code 704R- Compound Angle Table (Rectangular Table)

Specifications :


CODE 704R
Size In Inches 9" * 7"
SizeOf Table (in mm) 225 * 175
Overall Length (in mm) 390
Overall Height (in mm) 200
Tenon Slot Size (in mm) 20
Tslot Size (in mm) 13
Weight (app. in Kgs) 42



APEX Code SG 701A - Universal Precision Machine Vice

APEX Code SG 701A - Universal Precision Machine Vice

Features:

  • The most versatile of all machine vices with all degrees of freedom, the Universal Vice allows the work piece to be set at any desired angle
  • The specific advantage of this Vice is its ability to be set perpendicular to the base, thereby allowing right angle machining on the same machine setting.
  • Allows for the job to be set at low heights, particularly suitable for the most complicated grinding applications.
  • Totally enclosed acme screw with three point location of operating in Manganese Bronze Nut.
  • Fully graduated 360° swivel base allows complete rotation along the vertical axis. The third angular side with a moving axis allows for any setting in the 3D plane.
  • Sliding jaw runs on accurately ground surfaces fitted with hardened steel keep strips ensuring perfect alignment and rigidity.
  • All swivelling movements have positive locking.


Application:

Primarily designed for use on Surface, Universal and Tool and cutter Grinding Machines. Its sleek and slender design has endeared it to many engineers who look for precision and versatility.


Construction:

  • S.G.Ductile Iron Frame
  • Jaw plates are hardened steel with accurately ground surface.
  • Use of hi tensile grade 10.8 fasteners provides strength and rigidity to these vices.
  • Supplied complete with steel handle.

Finish:

Hammer tone metallic blue.


Specifications

CODE 701a
Size In Inches 4 6
Width of Jaws (in mm) 100 150
Depth of Jaws (in mm) 25 40
Opening of Jaws (in mm) 65 115
Tenon slot Size (in mm) 16 16
Overall Length (in mm) 270 405
Overall Height (in mm) 170 225
Overall Width (in mm) 110 155
Weight (app. in Kgs) 10 25

APEX Code SG 720 - Precision Machine Vice (Swivel Base)

APEX Code SG 720 - Precision Machine Vice (Swivel Base)

Construction:

S.G.Ductile Iron Frame

Finish:

Hammer tone metallic blue.


Specifications :


CODE 720
Size In Inches 4 6
Width of Jaws (in mm) 100 150
Depth of Jaws (in mm) 25 40
Opening of Jaws (in mm) 65 115
Tenon slot Size (in mm) 16 16
Overall Length (in mm) 305 470
Overall Height (in mm) 100 120
Overall Width (in mm) 110 115
Weight (app. in Kgs) 7 18



APEX Code 703,SG703 - Milling Machine Vice Swivel Model

APEX Code 703,SG703 - Milling Machine Vice Swivel Model

Features:

  • Manufactured to consistent accuracy to give prolonged reliable service.
  • Totally enclosed design prevents the ingress of foreign matter and damage to the screw and nut.
  • Swivel base graduated fully 360&deg.
  • Spares readily available..
  • Tenon Slots in slide and swivel base.
  • Available as plain and swivel vice.

Construction:

  • High tensile Stress Relieved quality casting, precision ground hardened & tempered steel jaws plates.
  • ACME thread interchangeable screw, hot stamped manganese bronze nut contained in totally enclosed sliding jaw.
  • Complete with all steel handle.

Finish:

Amazon Green


APEX Code 703p,SG703p - Milling Machine Vice Swivel Model

APEX Code 703p,SG703p - Milling Machine Vice Swivel Model

Features:

  • Manufactured to consistent accuracy to give prolonged reliable service.
  • Totally enclosed design prevents the ingress of foreign matter and damage to the screw and nut.
  • Swivel base graduated fully 360&deg.
  • Spares readily available..
  • Tenon Slots in slide and swivel base.
  • Available as plain and swivel vice.

Construction:

  • High tensile Stress Relieved quality casting, precision ground hardened & tempered steel jaws plates.
  • ACME thread interchangeable screw, hot stamped manganese bronze nut contained in totally enclosed sliding jaw.
  • Complete with all steel handle.

Finish:

Amazon Green


APEX Code 748 & 748p(Milling Machine Vice Deluxe)

APEX Code 748 & 748p(Milling Machine Vice deluxe)

Features:

  • Manufactured to consistent accuracy to give prolonged reliable service.
  • Totally enclosed design prevents the ingress of foreign matter and damage to the screw and nut.
  • Swivel base graduated fully 360&deg.
  • Spares readily available..
  • Tenon Slots in slide and swivel base.
  • Available as plain and swivel vice.

Construction:

  • High tensile Stress Relieved quality casting, precision ground hardened & tempered steel jaws plates.
  • ACME thread interchangeable screw, hot stamped manganese bronze nut contained in totally enclosed sliding jaw.
  • Complete with all steel handle.

Finish:

Amazon Green



Specifications :


CODE 748 & 748p
Size In Inches 4 6 8
Width of Jaws (in mm) 100 150 200
Depth of Jaws (in mm) 40 50 60
Opening of Jaws (in mm) 100 150 200
Overall Length (in mm) 317 480 615
Overall Height (in mm)plain vice 85 110 135
Overall height (in mm)swivel vice 120 145 190
Overall Width (in mm)plain vice 155 245 300
Overall Width (in mm)swivel vice 170 280 325
Tenon Slot Size (in mm) 16 20 20
Weight (app. in Kgs)745 18 46 86
Weight (app. in Kgs)745p 12 34 65

APEX Code 745P(Milling Machine Vice Deluxe)

APEX Code 745P(Milling Machine Vice deluxe)

Features:

  • Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base
  • You can hold piece parts in the most immobile state possible.
  • Three Basics in precision Clamping1. That the movable jaw does not lift off the bed.2. That the body is rigid, and that a minimal amount of bending stresses are created in the clamping area.3. That deflection of the stationary jaw is minimized.
  • Totally enclosed toughened Screw.
  • The bed is guaranteed flat and parallel .0001 per inch.

Construction:

Graded Cast Iron dully stress relieved body. Tool steel hardened & ground Jaws.

In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.

4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.

Finish:

Amazon Green


Specifications

CODE 745P
Size In Inches 4 6 8
Width of Jaws (in mm) 100 150 200
Depth of Jaws (in mm) 48 60 65
Opening of Jaws (in mm) 100 150 200
Overall Length (in mm) 325 520 575
Overall Height (in mm)plain vice 90 115 130
Overall height (in mm)swivel vice 125 150 170
Overall Width (in mm)plain vice 160 225 275
Overall Width (in mm)swivel vice 170 245 300
Tenon Slot Size (in mm) 16 20 20
Weight (app. in Kgs)745P 12 34 60

APEX Code 745(Milling Machine Vice Deluxe)

APEX Code 745(Milling Machine Vice Deluxe)

Features:

  • Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base
  • You can hold piece parts in the most immobile state possible.
  • Three Basics in precision Clamping1. That the movable jaw does not lift off the bed.2. That the body is rigid, and that a minimal amount of bending stresses are created in the clamping area.3. That deflection of the stationary jaw is minimized.
  • Totally enclosed toughened Screw.
  • The bed is guaranteed flat and parallel .0001 per inch.

Construction:

  • Graded Cast Iron dully stress relieved body. Tool steel hardened & ground Jaws.
  • In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
  • 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.

Finish:

Amazon Green


Specifications

CODE 745
Size In Inches 4 6 8
Width of Jaws (in mm) 100 150 200
Depth of Jaws (in mm) 48 60 65
Opening of Jaws (in mm) 100 150 200
Overall Length (in mm) 325 520 575
Overall Height (in mm)plain vice 90 115 130
Overall height (in mm)swivel vice 125 150 170
Overall Width (in mm)plain vice 160 225 275
Overall Width (in mm)swivel vice 170 245 300
Tenon Slot Size (in mm) 16 20 20
Weight (app. in Kgs)745 18 47 80

APEX Code 735 & 735P(Tilt Lock Machine Vice)

APEX Code 735 & 735P(Tilt lock Machine Vice)

Features:

  • Tilt Lock Machine Vice design is beamlike with two vertical and horizontal rails connected to the base
  • You can hold piece parts in the most immobile state possible.
  • Three Basics in precision Clamping1. That the movable jaw does not lift off the bed.2. That the body is rigid, and that a minimal amount of bending stresses are created in the clamping area.3. That deflection of the stationary jaw is minimized.
  • Totally enclosed toughened Screw.
  • The bed is guaranteed flat and parallel .0001 per inch.

Construction:

  • Graded Cast Iron dully stress relieved body. Tool steel hardened & ground Jaws.
  • In addition to the rigid design characteristics, a large heavy nut is drawn up against the machined ways on the inside vice as the movable jaw is drawn down. This creates a heavy mass of material under compression and extremely resistant to bending stresses.
  • 4 Jaws Plate positions allowing extra capacity with the jaw plates in the outside position.

Finish:

Amazon Green


APEX Code 702 - Shaper Vice (Swivel Model)

APEX Code 702 - Shaper Vice (Swivel Model)

Features:

Designed to permit maximum opening of Jaws. 3600 swivel base indexed.

Construction:

  • High tensile Stress Relieved quality casting.
  • High Tensile steel square thread screw with bronze nut./ul>
  • Hardened and precision ground high tensile serrated Jaws ensure firm grips on heavy cuts.

Finish:

Amazon Green


Specifications :


CODE 702
Size In Inches 6 8 10 12
Width of Jaws (in mm) 150 200 250 300
Depth of Jaws (in mm) 55 60 70 75
Opening of Jaws (in mm) 200 250 300 350
Overall Length (in mm)Code 702 550 680 770 870
Overall Length(in mm)Code702P 490 635 710 810
Overall Width (in mm)Code702 210 285 325 375
Overall Width (in mm)Code702P 200 280 320 365
Overall Height (in mm)Code702 160 175 205 230
Overall Height (in mm)Code702P 120 130 155 175
Weight(app.in kgs)Code702P 24 48 75 100
Weight (app. in Kgs)code702 31 65 102 140

APEX Code 702p - Shaper Vice (Plain Model)

APEX Code 702p - Shaper Vice (Plain Model)

Features:

Designed to permit maximum opening of Jaws. 3600 swivel base indexed.

Construction:

  • High tensile Stress Relieved quality casting.
  • High Tensile steel square thread screw with bronze nut./ul>
  • Hardened and precision ground high tensile serrated Jaws ensure firm grips on heavy cuts.

Finish:

Amazon Green

Specifications :


CODE 702p
Size In Inches 6 8 10 12
Width of Jaws (in mm) 150 200 250 300
Depth of Jaws (in mm) 55 60 70 75
Opening of Jaws (in mm) 200 250 300 350
Overall Length (in mm)Code 702 550 680 770 870
Overall Length(in mm)Code702P 490 635 710 810
Overall Width (in mm)Code702 210 285 325 375
Overall Width (in mm)Code702P 200 280 320 365
Overall Height (in mm)Code702 160 175 205 230
Overall Height (in mm)Code702P 120 130 155 175
Weight(app.in kgs)Code702P 24 48 75 100
Weight (app. in Kgs)code702 31 65 102 140

APEX Code 761 - Low Height Machine Vice

APEX Code 761 - Low Height Machine Vice

Features:

Designed to permit maximum opening of Jaws. 3600 swivel base indexed.

Construction:

  • High tensile Stress Relieved quality casting.
  • High Tensile steel square thread screw with bronze nut./ul>
  • Hardened and precision ground high tensile serrated Jaws ensure firm grips on heavy cuts.

Finish:

Amazon Green



Specifications :


CODE 761
Size In Inches 4"
Width of Jaws (in mm) 100
Depth of Jaws (in mm) 30
Opening of Jaws (in mm) 65
Overall Length (in mm) 300
Overall Height (in mm) 60
Overall Width (in mm) 140
Weight (app. in Kgs) 7

APEX Code SG736(Machine Clamps)

APEX Code SG736(Machine Clamps)

Features:

  • Free jaws setting for un-limited Vice opening allowing complete use of large machine table.
  • The Jaw face gets access to the work piece as the slide slopes down on the slant by revolving the adjusting screws, and so the workpiece is clamped tightly pressed down to the table.
  • Mechanical height limit is useful for attaining constant clamping pressure.
  • Precise Dovetail slide in angle of 70 assures positive compound forward & downward clamping force.
  • Slide clamping keeps full surface free for complete machining operation in one setting.
  • It is useful for job heights more than 60mm./ul>

Finish:

Hammer tone metallic blue


Specifications

CODE 736
Size In Inches 2.1/2 3 4
Height (in mm) MIn 55 100 135
Height (in mm) Max 70 155 170
Width (in mm) 60 80 100
Length (in mm) 135 190 255
T-Slot Size (in mm) 12 to 18 20 to 26 28 to above
Weight (app. in Kgs) 3 7.7 22.5

APEX Code 712 - Precision Drill Vice

APEX Code 712 - Precision drill Vice

Features:

  • Moving jaw is plain & fixed is provided with one vertical & two horizontal 90 V-grooves.
  • The base and slides are precision ground for stability and accurate operation.
  • Continuous Screw giving powerful grip on work.

Finish:

Amazon Green

Specifications

CODE 712
Size In Inches 4 6 8
Width of Jaws (in mm) 100 150 200
Depth of Jaws (in mm) 40 55 60
Opening of Jaws (in mm) 140 220 280
Overall Length (in mm) 350 460 585
Overall Height (in mm) 80 110 130
Overall Width (in mm) 205 255 315
Weight (app. in Kgs) 11 26 51

Piece Milling Vice

Piece Milling Vice

APEX Code 762 - Super Opening Adjustable 2-Piece Milling Vice
Features:

  • Free jaws setting for un-limited Vice opening allowing complete use of large machine table.
  • The Jaw face gets access to the work piece as the slide slopes down on the slant by revolving the adjusting screws, and so the workpiece is clamped tightly pressed down to the table.
  • Mechanical height limit is useful for attaining constant clamping pressure.
  • Precise Dovetail slide in angle of 70 assures positive compound forward & downward clamping force.
  • Slide clamping keeps full surface free for complete machining operation in one setting.
  • It is useful for job heights more than 60mm.

Construction:

  • S.G. Ductile Iron body.
  • Clamping Jaw made of Hardened Steel.
  • Body High tensile Stress Relieved quality casting.

Finish:

Hammer tone mid grey.



Specifications

CODE 762
Size In Inches 6
Height of Jaws (in mm) 73
Widht of Jaws (in mm) 150
Tennon Slot Size (in mm) 20
Overall Length (in mm) 340
Overall Height (in mm) 73
Overall Width (in mm) 180
Clamp Travel (in mm) 25
Weight (app. in Kgs) 16



APEX Code SG 724 - Self Centering Shaft Vice

APEX Code SG 724 - Self Centering Shaft Vice

Features:

  • Centering Vices are constructed to hold bars and tubes in firm concentric grip. They feature 4 point clamping contact so work pieces are held securely without hard clamping which can result in damage to delicate partsli> Bearing Surface Precision ground. Flatness within 0.0012" (30 microns).
  • The Vice is precisely manufactured of highest quality material , has an accuracy of parallelism of .006" per ft.li>Totally enclosed acme screw with three point location of operating in Manganese Bronze Nut.


Construction:

  • Close Grey Iron dully stress relieved body.
  • The supporting tool steel V - Block is hardened and ground and is reversible to accommodate a wide range of diameters.

Finish:

Hammer tone mid grey.


Specifications

CODE 724
Size In Inches 4 7
Width of Jaws (in mm) 110 180
Round Bar Capacity (in mm) 10 to 80 50 to150
Vee Jaws (in mm) Reversible Reversible
Holding Capacity (in mm) 10 to 28 50 to 90
Holding Capacity(by reversing vee jaws) (in mm) 20 to 80 90 to 150
Weight (app. in Kgs) 23 61



APEX Code 775,SG775 - Precision Drill Press Vice

APEX Code 775,SG775 - Precision Drill Press Vice

Features:

The Ubiquitous Drill Vice is more than a fixture in any workshop. It is a necessity. These are specially designed for use by professionals who require a heavy Vice.
This vice offers a ground vice bed for smooth & consistent jaw movement.

construction:

  • Manufactured from close grained cast iron.
  • Jaws are hardened & ground.

Finish:

Amazon Green

CODE SG775 :

  • SG Ductile Iron Body.
  • Hammer Tone Metallic Blue


Specifications

CODE 775
Size In Inches 4 6
Width of Jaws (in mm) 100 150
Opening of Jaws (in mm) 105 170
Depth of Jaws (in mm) 35 50
Overall Length (in mm) 335 440
Overall Height (in mm) 700 100
Overall Width (in mm) 200 260
Weight (app. in Kgs) 18 22

APEX Code 709 - Standard Rack Machine Vice

APEX Code 709 - Standard Rack Machine Vice

Features:

  • The cylindrical section of the lower part of the loose Jaw swivels allowing tapered or irregular work to be held rigidly.
  • Jaws Plates Automatically pull work down.
  • The positions of the loose Jaw is instantly adjustable to the full capacity of the vice.
  • Jaw plate is serrated to give extra gripping power.
  • Work can also be cut or drilled below the bottom of the jaw. This can not be done in the ordinary vice without injuring screw.
  • Supplied complete with tommy bar.

Finish:

Hammer tone mid grey.

Specifications

CODE 709
Size In Inches 4 5 6 8
Width of Jaws (in mm) 100 125 150 200
Depth of Jaws (in mm) 40 50 50 60
Opening of Jaws(in mm) 230 260 325 400
Overall Length (in mm) 460 490 560 725
Overall Height(in mm) 90 105 120 130
Overall Width (in mm) 205 235 260 345
Weight (in kgs) 16 26 34 69

APEX Code 760 - Heavy Duty Drill Vice

APEX Code 760 - Heavy Duty drill Vice

Features:

  • Continuous Screw giving powerful grip on work.
  • No lifting of the sliding jaw.
  • CMoving jaw is plain & fixed is provided with one vertical & one horizontal 90 V-grooves.

Finish:

  • Hammer tone mid grey.
  • Code 760 :o These Vices have all the features as said above except its UNIQUE DESIGN and specifications like ample depth of jaws.
  • Slide Face is Machined, hence can be used upside down (Vertically)

Specifications

CODE 760
Size In Inches 3 4 6
Width of Jaws (in mm) 75 100 150
Depth of Jaws (in mm) 50 65 70
Opening of Jaws (in mm) 80 115 160
Overall Length (in mm) 235 285 350
Overall Height (in mm) 72 95 119
Overall Width (in mm) 145 185 245
Weight (app. in Kgs) 5 9 18

APEX Code 713 & SG 713 - Drill Machine Vice

APEX Code 713 & SG 713 - Drill Machine Vice

Features:

  • Continuous Screw giving powerful grip on work.
  • No lifting of the sliding jaw.
  • Moving jaw is plain & fixed is provided with one vertical & one horizontal 90 V-grooves.

Construction:

  • Closed grained C.I. body
  • Code SG713:
  • SG Ductile Iron Body

Finish:

  • Hammer tone mid grey.
  • Code SG 713
  • Hammer tone metallic blue.

Specifications

APEX Code 713 & SG 713 - Drill Machine Vice >> Specifications CODE 713
Size In Inches 3 4 5 6 8
Width of Jaws (in mm) 75 100 125 150 200
Depth of Jaws (in mm) 35 40 50 55 70
Opening of Jaws(in mm) 100 130 140 175 225
Overall Length (in mm) 265 310 320 380 495
Overall Height(in mm) 70 75 90 95 112
Overall Width (in mm) 130 172 190 222 270
Weight (in kgs) 4.5 7 10 15 26

APEX Code 710-Unigrip Machine Vice

APEX Code 710-Unigrip Machine Vice

Features:

  • Small compact and indispensable Vices with steel jaws. On the face of which are grooved horizontal and vertical notches for holding, round, square, thin & irregular work for drilling & light milling.
  • Vices are equipped with a convenient unigrip mechanism. Spindle moves inside the hollow hand grip allowing the vice to be used at a location away from table edge. This feature increase the scope of application of the range of vices.

Finish:

  • Hammer tone mid grey.
  • Code SG710 : SG Ductile Iron Bodys


Specifications

CODE 710
Size In Inches 3.1/4 4 6
Width of Jaws (in mm) 80 100 150
Depth of Jaws (in mm) 25 25 40
Opening of Jaws (in mm)Lower Portion 80 115 140
Opening of Jaws (in mm)Upper Portion 85 120 160
Overall Length (in mm) 260 325 415
Overall Height (in mm) 50 55 60
Overall Width (in mm) 145 180 240
Weight (app. in Kgs) 3 5 10

APEX Code 717 - Empire Machine Vice(Fixed Base)

APEX Code 717 - Empire Machine Vice(Fixed Base)

Features:

All the sides of Body are Ground. Perfectly parallel and square to ensure complete alignment of Jaws. They can be used horizontal, Vertical and longitudinal positions./ul>

Construction:

Body side Base, cast iron of selected quality, Main Screw Handle and side plates, High quality steel.

Finish:

Hammer tone mid grey.


Specifications

CODE 717
Size In Inches 1.1 /2 2.1 /2 3 4
Width of Jaws (in mm) 40 65 75 100
Depth of Jaws (in mm) 22 30 40 45
Opening of Jaws(in mm) 35 65 85 100
Overall Length (in mm) 130 210 235 295
Overall Height(in mm) 45 60 75 80
Overall Width (in mm) 40 65 76 102
Weight (in kgs) 0.8 2.4 4 6.5

APEX Code 717A - Empire Angle Machine Vice

APEX Code 717A - Empire Angle Machine Vice

Features:

  • All the sides of Body are Ground. Perfectly parallel and square to ensure complete alignment of Jaws. They can be used horizontal, Vertical and longitudinal positions.
  • For Holding components at any angle between 0 to 60 degrees.
  • Rapid setting with protractor scale (0 -60 )
  • Angle rigidly held with single strap clamp.

Construction:

Body side Base, cast iron of selected quality, Main Screw Handle and side plates, High quality steel.

Finish:

Hammer tone mid grey.


Specifications

CODE 717a
Size In Inches 2.2/2 3
Width of Jaws (in mm) 65 75
Opening of Jaws (in mm) 65 80
Depth of Jaws (in mm) 30 40
Overall Length (in mm) 230 275
Overall Height (in mm) 85 100
Overall Width (in mm) 90 105
Weight (app. in Kgs) 4 6

Empire Angle Machine Vice

Empire Angle Machine Vice

Apex Code 717AS - Empire Angle Machine Vice With Graduated Swivel Base
Features:

  • All the sides of Body are Ground. Perfectly parallel and square to ensure complete alignment of Jaws. They can be used horizontal, Vertical and longitudinal positions.
  • Code 717A is mounting on swivel base providing 3600 bases have 5/8" key way and bolt slots for locating and mounting of machine.

construction:

Body side Base, cast iron of selected quality, Main Screw Handle and side plates, High quality steel.

Finish:

Hammer tone mid grey.


Specifications

CODE 717as
Size In Inches 2.2/2 3
Width of Jaws (in mm) 65 75
Opening of Jaws (in mm) 65 80
Depth of Jaws (in mm) 30 40
Overall Length (in mm) 230 275
Overall Height (in mm) 115 130
Overall Width (in mm) 110 130
Weight (app. in Kgs) 5 7

APEX Code 714 - Self Centering Vice (Plane Model)

APEX Code 714 - Self Centering Vice (Plane model)

Features:

  • The self Centering vice allows for accurate centering of jobs, automatically.
  • The Special design allows accurate setting up of jobs with only a single machine setting. Centric clamping is particularly useful in milling, slot and groove cutting of all kinds

Application:

The vice is specially useful in applications where the same operation is to be performed on work pieces of varying sizes.

 
Finish:

Hammer tone mid grey.


Specifications

CODE 714
Size In Inches 2 3 4
Width of Jaws (in mm) 50 80 100
Depth of Jaws (in mm) 30 32 35
Opening of Jaws (in mm) 85 115 125
Overall Length (in mm) 235 310 335
Overall Height (in mm) 65 80 85
Overall Width (in mm) 100 115 175
Weight (app. in Kgs) 3 7 10

APEX Code 714S - Self Centering Vice (Swivel Mode)

APEX Code 714S - Self Centering Vice (Swivel Mode)

Features:

Fully graduated 360° swivel base allows the vice to be set at any angle along the vertical axis.

 
Finish:

Hammer tone mid grey.


Specifications

CODE 714S
Size In Inches 3 4 6
Width of Jaws (in mm) 80 100 150
Depth of Jaws (in mm) 30 35 52
Opening of Jaws (in mm) 120 135 195
Overall Length (in mm) 300 380 460
Overall Height (in mm) 100 120 160
Overall Width (in mm) 110 138 190
Weight (app. in Kgs) 8 11 24

APEX Code 719 -Preci Self Centering Vice

APEX Code 719 -Preci Self Centering Vice

Features:

Fully graduated 360° swivel base allows the vice to be set at any angle along the vertical axis.

Finish:

Amazon Green


Specifications

CODE 719
Size In Inches 4
Width of Jaws (in mm) 100
Depth of Jaws (in mm) 35
Opening of Jaws (in mm) 100
Overall Length (in mm) 260
Overall Height (in mm) 130
Overall Width (in mm) 175
Weight (app. in Kgs) 14

Apex Code 708 Compound Sliding Table

Apex Code 708 Compound Sliding Table

Apex Code 708 Compound Sliding Table (with Calibrated Wheel And Swivel Graduated Base)
Features:

  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.

Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Top surface of the table has one longitudinal T-Slot and one cross T-Slot.


Finish:

Amazon Green


Specifications

CODE 708
Size In Inches 6x6 8x8
Table Size (in mm) 150x150 200x200
Height Overall (in mm) 102 102
Length Overall (in mm) 300 350
T-slot Size (in mm) 10 10
Travel Bothways (in mm) 100x100 125x125
Sliding Travel (in mm) --- --
Swivel Graduation (in mm) 360° 360°
708 Jaw Width (in mm) 85 85
708 Jaw Depth (in mm) 45 45
Wheel Graduation (in mm) 0 0
Weight (app. in Kgs) 80 90

Single Sliding Table

Single Sliding Table

Apex Code 708S Single Sliding Table(With Calibrated Wheel And Swivel Graduated Base)
Features:

  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.

Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Single is one way travel only.


Finish:

Amazon Green


Specifications

CODE 708s
Size In Inches 6x6 8x8
Table Size (in mm) 150x150 200x200
Height Overall (in mm) 57 62
Length Overall (in mm) 300 350
T-slot Size (in mm) 10 10
Travel Bothways (in mm) Single Single
Sliding Travel (in mm) --- --
Swivel Graduation (in mm) --- ---
708 Jaw Width (in mm) 85 85
708 Jaw Depth (in mm) 45 45
Wheel Graduation (in mm) 0 0
Weight (app. in Kgs) 11 12

APEX Code 707 (Compound Sliding Table)

APEX Code 707 (Compound Sliding Table)

Features:

  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.

Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.

Top surface of the table has two equally spaced cross T-Slots.


Finish:

Amazon Green


Specifications

CODE 707
Size In Inches 12x8
Table Size (in mm) 300x200
Height Overall (in mm) 120
Length Overall (in mm) 510
T-slot Size (in mm) 13
Travel Bothways (in mm) 200x125
Sliding Travel (in mm) ...
Swivel Graduation (in mm) 360°
708 Jaw Width (in mm) 105
708 Jaw Depth (in mm) 45
Wheel Graduation (in mm) 0
Weight (app. in Kgs) 40

Compound Sliding Table

Compound Sliding Table

Apex Code 707A Compound Sliding Table(with Calibrated Wheel And Swivel Graduated Base)
Features:

  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.

Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Top surface of the table has two equally spaced cross T-Slots & one longitudinal T-Slot.


Finish:

Amazon Green


Specifications

CODE 707a
Size In Inches 12x12 12x20 16x16
Table Size (in mm) 300x300 300x500 400x400
Height Overall (in mm) 110 143 143
Length Overall (in mm) 510 750 645
T-slot Size (in mm) 13 16 16
Travel Bothways (in mm) 200x200 300x400 300x300
Sliding Travel (in mm) --- -- ---
Swivel Graduation (in mm) 360° 360° 360°
Jaw Width (in mm) 105 150 150
Jaw Depth (in mm) 45 45 50
Wheel Graduation (in mm) 0 0 0
Weight (app. in Kgs) 45 95 105

APEX Code 708 Jaws For Compound Sliding Table.

APEX Code 708 Jaws For Compound Sliding Table.

Features:

  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.

Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Top surface of the table has two equally spaced cross T-Slots & one longitudinal T-Slot.
  • Suitable For 708, 708s 707 , 707a


Finish:


Amazon Green

Compound Sliding Table

Compound Sliding Table

Apex Code 707T For Compound Sliding Table(with Calibrated Wheels & Swivel Graduated Base)
]Features:


  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.


Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Top surface of the table has three equally spaced T-Slots.


Finish:

Amazon Green

APEX Code 732 Compound Sliding Table(with Calibrated Wheel)

APEX Code 732 Compound Sliding Table(with calibrated wheel)

Features:

  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.


Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Top surface of the table has one longitudinal T-Slot and three equally spaced cross Slots.


Finish:

Amazon Green




Specifications

CODE 732
Size In Inches 12x6
Table Size (in mm) 300x150
Height Overall (in mm) 115
Length Overall (in mm) 440
T-slot Size (in mm) 13
Travel Bothways (in mm) 200x115
Sliding Travel (in mm) ...
Swivel Graduation (in mm) ...
708 Jaw Width (in mm) 85
708 Jaw Depth (in mm) 45
Wheel Graduation (in mm) 0
Weight (app. in Kgs) 18

APEX Code 711 Vertical Sliding Table

APEX Code 711 Vertical Sliding Table

APEX Code 711 Vertical Sliding Table (with Calibrated wheel and swivel graduated base)
Features:

  • Designed to permit maximum opening of Jaws.The T-Slots are machined from Solid.
  • Equipped with two axis positioning.
  • Dovetailed slides have adjustable steel gibs to compensate for wear.
  • The surface table can swivel all round and 0 is marked to show the angular movement.
  • Base have bolt slots for machine mounting.


Application:

These precision built standard slide tables are essential for accurate boring drilling, grinding, and milling operations


Construction:

  • Casting are the close Grey Iron dully stress relieved accurately machined and ground surface provide tolerance well within 0.01 MM / 100 MM.
  • Precision ACME feed screw is running in a hot stamped phosphor Bronze Nut thrust color for smooth operation and minimum back lash.
  • Designed to fit on any Lathe, will enable you to mill slots, Key ways, grooves, flats, squares, also drilling at any angle.


Finish:

Amazon Green



Specifications

CODE 711
Size In Inches 7x10
Table Size (in mm) 175x250
Height Overall (in mm) 270
Length Overall (in mm) 465
T-slot Size (in mm) 13
Travel Bothways (in mm) ...
Sliding Travel (in mm) 180
Swivel Graduation (in mm) 180°
708 Jaw Width (in mm) ...
708 Jaw Depth (in mm) ...
Wheel Graduation (in mm) 0
Weight (app. in Kgs) 23.5

Compound Sliding Table

Compound Sliding Table

Apex Code 706 Compound Sliding Table(With Swivel Graduated Base)
Features:


These slide tables have all the features of the standard slide range except the handles are plain (with out calibrations)

Finish:

Amazon Green


Specifications

CODE 706
Size In Inches 6x6 8x8
Table Size (in mm) 150x150 200x200
Height Overall (in mm) 102 102
Length Overall (in mm) 300 350
T-slot Size (in mm) 10 10
Travel Bothways (in mm) 100x100 125x125
Swivel Graduation (in mm) 360° 360°
Weight (app. in Kgs) 16 18

APEX Code 706S (Single Sliding Table)

APEX Code 706S (Single Sliding Table)

Specifications

CODE 706S
Size In Inches 6x6 8x8
Size Of Table (in mm) 150x150 200x200
Overall Height (in mm) 57 62
Overall Length (in mm) 300 350
T-Slot Size (in mm) 10 10
Swivel Graduation (in mm) ... ...
Travel Bothways (in mm) Single Single
Weight (app. in Kgs) 16 18

APEX Code 705D (Compound Sliding Table)

APEX Code 705D (Compound Sliding Table)

Specifications

CODE 705D
Size In Inches 12x8
SizeOf Table (in mm) 300x200
Overall Length (in mm) 510
Overall Height (in mm) 120
Travel Bothways (in mm) 200x125
Swivel Graduation 360*
Tslot Size (in mm) 13
Weight (app. in Kgs) 35



APEX Code 722 (Profiling Miling & Slotting Slide)

APEX Code 722 (Profiling Miling & Slotting Slide)

Features:

  • The Longitudinal movement is applied manually and can be adjusted as per job requirement by the adjustment of two end stops provided.
  • Cross Traverse movement is applied through screw action provided with graduated wheel.
  • Table is provided with T-Slot or mounting indexing and dividing head grooves are provided for passing the used coolant liquid to the tank.


Application:

Versatile for use with many machines such as milling, slotting, drilling or shaping machines.


Finish:

Amazon Green


Specifications

CODE 722
Size In Inches 18x5
Size Of Table (in mm) 450x125
Length Of Stroke (in mm) 155
Longitudinal Travel (in mm) 230
Cross Travel (in mm) 135
Working Area Of Table (in mm) 440x90
Size Of T-Slot (in mm) 10
Height Of Centre (in mm) ...
Between Centre (in mm) ...
Direct Dividing Plate Division ...
Wheel Calibration (in inches) 0
Height Overall (in mm) 140
Weight (app. in Kgs) 33

APEX Code 722D (Profiling Miling & Slotting Slide)

APEX Code 722D (Profiling Miling & Slotting Slide)

Features:

  • The Longitudinal movement is applied manually and can be adjusted as per job requirement by the adjustment of two end stops provided.
  • Cross Traverse movement is applied through screw action provided with graduated wheel.
  • Table is provided with T-Slot or mounting indexing and dividing head grooves are provided for passing the used coolant liquid to the tank.


Application:

Versatile for use with many machines such as milling, slotting, drilling or shaping machines.


Finish:

Amazon Green


Specifications

CODE 722d
Size In Inches 18x5
Size Of Table (in mm) 450x125
Length Of Stroke (in mm) 155
Longitudinal Travel (in mm) 230
Cross Travel (in mm) 135
Working Area Of Table (in mm) 440x90
Size Of T-Slot (in mm) 10
Height Of Centre (in mm) 75
Between Centre (in mm) 215
Direct Dividing Plate Division 1-30,34,39,46,48
Wheel Calibration (in inches) 0
Height Overall (in mm) 270
Weight (app. in Kgs) 39

APEX Code 721 (Universal Compound Vice)

APEX Code 721 (Universal Compound Vice)

Features:


Use these Vices on your Drilling machines for cutting Key-ways, doing light jobs, making milling attachment for your lathe, making cross-sides for your wood lathes and numerous other uses. Vice fits on any Drilling Machine.


Finish:

Amazon Green


Specifications

CODE 721
Size In Inches 5
Width of Jaws (in mm) 125
Depth of Jaws (in mm) 55
Opening of Jaws (in mm) 135
Overall Length (in mm) 440
Overall Height (in mm) 170
Overall Width (in mm) 420
Travel Bothways (in mm) 175 x 150
Weight (app. in Kgs) 19

APEX Code 715 Rotary Milling Table

APEX Code 715 Rotary Milling Table

Application:

APEX ROTARY TABLES have a sturdy design to suit many machining operations on Milling Machines including circular cutting, setting angles and indexing. They are available in a range of sizes to suit various machines and machining applications.


Construction:

  • The table and base is manufactured from close grain shock resisting Cast Iron dully stress relieved
  • Worm & center table bush made of selected steel.


Inspection:

  • Direct reading to 2 minute for size 6",8" and 10" on hand wheel scale.
  • Direct reading to 1 minute for size 12",15",18" and 20" on hand wheel scale.
  • ACCURACY:- Maximum error 4 minutes of circular division using hand wheels.
  • Table flat to within 0.01 mm / 100 mm.
  • Working surface rotates in its own plane to within 0.030 mm.
  • Horizontal and Vertical supporting surface square with 0.01mm/100 mm.
  • Centre bush bore is true to table axis within 0.03 mm.
  • Maximum parallelism error through 360° rotation of table is .025 mm .
  • The Base is provided with two bolt slots


Finish:

Hammer tone mid grey.


APEX Code 715E Rotary Milling Table Horizontal And Vertical

APEX Code 715E Rotary Milling Table Horizontal and Vertical

Features:

  • High accuracy, easy reading of all dias clear & functional arrangement of all operating elements, sturdy yet good looking practical design. These are widely used for circular cutting, angle setting, boring and spot facing with a milling machine.
  • Works as an index center in the vertical position, as well as conventional Rotary Table, graduated 360&deg.
  • Provision for fine adjustments when setting work piece.
  • Efficient lock provided.
  • Worm drive disengagement is quick and precise.
  • An eccentric sleeve with thrust Bearing races encases the worm shaft.
  • End play in worm shaft is adjustable.


Application:

APEX ROTARY TABLES have a sturdy design to suit many machining operations on Milling Machines including circular cutting, setting angles and indexing. They are available in a range of sizes to suit various machines and machining applications.


Construction:

  • The table and base is manufactured from close grain shock resisting Cast Iron dully stress relieved
  • Worm & center table bush made of selected steel.


Inspection:

  • Direct reading to 2 minute for size 6",8" and 10" on hand wheel scale.
  • Direct reading to 1 minute for size 12",15",18" and 20" on hand wheel scale.
  • ACCURACY:- Maximum error 4 minutes of circular division using hand wheels.
  • Table flat to within 0.01 mm / 100 mm.
  • Working surface rotates in its own plane to within 0.030 mm.
  • Horizontal and Vertical supporting surface square with 0.01mm/100 mm.
  • Centre bush bore is true to table axis within 0.03 mm.
  • Maximum parallelism error through 360° rotation of table is .025 mm .
  • The Base is provided with two bolt slots and both Horizontal & Vertical mounting on Machine Table.


Finish:

Hammer tone mid grey.


APEX Code 715h Indexing Device

APEX Code 715h Indexing Device

APEX Code 715h Indexing Device (For Rotary Tables) (Code 715 & 715E)
Features :

  • Optional unit to enable the user to convert quickly Rotary Milling to using Indexing Plates.
  • The dividing plate set consist of 2 indexing plates, a sector & a handle with plunger.
  • Using this dividing plate set the indexing of 2 to 60 divisions can be attained quickly and accurately.


Specifications

CODE 715H
Size In Inches 6 8 10 12 118 6 20
Dia Of table (in mm) 150 200 250 300 375 450 500
Table T-slot Size (in mm) 10 13 13 16 16 20 20
Centre Bush Bore(Morse Taper) 2 3 3 3 3 4 4
Worm and gear Ratio 02:12:00 AM 02:12:00 AM 02:12:00 AM 01:20:00 AM 01:20:00 AM 01:20:00 AM 01:22:00 AM
Wheel calibration(in minutes) 2 2 2 1 1 1 1
No Of Indexing Holes 19|27 23|25 30|33 28|31 41|47 39|43 19|27 23|25 30|33 28|31 41|47 39|43 53|61 51|59
Weight (in kgs) 2.5 2.5 2.5 3.5 3.5 3.5 3.5

APEX Code 766 (Indexing Collet Fixture) (For Collet A-25 & A-42)

APEX Code 766 (Indexing Collet Fixture) (For Collet A-25 & A-42)


Features:

  • Adjustable locking levers ensure perfect vibration less working.
  • The base plate is splash-proof and is provided with an inter-changeable index plate.
  • Clamping and unclamping is fast, Indexing is quick and accurate. Hence one can achieve substantial increase in efficiency at the same time maintaining indexing accuracies.
  • Ideal for batch and mass production, tool rooms and production shops.

Application:

  • The Collet Fixture is developed for various production jobs. The standard collet of Traub A-25 or A-42 can be conveniently used on the fixture to perform various milling operations like slotting, gangmilling, square, hex milling and PCD Drilling.
  • Supplied without collet./ul>

Finish:

Black oxidized & Hammer tone mid grey.


Specifications :


CODE 766 (A-25) 766 (A-42)
Over All Length(in mm) 320 320
Overall Width(in mm) 230 230
Graduation 360 360
Distance Between Slots 295 295
Chuck Size (in mm) ... ...
Chuck Hole (in mm) ... ...
Weight (app. in Kgs) 17 17

Collet Fixture

Collet Fixture

APEX Code 770 Collet Fixture (For Trab A-25 ,A-42 & Herbert 2D Collet)
Features:

  • Split second clamping & unclamping of job.
  • Most versatile application.
  • Ideal & efficiency booster for mass production.


Construction:

  • SG Ductile Iron Body (Unbreakable).
  • Collect holder made of selected steel hardened & ground.


Finish:

Black oxidized & Hammer tone metallic blue.


Specifications:


CODE SG770-A25 SG 770-A42 SG770-H2D
Suitable For Traub A-25 Collets Traub A-42 Collets Herbert 2D Capstan Lathe Collets
Length (in mm) 220 220 220
Width (in mm) 110 110 110
Height (in mm) 110 110 110
Collet Capacity(in mm) A-25 A-45 H2d
Weight (in mm) 6.5 7.5 7.5

APEX Code 765 (Tilting Indexing Device)

APEX Code 765 (Tilting Indexing Device)

Features:

  • For bigger quantity work, rapid indexing is simplified by use of replaceable notched rings can be notched to individual requirements.
  • Rapid direct indexing through 360 by means of scales graduated in units of one degree division on the flanges.
  • Indirect indexing is by means of worm and worm wheel giving direct reading of one minute on handwheel scales.
  • The chuck can be swivelled up to 90
  • Worm Gear is easily and quickly detachable for direct indexing.
  • Three Jaws chuck is standard equipment with one set of reverse jaws.
  • The Graduation ring on hand knob is adjustable./ul>


Application:

An ideal indexing device for mechanics, tool makers and engravers for speedy and precision milling, drilling, boring and grinding operations.


Finish:

Amazon Green


Specifications

CODE 765
Size In Inches 4 8
Diameter chuck (in mm) 100 200
Length (in mm) 250 300
Width (in mm) 220 280
Height (in mm) 190 270
Swivel (in mm) 360° 360°
Tilting (in mm) 90° 90°
Slot Distance (in mm) 170 275
Weight (app. in Kgs) 16 62

APEX Code 723 (Tilting Table)

APEX Code 723 (Tilting Table)

Features:

  • Special design for angle setting on various machine tools.
  • Low profile for larger working space.
  • The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts.
  • Can be adjusted by 45 on both right-hand and left-hand side.
  • The angle marking are accurate and easy to read.


Application:

Useful accessory for setting work at an angle for milling or other operations.


Construction:

Cast Iron Stress Relieved Tilting Table.


Finish:

Hammer tone mid grey.


Specifications

CODE 723
Size In Inches 5x7 7x10 10x15
Size Of Table (in mm) 125x175 175x250 250x375
Overall Height (in mm) 98 138 174
T-Slot Size (in mm) 13 16 16
Calibration Code (in mm) 0°-90° 0°-90° 0°-90°
Weight (app. in Kgs) 9 22 45

APEX Code 723s Tilting Table(With Swivel Base)

APEX Code 723s Tilting Table(With Swivel Base)

Features:

  • Special design for angle setting on various machine tools.
  • Low profile for larger working space.
  • The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts.
  • Can be adjusted by 45 on both right-hand and left-hand side.
  • The angle marking are accurate and easy to read.


Application:

Useful accessory for setting work at an angle for milling or other operations.


Construction:

  • Cast Iron Stress Relieved Tilting Table.
  • The unique design on Connecting Plate and 360 Graduated Swivel Base, making it possible for the Angle Plate to do rotation at any angles.


Finish:

Hammer tone mid grey.


Specifications

CODE 723s
Size In Inches 5x7 7x10 10x15
Size Of Table (in mm) 125x175 175x250 250x375
Overall Height (in mm) 135 180 225
Width Overall (in mm) 230 320 470
Length Overall (in mm) 315 410 560
T-Slot Size (in mm) 13 16 16
Swivel Graduation (in mm) 360° 360° 3360°
Weight (app. in Kgs) 14 35 54

APEX Code SG 771,771T(All Steel Precision Grinding Vices)

APEX Code SG 771,771T(All Steel Precision Grinding Vices)

Features:

  • All Vice surfaces are precision ground.
  • The movable jaw is slightly narrow than the base enabling the vices to be used on either sides in addition to the base.
  • Clamping and releasing is through a threaded spindle with precision cut square threads for smooth operation.
  • Vice spindle moves in a specially designed gun metal bush which reduces wear thus enhancing the life of the vice.
  • Fix Jaw side threaded for clamp support 5/16"BSW.
  • These are available in two models.


Application:

Used in tool manufacturing, on grinding, milling, and jig boring machines for measurement an inspection work and in manufacturing processes that require highest standards of clamping acuracy.


Construction:

Manufactured from Selected Carbon Steel, these soild one piece vices are fully hardened (45-50 HRC) and tempered to ensure stability and durability.


Accuracy:

  • Parallelism : 0.015 max (15 Microns)
  • Perpendicularity : 0.015 max (15 Microns)/ul>


Construction:

Manufactured from Tool Steel Body, these soild one piece vices are fully hardened (52-60 HRC) and tempered to ensure stability and durability.


Accuracy:

Parallelism : within 8 microns


Specifications

CODE 771, 771T
Size In Inches 3 4
Width of Jaws (in mm) 76 95
Depth of Jaws (in mm) 40 45
Opening of Jaws (in mm) 82 105
Overall Length (in mm) 200 235
Overall Height (in mm) 70 90
Weight (app. in Kgs) 5200 9700

Tool Makers Precision Screw Less Vices

Tool Makers Precision Screw Less Vices

APEX Code SG 772,772T(Tool Makers Precision Screw Less Vices)
Features:

  • The rapid positioning notches allow the vice to be locked in any position by means of an allen key provided with the vice.
  • Vee grooves in the sliding jaw, both horizontal and vertical, facilitate holding of round jobs.
  • Jaw pressure on work piece is forward and downward for repeatable positioning and maximum holding power.


Application:

The vices are particularly suitable for erosion work.

Construction:

Manufactured from Selected Carbon Steel, these soild one piece vices are fully hardened (45-50 HRC) and tempered to ensure stability and durability.


Accuracy:

  • Parallelism : within (15 Microns)
  • Perpendicularity : within (15 Microns)


Construction:

Manufactured from Tool Steel Body, these soild one piece vices are fully hardened (52-60 HRC) and tempered to ensure stability and durability.


Accuracy:

Parallelism : within 8 microns


Specifications

CODE 772, 772T
Size In Inches 3 4
Width of Jaws (in mm) 75 97
Depth of Jaws (in mm) 40 50
Opening of Jaws (in mm) 105 130
Overall Length (in mm) 74 94
Overall Height (in mm) 196 245
Weight (app. in Kgs) 4 8

APEX Code 750 Swivel Angle Table

APEX Code 750 Swivel Angle Table

Features:

These Tilting Angle Tables are available in a range of sizes. They are designed primarily of simple, quick angle adjustment and angle setting on Drilling and Milling Machines.


Finish:

Wrincle Black.


Specifications

CODE 750
Size In Inches 5x6 6x8 8x10 10x12 12x15
Size of Table (in mm) 125x150 150x200 200x250 250x300 300x375
Height Overall (in mm) 110 130 165 210 230
T-Slot Size (in mm) 13 13 13 16 16
Weight (in mm) 6.5 11.5 23 42 17

APEX Code 781 (Micrometer Stand)

APEX Code 781 (Micrometer Stand)

Features:

  • An indispensable clamping device for precise and stable measurements, it is most useful to speed up production and quantity inspection jobs.
  • Both clamping and positioning of the micrometer is achieved using a single clamp.
  • It is highly useful for sorting parts in batch inspection and for incoming inspections purposes.
  • The Stand allows the micrometer to be mounted in a stable manner for accurate undisturbed reading.


Construction:

The body is made of close grained cast iron precisely machined to close accuracies.


Finish:

Powder Coated.


Specifications

CODE 781
Base Dia (in mm) 110
Height (in mm) 100
Weight (app in Kgs) 1.5

APEX Code 774 (High Grip Machine Vice Swivel Model )

APEX Code 774 (High Grip Machine Vice Swivel Model )

Features:

  • manufactured To consistant accuracy to give prolonged reliable service
  • Total enclosed design prevents the ingress of foreign matter and damage to the screw and nut.
  • Swivel base gradually fully 360°
  • Spares Readily available
  • Tenon Slots in slide and swivel base
  • Available as plain and swivel ingress.


Construction:

  • High stress tensile stress Relieved quality casting, precision ground hardened and tempered steel jaws plate.
  • ACME Thread interchangeable screw,Stell nut contained in total enclosed sliding jaws.
  • Complete with steel handle


Finish:

  • CODE 774,774P -- Amazon Green
  • CODE SG 774,SG 774P -- Hammer tone metallic Blue


Specifications

CODE 774
Size In Inches 6
Width of Jaws (in mm) 160
Depth of Jaws (in mm) 52
Opening of Jaws (in mm) 150
Overall Length (in mm) 650
Overall Height (in mm) 160
Overall Width (in mm) 260
tenon Slot Size(in mm) 20
Weight (app. in Kgs) 54

APEX Code 774P (High Grip Machine Vice Plain Model )

APEX Code 774P (High Grip Machine Vice Plain Model )

Features:

  • manufactured To consistant accuracy to give prolonged reliable service
  • Total enclosed design prevents the ingress of foreign matter and damage to the screw and nut.
  • Swivel base gradually fully 360°
  • Spares Readily available
  • Tenon Slots in slide and swivel base
  • Available as plain and swivel ingress.


Construction:

  • High stress tensile stress Relieved quality casting, precision ground hardened and tempered steel jaws plate.
  • ACME Thread interchangeable screw,Stell nut contained in total enclosed sliding jaws.
  • Complete with steel handle


Finish:

  • CODE 774,774P -- Amazon Green
  • CODE SG 774,SG 774P -- Hammer tone metallic Blue



Specifications

CODE 774P
Size In Inches 6
Width of Jaws (in mm) 160
Depth of Jaws (in mm) 52
Opening of Jaws (in mm) 150
Overall Length (in mm) 600
Overall Height (in mm) 115
Overall Width (in mm) 240
tenon Slot Size(in mm) 20
Weight (app. in Kgs) 42

APEX Code 773 (Extra Grip Machine Vice Swivel Model )

APEX Code 773 (Extra Grip Machine Vice Swivel Model )

Features:

  • Manufactured To consistant accuracy to give prolonged reliable service
  • Swivel base gradually fully 360°
  • Tenon Slots in slide and swivel base
  • Available as plain and swivel ingress.


Construction:

  • High stress tensile stress Relieved quality casting, precision ground hardened and tempered steel jaws plate.
  • ACME Thread interchangeable screw,Stell nut contained in total enclosed sliding jaws.
  • Complete with steel handle


Finish:

  • 773,773P -- Amazon Green
  • SG 773,SG 773P --SG Ductile Iron Body
  • Hammer tone metallic Blue


Specifications

CODE 773
Size In Inches 6
Width of Jaws (in mm) 160
Depth of Jaws (in mm) 50
Opening of Jaws (in mm) 200
Overall Length (in mm) 540
Overall Height (in mm) 190
Overall Width (in mm) 180
tenon Slot Size(in mm) 20
Weight (app. in Kgs) 47

APEX Code 773P (Extra Grip Machine Vice Plain Model )

APEX Code 773P (Extra Grip Machine Vice Plain Model )

Features:

  • Manufactured To consistant accuracy to give prolonged reliable service
  • Swivel base gradually fully 360°
  • Tenon Slots in slide and swivel base
  • Available as plain and swivel ingress.


Construction:

  • High stress tensile stress Relieved quality casting, precision ground hardened and tempered steel jaws plate.
  • ACME Thread interchangeable screw,Stell nut contained in total enclosed sliding jaws.
  • Complete with steel handle


Finish:

  • 773,773P -- Amazon Green
  • SG 773,SG 773P --SG Ductile Iron Body Hammer tone metallic Blue


Specifications

CODE 773P
Size In Inches 6
Width of Jaws (in mm) 160
Depth of Jaws (in mm) 50
Opening of Jaws (in mm) 200
Overall Length (in mm) 540
Overall Height (in mm) 150
Overall Width (in mm) 170
tenon Slot Size(in mm) 20
Weight (app. in Kgs) 40

SG701 - Tilting & Swiveling Vice

SG701 - Tilting & Swiveling Vice

Features:

  • Manufactured to consistent accuracy to give prolonged reliable service.
  • Bearing Surface Precision ground. Flatness within 0.0012" (30 microns).
  • Once locked impossible to shift.
  • Totally enclosed acme screw with three point location of operating in Manganese Bronze Nut.
  • Tenon Slot machined in back as standard for CNC use.
  • Swivel base graduated through 360º.
  • Vertical Tilting Capacity 90º.


Application:


Suitable for Milling - Grinding - Shaping- Drilling and Jig Boring.


Construction:


These Vices are manufactured from close grained Hi Tensile seasoned Cast Iron.


Jaws:


Fully hardened (50±3 HRC) and ground tool steel jaws with parallelism within 0.0012" (30 microns).


Spindle:


Precisely cut ACME threads with pitch most suitable for firm gripping and smooth operations.


Nut:

Hot stamped manganese bronze nut contained in totally enclosed sliding jaws.


Fasteners:


  • All fasteners used in the vices are grade 10.8 which provide extended strength and rigidity to these vices.
  • Supplied Complete with Steel Handle.


Finish:

Amazon Green - Code SG701: SG Ductile Iron Body


Finish:

Hammer tone metallic blue.


Specifications :

 

CODE 701
Size In Inches 4 6 8
Width of Jaws (in mm) 100 150 200
Depth of Jaws (in mm) 40 50 60
Opening of Jaws (in mm) 100 150 200
Overall Length (in mm) 345 510 620
Overall Height (in mm) 150 200 230
Overall Width (in mm) 180 250 280
Tenon slot size(in mm) 16 20 2
Weight (app. in Kgs) 19 42 76

Product Code: 701

3 Way Universal Tilt & Swivel Angle Vice

3 Way Universal Tilt & Swivel Angle Vice

Features:

APEX 3 Way Universal Tilt & Swivel Angle Vice can tilt +45° and Circle 360°, and has all the built strength and rigidity associated with APEX Vices.


Finish:

Amazon Green.


Specifications :



CODE 730
Size In Inches 4 6
Width of Jaws (in mm) 100 150
Depth of Jaws (in mm) 40 55
Opening of Jaws (in mm) 100 150
Overall Length (in mm) 390 545
Overall Height (in mm) 195 310
Overall Width (in mm) 230 275
Tenon Slot Size (in mm) 20 20
Weight (app. in Kgs) 30 65

Product Code: 730

APEX Code 767 (Indexing Milling Fixture) (Size : 4", 6")

APEX Code 767 (Indexing Milling Fixture) (Size : 4", 6")

Features:


  • This is similar to Code766 but provided with 3 jaws self centring true chuck with reverse jaws for holding any diameter upto chuck capacity.
  • Indexing Can Be carried Our Directly by 360 graduated collar as well as by index plate and finger.


Finish:

Hammer tone mid grey.


Specifications :


CODE 767 (4") 767 (6")
Over All Length(in mm) 320 320
Overall Width(in mm) 230 230
Graduation 360 360
Distance Between Slots 295 295
Chuck Size (in mm) 100 160
Chuck Hole (in mm) 22 40
Weight (app. in Kgs) 18 23

To,Shree Traders

Promote Your Business with IndiaMART
Enter Your Website URL
RELATED COMPANIES