We offer our customers with quality binder varnishes which are known for their high flexibility retention. Used for polyester film-glass-mica tapes, these have the following specifications based on their types:

Elmo 799	Isophthalic alkyd	231	60-80	120/15 min	120(E)	High flexibility retention after ageing	Binder varnish for polyester film-glass-mica tapes
Eimoglas V172	Polyurethane	218	20-30	155/30 min (initial coat) 155/60 min {final coat)	155(F)	Hydrolytic stability, quick drying, flexible	Impregnation of glass fibre sleevings, tapes also binder varnish for glass-fibre covered wires
Eimoglas V 132-48 A	Epoxy	218	30-40	300-400/ <3 min	155(F)	Good bonding & flexibility	Binder varnish for glass-fibre covered wires
Elmoglas H69 A	Polyesterimide	218	50-65	300 - 400/ <3 min	180(H)	High flexibility retention after ageing	Binder varnish for polyester film-glass-mica tapes, GFCC

We offer our clients with high performance oriented varnishes. Available in two types finishing varnishes and core plate varnishes, these are considered useful for finishing coat on overhangs of stators & rotors, coating lamination of motors, transformers, hydro generators, respectively. With the distinct property of air drying and insulation resistance, these have the following specifications:

Product Designation	Chemical Base	Thinner	Viscosity at 23°C by DIN 53211 / Cup 4 (s)	Curing Cycle {...°C/...h)	Suitable for Thermal Class	Distinctive Properties	Suggested Applications
Becktol (Red)	Alkyd	234	50 -160	RT/24	120 (E)	Air drying, anti-tracking, red pigmented	Finishing coat on overhangs of stators, rotors etc.
Becktol (Grey)	Alkyd	234	50-170	RT/24	120 (E)	Air drying, anti-tracking, grey pigmented	Finishing coat on overhangs of stators, rotors etc.
Varnish F93 (Red)	Polyesterimide	217	15-16	RT/24	180 (H)	2K, RT cured high heat resistance, anti-tracking, red coloured	Finishing varnish for turbo generators, traction motors, etc.
CORE PLATE	VARNISHES
CPV 4000	Alkyd phenolic	205	45-65	350 - 450 / 1-2 min.	130 (B)	Good adhesion,	Coating lamination of motors, transformers, hydrogenators etc.
ISONEL CPV	Alkyd phenolic	CPV	115-145	350-450/ 1-2 min.	155(F)	punching quality & insulation resistance

We provide our customer with premium quality impregnating varnishes which are used for impregnation of high speed motor armatures. In addition, it is also used for drives in chemical industry and hand tools etc. Known worldwide for their excellent resistance to centrifugal forces. These have the following specifications:

Product Designation	Chemical Base	Thinner	Viscosity at 23°C by DIN 53211/ Cup 4 (s)	Curing Cycle (,..°C/ ...h)	Suitable for Thermal Class	Distinctive Properties	Suggested Applications
Elmo 65 E/R	Alkyd phenolic	205	40-60	130/8	130 (B)	Excellent resistance to centrifugal forces	Impregnation of high speed motor armatures, drives in chemical industry, hand tools, etc.
Elmo B 92	Alkyd	234	40-60	120/4	130 (B)	Flexible cured film. Short curing schedule	Impregnation of fan stalors
Elmo B 95	Alkyd phenolic	205	40-60	130/6	130(B)	Short curing schedule	Impregnation of motor stators, transformers, etc.
Elmoglas V 155	Polyurethane	218	45-65	140/14	130(B)	Resistant to refrigerant R11 SR22	Impregnation of hermetic motor stalors, binder varnish for glass fiber tapes & sleeves.
Elmotherm F 50	Isophlhalic alkyd	205	50-70	120/12	155 (F)	Excellent dielectric properties under moist condition, good bond and adhesive strength	Impregnation of motor stators, rotors, generators, Aux. Traction motors etc.

We offer our customers with cold curing epoxy systems which have high adhesive strength. These are used for casting and potting of electrical and electronic circuits and cable jointing application. Its specifications are:

COLD CURING EPOXY SYSTEMS
Dobeckot 503 C	Hardener 758	-	100:10	620	25/45	24/RT	Medium viscosity, fast curing	Casting & Potting of electrical & electronic circuits
Dobeckot 504	Hardener 758	-	100:10	300	25/58	24/RT	Low viscosity, fast curing	Casting & Porting of electrical & electronic circuits
Dobeckot 520 F	Hardener EH 411 Hardener 758	-	100:55 100:10	11800 1540	25/72 25 /27	48/RT 24/RT	High Viscosity, long pot life, high adhesive strength Good electrical insulation & chemical resistance	General purpose adhesive electronic circuits Chemical resistant binder for FRP general purpose, fast curing adhesive
Dobefil 60 / Dobefil 60 (Black) Dobeckot 5503/Dobeckot 5504 Dobeckot 5505	Hardener EH 408 Hardener 7055	- 803 M	100:25 100:50 :0.5	2150 240 (At 60C)	25 /135 60/180-240	48/RT 2/80 3/105	Low exotherm, flexible cured mass, long pot life Low viscosity Low viscosity Long pot life	Casting & potting of electrical and electronic circuits and cable jointing application Casting & potting of High voltage ignition coil

We offer our clients with high quality impregnating resins which are solvent less are used for transformers, motors, alternators, etc. These are available in four types:

• Impregnating Resins (Dobeckan)
• Impregnating Resins (Dobeckot)
• Trickle Impregnating Resins (Dobeckan)
• Trickle Impregnating Resins (Dobeckot)

With excellent bond strength, these have the following specifications:

IMPREGNATING RESINS (Dobeckan)
DobeckanFT1052 Dobeckan FT 1052 K2	P K2	100:01:00 480-520	100/40-55 100/30-45 6	2/140 180(H)	Solventless, Impregnating resin, UL recognized under file No.: E 73288 Transformers, Large Motors, H.V.Ignition coil
Dobeckan FT 2005/500 EK	-	- 480-520	120/20-40 6	4/160 200 (C)	Solventless, Single component, UL recognized under file No.: E 73288 Transformers, HT motors, traction motors.
Dobeckan FT 2015 / 90 P	P	100 :15 85-95	120/15-25 4	1/150 200 (C)	Solventless, Structured viscosity, UL recognized under file No.: E 73288 Transformers, HT motors, traction motors.
Dobeckan FT 2015/90 EK	-	85 - 95 (S) [*]	120/16-24 4	1/150 200(C)	Solventless, Single component, UL recognized under file No.: E 73288 Wind mill generators, transformers, HT motors, alternators
Dobeckan F 2504/E Dobeckan F 2505	P K2	500 - 700(2) 55-65(1)	100/30-40 4 100/20-30 4	2/140 155 (F) 2/140 155(F)	Impregnation of open type ballasts Impregnation of open type ballasts

We provide our customer with abrasion resistant industrial flooring in diverse range of shades. Used for coloured coating of concrete floors in engineering and automobile industry and light to heavy duty flooring, these have the following specifications:

Trade Designation	Mixing ratio R : H (Parts by weight)	Viscosity of mixture at 25 C (mPa.s)	Pot Life (.. C.roin)	Distinctive Properties	Suggested Applications
INDUSTRIAL FLOORING
Beck Bond EC 36 (. .)	EC36:SLF36B	100:30:00	45/75	Two-component epoxy resin based flooring system. Abrasion resistant. Available in various shades	Highly abrasion resistant, coloured coating for concrete floors in industries like automobile, engineering workshops
Beck Bond EPC 36	EPC36R:EPC 36H	100:25:00	45/75	Two-component epoxy resin based flooring system. Abrasion resistant. Available in various shades	Highly abrasion resistant, coloured coating for concrete floors in industries like automobile, engineering workshops
Beck Bond AS 45	100. 156	500 - 700	25/60	Epoxy resin in aqueous emulsion excellent antistatic property.	Used as a antistatic floor coating in electrical and electronic assembly areas, computer rooms Beck Bond SLF 36 AS to be used as (op covering

We provide our customers with efficient waterproofing which is specially formulated white coloured water based primer which is very useful for waterproofing of old and new built roofs. Some of its application area are:

• Water proofing balconies
• Water proofing terrace
• Water proofing gardens

WATERPROOFING
Beck Bond WEP21	100:200	25-20	30/60	Specially formulated, white coloured, water based Epoxy Primer	For epoxy, polyurethane coating & flooring as well as waterproofing systems
Beck Bond WPC30	-	Paste	-	a white, elastomeric, high build coating for waterproofing of old and new built up roofs	Roof slabs, terraces, balconies, chajjas, parapet walls, old and new surfaces, vertical as well as horizontal surface. Structures having complicated shells, folded plates, para bolides, corrugated sheets, etc. Structures exposed to marine or saline atmosphere
BeckProofWAC	100 : 200 (Chemical Cement)	200-600	25 /15-20	an acrylic based polymer modified cementitious coating systems a milky White liquid which in combination with cement has excellent waterproofing and protection properties.	Waterproofing terraces, balconies and terrace gardens. To stop leakages from toilet units and sunken slabs. Water proofing damp walls. Arresting leakages in storage tanks & reservoirs. Waterproofing of chajjas & Canopies. Providing protection to exposed reinforcement general concrete repairs.
Beck Bond Aquaproof	0.2 to 0.25 % by weight of cement	-	-	Integral waterproofing admixture for concrete	For structural concrete of water retaining structures. Slabs, sunk slabs.