Mild Steel Products

We offer the finest quality MS Angles, which are extensively used in fabrication industry. The dimension is determined by the length and the thickness of the two sides. The most commonly found steel angles are formed at a 90 degree angle and has two legs of equal length. The sides are either equal or of different sizes, if one leg is longer than the other then it is known as UNEQUAL angle. The steel angles of various strength like HT (High Tensile)/MS are formed as required by different applications. These products are used in bracket, trimming, transmission line, framing and reinforcement. Our company also stocks and supplies Tower sections against orders of clients.

Specifications: 25x25x3/5/6 - 200x200x12/16/20

Sizes and Grade: All Sizes and Grades available

We offer the finest quality MS Beams, Joists, Girders which is the most sought after sections by the structural engineers, architects and construction companies all over the world. With infrastructure development playing the lead in today’s global scenario Indian engineers and architects are exploring better options to go beyond the conventional norms and to win over the challenges of modern constructions. They are widely used in Industrial Buildings, Multi Storey Building, Road Bridge composite construction, Industrial structures Railways, Ports and Harbour, Offshore Drilling Rigs and in addition to above mentioned utilities, MS Beams/Joists are used in Heavy machinery, industrial boilers, wagon tippers, feeders, stackers, crushers, loaders, cranes, shipping industry and supporting frames for equipment used in metallurgical and other heavy industries.

Specifications: 100x50 – 600x210

Sizes and Grade: All Sizes and Grades available.

We offer Flats which are basically thin strips of mild steel with the thickness of the strip varying commonly from 8mm to 100mm though thicker flats are also available. MS Flat bars may be considered the most basic of steel structures. Its applications range from construction to machine fabrication. These flats are rolled in low temperature which imparts higher strength to the structures.

Specifications: 12mm (Width) – 300mm (Width) x 3mm (Thick) – 32mm (Thick)

Sizes and Grade: All Sizes and Grades available

We also offer MS Rounds and Bright Bars. Bright Bars are steel or metal bars that are produced by one or more cold finishing processes. The processes outlined below are known as Cold Finish processes or the end products are known as cold finished because there is no or very little heat applied in the entire operation of converting them from hot rolled bars (also known as black bars) to Cold Finished Bars or Bright Steel Bars.

Cold Drawing: Hot Rolled Bar is descaled, pulled through Tungsten Carbide or High Speed Steel Die, straightened & cut-to-length; Improves dimensional tolerance and shape, straightness, surface finish, strength and machinability.

Turning and Polishing: Remove bar surface of Hot Rolled Bars with revolving cutting tool, rotate bar through rolls to straighten and polish, then cut-to-length. Improved dimensional tolerances and removes surface defects and decarburization.

Grinding: Abrasive wheel grinds off surface metal. Improves surface finish and achieves very close dimensional tolerances.

Cold Rolling: Descaled, pass through series of rolling stands, strengthening and cut-to-length. Improves dimensional tolerance and shape, surface finish and strength

They are widely used in Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Daily Equipments, Surgical & Medical Parts, Thread Bars, Studs, Bolts, Pins, Hinges and Handles.

We can supply Bright Bars in the following sections

• Cold Drawn (Rounds, Hexagons, Flats, Squares)
• Drawn and Ground Bars (Rounds)
• Peeled Bars (Round)
• Turned Bars (Round)

Sizes and Grade: All Sizes and Grades available

We offer the finest quality MS Channels and Columns, which are extensively used in fabrication industry. A channel is a right angle "C" section. They are also called C Channels. Along with beams, channels are mainly used in structural applications. Mostly MS Channels are used as supports and guide. These are roll-formed products. MS Channels are usually applied in the automotive industry as well as heavy machinery industries. Generally, there are 3 types of mild steel channel,

They are:

• Plain Channels,
• Lipped Channels &
• Universal Channels.

Our range of MS Channels is available in different sizes and dimensions and can also be customized as per the requirements of our clients.

Specifications: 75x40 – 400x100

Sizes and Grade: All Sizes and Grades available.