Oil Chemicals

BWT MB – 111 is used for Boiler water softening and
Project the inner surfaces against Calcium , Magnesium
and iron, which is commonly occur as waterborne
impurities .

Application : BWT MB -111 is special blend of advanced chemicals designed for boiler feed water (Raw & Soft )

Product Used : To prevent : Scale formation Corrosion Sludge Accumulation Foaming

Product data : Appearance - Dark Brown Liquid Ph - 12 to 14

Solubility - Soluble in water

Dosage : The Dosage of the chemical will be introduced by our

Technical Personnel on the basis of feed water parameters and the system

 

Packing : BWT MB -111 is supplied HDPE carboys 35 – 50- 65 Kgs.

Handling Storage ; Avoid contact with skin and eyes. Water goggles and pvc gloves when handling. If eyes are affected, they should be wash with Fresh water for at least 15 minutes and consult a doctor immediately. Keep BWT MB-111 away from Acids.

 

Our Product Reduce Downtime & Extend Production & Equipment Life
Losses in Boiler Due to Scale and corrosion as per “ ABMA”
 

• Loss of Metal and alloys
• Loss of product, Time and Energy
• Loss of manpower due to shut downs

Thickness of scale   Increase in fuel Consumption due to

  ½ mm                            2 %  

  1 mm                             4 %

  2 mm                              6 %

BWT MB – 111 is used for Boiler water softening and
Project the inner surfaces against Calcium , Magnesium
and iron, which is commonly occur as waterborne
impurities.

Application : BWT MB -111 is special blend of advanced chemicals

designed for boiler feed water (Raw & Soft )

Product Used : To prevent : Scale formation

Corrosion

Sludge Accumulation

Foaming

Product data : Appearance - Dark Brown Liquid

Ph - 12 to 14

Solubility - Soluble in water

Dosage : The Dosage of the chemical will be introduced by our

Technical Personnel on the basis of feed water

parameters and the system

Packing : BWT MB -111 is supplied HDPE carboys 35 – 50- 65 Kgs.

Handling Storage ; Avoid contact with skin and eyes. Water goggles and

pvc gloves when handling. If eyes are affected, they

should be wash with Fresh water for at least 15 minutes

and consult a doctor immediately. Keep BWT MB-111

away from Acids.

Our Product Reduce Downtime & Extend Production & Equipment Life

Losses in Boiler Due to Scale and corrosion as per “ ABMA”
Loss of Metal and alloys
Replacement cost
Loss of product, Time and Energy
Loss of manpower due to shut  downs

Thickness of scale	Consumption due to Increase in fuel scale
½ mm	2.00%
1 mm	4.00%
2 mm	6.00%

FST MB 400 : Fuel Oil Additive has been use in all kind of liquid fuel like as

Furnace Oil, Light Diesel Oil, SKO,.

Following Benefits of FST MB 400 Fuel Additives :

1. Sludge formation is minimized.

2. Atomization of fuel is prevented.

3. Clogging of fuel lines and filters is prevented.

4. Deposits on burner nozzles are eliminated.

5. Flame is stable, hotter and in the required direction.

6. Combustion is catalytic ally improved.

7. Soot formation is reduced.

8. Fireside deposits are eliminated.

9. Heat transfer is improved.

10. sodium and vanadium in the fuel are neutralized.

11. Formation of sulfur peroxide is prevented and corrosion is inhibited.

12. Control temperature of stack.

13. Carbon monoxide, Oxygen and Unborn Hydrocarbons in the stack gases minimized while carbon dioxide in stack gases is increased.

14. Frequent cleaning, maintenance and overhaul are not required.

15. Fuel consumption is reduced by 2-5%.

FST MB – 400

What is FST MB – 400 Fuel oil additive ?

FST MB 400 : Fuel oil Additive is a liquid blend of organic chemicals in a petroleum base. The ingredients of FST MB 400 : Fuel oil additive includes detergents, combustion catalyst, and chemicals. FST MB 400 : Fuel oil additive is easily and fully compatible with all varieties of fuel oil It can be used to treat fuels like furnace oil, SKO, light Diesel oil, and Naptha with equal benefits.

Why is FST MB – 400 : Fuel oil Additive to be additive added before transferring fresh fuel to the tank?

It is advised that FST MB 400 : Fuel oil additive be added be to the main storage tank just before fresh fuel is transferred to it because the agitation caused by the transfer of the fuel to the is tank is enough for the additive to get homogeneously mixed in the fuel oil.

FST MB 400 : Fuel oil additive are accumulative. The longer the hydrocarbon molecules remain in contact with the active ingredients of Residuumsol : Fuel oil additive, the more they are modified and are conditioned to burn easily and efficiently.