Single Bottom Reversible Plough has been designed and developed in Heavy Duty models to perform primary tillage operations satisfactory at any soil conditions providing deep opening and loosening of the soil. It can be attached easily to a tractor through three point linkage and operated with the help of tractor hydraulic Usage of heavy duty main shaft, wear hardening technology in clutch box & special manganese steel share points increases the life of the plough.The plough can cut thrash and buries it completely as well as it can cut heavy soil clods into small particles and give complete inversion of the soil.

Special features :

• Developed first time with Heavy Duty Models in India
• Heavy Duty 100 mm main shaft used in Heavy Duty Models
• Extra Heavy Ribbed Tynes used in Heavy Duty Models to provide higher strength to tines.
• Work Hardening technology in clutch Box and Arc Lever for longer life.
• Lower cost of maintainance.
• Lesser load to tractor and lesser fuel consumption.
• Hardened spring steel cutting blades used for wear resistance and longer life.
• Special Manganese steel points used to provide wear resistance to points.
• Easy to attatch to tractor with Three point linkages.
• Automatic furrow change system and can be operated easily.
• It can be used for ploughing as well as general purspose at level lands and even in strip farming at hilly areas.
  

MODELS & SPECIFICATIONS:

MODELS & H.P. OF THE TRACTORS	PARTICULARS	CUTTING DEPTH in mm.	CUTTING WIDTH in mm.	WEIGHT in Kgs.
CHETAK SPECIAL (For 35 HP & AboveTractors)	Used 100 mm shaft and Heavy Duty Tines	410	450	250
ECONOMY (For 35 HP to 40 HP Tractors)	Used 80 mm shaft and Medium Duty Tines	350	425	225
ROYAL-25 (For 23 HP to 35 HP Tractors)	Used 80 mm shaft and Medium Duty Tines	325	325	190
RAJA-18 (For 18 HP to 22 HP Tractors)	Used 70 mm shaft and Medium Duty Tines	190	275	110

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice. 

Two Bottom Reversible Plough has proved its excellent performance in its primary tillage operations by cutting clods much satisfactorily with very deep penetrations into the soil. With continous improvements since decades with a extra heavy 90 mm shaft and sturdy frame construction plough operates satisfactorily at heavy and varying soil conditions. Spring steel hardened cutting blades and share points easily break heavy clods, uproot crop residue and buries them completely giving a leveled land.

Special Features:

• Developed in heavy and extra heavy models for the first time in India.
• Easy to attatch to the tractors with three point linkages.
• Extra heavy 90 mm main shaft used.
• Automatic furrow change system and can be operated easily.
• Easy to maintain and lower cost of maintainance.
• Hardened spring steel cutting blades and share points used for longer life.
• Lesser load to tractors and lesser fuel consumption. 
• It can be used for ploughing as well as general purpose at level lands and even at strip farming at hilly areas.

MODELS & SPECIFICATIONS:

MODELS & H.P. OF THE TRACTORS	PARTICULARS	CUTTING DEPTH in mm	CUTTING WIDTH in mm	WEIGHT in kgs
Classic-35 (For 35 HP to 44 HP)	90 mm shaft used	305 to 360	635 to 660	350
Hi-Tech- 45 ( For 45 HP to 49 HP)	90 mm shaft used	310 to 385	660 to 690	360
Delux-50 ( For 50 HP to 54 HP)	90 mm shaft used	325 to 410	690 to 715	370
Premier – 55 (For 55 HP to 59 HP)	90 mm shaft used	360 to 435	715 to 740	390
Unique- 60 (For 60HP & Above)	90 mm shaft used	370 to 460	765 to 810	400

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.

Offset Disc Harrow is tractor hydraulic operated implement which trails behind the tractor and effectively breaks up clods with deeper penetration due to its heavy weight and design. Both disc gangs are offset at an angle to ensure no soil remains uncut and heavy crop residue with organic matter is effectively buried. Provision of handle screw enables it for the adjustment of inclination required  for the disc penetration depth hence suitable for different cutting depths for varying soil conditions. Heavy duty sturdy mainframe with heavy duty spools and hardened discs ensure proper centerweight and longer life.

Special features :

• Sturdy Mainframe and design.
• Handle Screw arrangement for cutting depth adjustment.
• Hardened sharp edged discs to ensure proper cutting of roots and clods.
• Easy to mount on tractor with three point linkages and easy to operate.

Models & Specifications :
 

MODELS	PARTICULARS.	LENGTH in mm.	WIDTH in mm.	HEIGHT in mm.	PLOUGHING CAPACITY in mm.	WEIGHT in Kgs.
12 DISC  DH-HD	WITH BALL BEARINGS FOR 35 HP TO 45 HP TRACTORS	2100	1500	1371	1250	355
14 DISC DH-HD	WITH BALL BEARING FOR 46 HP TO 60 HP TRACTORS	2130	1803	1371	1450	410

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.
 

Reverse Forward Leveler is ideal for leveling, filling, back filling and farmyard cleaning etc. Provision for usage in front as well as reverse direction ensures satisfactory front and back filling and leveling of the land. Sharp edged hardened blades cuts weeds, clods, thrashes and uneven lands easily performing above expectations.
 
Special features :

• Sturdy main frame to resist heavy tensile loads.
• Thicker sheets to provide tearing resistance.
• Sharp edged hardened blades for easy cutting.
• Easy to mount on tractor by three point linkages and easy to use.
• Readily available spare parts and easily interchangeable.

Models & Specifications :
 

MODEL	WIDTH in mm.	LENGTH in mm.	HEIGHT in mm.	WEIGHT in Kg.
RFB	1850	770	1125	180

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.

Single Bottom Fixed Plough is tractor hydraulic operated implement has been designed with heavy sturdy main frame to provide to satisfactory cutting width and depth at any type of soil conditions with lesser load on tractors. It is widely used in Agriculture as well as Horticulture especially in Grape yards.
Special features:

• No maintenance cost
• No load to tractors
• Easy to mount on tractors with three point linkages
• Easy to operate
• Spares readily available & easily interchangeable

Models & Specifications :
   

MODELS	SPECIFICATIONS	CUTTING DEPTH in mm.	CUTTING WIDTH in mm.	WEIGHT in Kgs.
SFMBP-  L. D	FOR 18 HP TO 35 HP TRACTORS	300	304	140
SFMBP-  H. D	FOR 36 HP TO 50 HP TRACTORS	350	406	275

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.

Two Bottom Fixed Plough are tractor drawn conventional implement being widely used for primary tillage operations.It can perform toughest ploughing jobs by cutting heavy thrash and burying it completely with deeper penetrations at any hard soil conditions. Extra heavy duty sturdy mainframe construction and usage of wear resistant shares with hardened steel bar points ensure longer life to the plough. These ploughs can be easily attached to a tractor through 3 point linkages and operated with help of tractor hydraulic.

Special Features

• No maintenance cost
  
• No load to tractors
• Easy to operate
• Spares readily available and easily interchangeable
  

Models & Specifications :

MODELS	SPECIFICATIONS	CUTTING DEPTH in mm.	CUTTING WIDTH in mm.	WEIGHT in Kgs.
35 HP HD	FOR 25 HP TO 35 HP TRACTORS	300	600	200
50 HP HD	FOR 36 HP TO 50 HP TRACTORS	350	660	230
60 HP HD	FOR 51 HP TO 60 HP TRACTORS	400	710	250

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice. 

Three Bottom Fixed Plough is a tractor drawn implement that comes with sturdy heavy main frame to provide primary tillage operations at varying soil conditions quickly and economically. Being available in two different models Light duty model is used for Farming especially for Horticulture and Grape yards where as Heavy duty model can be used in Agriculture at varying soil conditions.

Special Features :

• No maintenance cost
  
• Easy to mount on tractors with three point linkages
• Easy to operate
• Spares readily available & easily interchangeable

Modes & Specifications:

MODELS	SPECIFICATIONS	CUTTING DEPTH in mm	CUTTING WIDTH in mm	WEIGHT in kgs
35 HP L.D	FOR 18 HP TO 35 HP TRACTORS	250	650	165
45 HP H.D	FOR 45 HP & ABOVE TRACTORS	300	1050	325

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.

Four Bottom Fixed Plough  is a tractor hydraulic operated implement and has been designed for ploughing and farming in smaller sized fields.Provision of sturdy main frame makes it suitable for varying soil conditions giving the complete inversion of the soil satisfactorily for different kind of crops. It is widely used for farming especially in Grape yards and Horticulture. 

Special Features :

• No maintenance cost.
• Easy to mount on tractors with three point linkages.
• Easy to operate.
• Spares readily available & easily interchangeable

Models & Specifications :
   

MODEL	SPECIFICATION	CUTTING DEPTH in mm	CUTTING WIDTH in mm	WEIGHT in Kgs
4 FURROW   M.B. PLOUGH – L D	FOR 25 HP TRACTORS TO 40 HP TRACTORS	250	850	195

 
As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.

Spring Cultivator has been designed to deliver sturdy performance at varying soil conditions. Heavy duty channel mainframe and tine assembly resist heavy bending strains. Heavy duty dual springs retain their strength for longer life and ensure safety of shovels from heavy obstacles.

Special features:

• Heavy duty channel used sturdy frame to withstand heavy loads, bending stresses and strains.
• Thicker tines to restrain sudden impact loads.
• Positive projection angle of tines to give easier and deeper penetrations with effective uprooting of crop residue and cutting of heavy soil clods.
• Dual Springs to provide high tensile strength to each tine to safeguard during heavy shock loads and impact loads.
• Sharp edged Reversible shovels that gives deeper penetrations at any soil conditions and can be reversed and used on the other side after complete wear of one side.
• Provision for spacing adjustments between tines to be useful for various soil conditions and various crops.

Models & Specifications :
 

MODEL	PARTICULARS	LENGTH in mm	WIDTH in mm	HEIGHT in mm.	ASSEMBLED ROW WIDTH in mm.	UNDER FRAME CLEARANCE in mm.	WEIGHT in Kgs.
9 TINE HD	FOR 35 HP TO 50 HP TRACTORS	2060	763	1100	235	540	275

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.

Rigid Cultivator is capable to withstand tough working conditions at heavy soils. With deep positive penetrations it can break up hard soil and uproot stubbles to leave the ground perfectly worked. With the spacing adjustments of tine on the frame it can be used for multiple no. of applications and even for paddy cultivation requiring shallow ploughing.

Special features:

• Heavy duty channel sturdy frame to withstand heavy loads, bending stresses and strains.
• Thicker tines to restrain from sudden impact loads.
• Sharp edged points to give easier and deeper penetrations with effective uprooting of crop residue and cutting of heavy soil clods at any soil conditions.
• Provision for spacing adjustments between tines to be useful for various soil conditions and various crops.
• Sharp edged Reversible shovels that gives deeper penetrations at any soil conditions and can be reversed and used on the other side after complete wear of one side.
• Can be used for uprooting after cutting crops or primary tillage Operations before Sowing.

Models & Specifications :
 

MODELS	PARTICULARS	LENGTH in mm.	WIDTH in mm.	HEIGHT in mm.	ASSEMBLED ROW WIDTH in mm.	UNDER FRAME CLEARANCE in mm.	WEIGHT in Kgs.
7 Tyne With  Shovels- Hd 7 Tyne With Duck  Foot-Hd	For 25 Hp To 35 Hp    Tractors	1433	605	1015	210	430	185
9 tyne with  shovels- hd 9 tyne with duck  foot-hd	For 36 Hp To 50 Hp Tractors	1843	605	1015	210	430	210

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.

Two Furrow Surry Ridger has been designed with a heavy and sturdy mainframe construction to resist heavy bending load acting on it during its operation with heavy duty furrows inclined at an effective angle such that it can penetrate to greater depths to give deep furrow openings and ridges. Adjustable wingspan enables it to vary furrow as well as width of ridges. Hardened share points uproots crop residues and obstacles easily and breaking clods effectively ensuring longer life. Provision for the adjustment of spacing between the furrows makes it useful for forming ridges suitable for various types of crops.
 
Special features:

• Heavy Duty sturdy mainframe construction.
• Heavy Duty furrows and effective inclination for deeper penetration.
• Adjustable wingspan suitable for varying sizes of surries.
• Provision of adjustment of spacing between furrows suitable for various types of crops.
• Hardened sharepoints to uproot residues and break clods easily. 

Models & Specifications :
 

NO. OF BASES	WIDTH in mm.	LENGTH in mm.	HEIGHT in mm.	WINGSPAN ADJUSTMENT in mm.	UNDERFRAME CLEARANCE in mm.	WEIGHT in Kgs.
2 Nos	1930	435	1175	560 to 725	570	175

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice. 

Three Furrow Surry Ridger  comes with a longer, heavy and sturdy mainframe construction to resist heavy bending loads acting during its operation covering wide land area with more surries and ridges. Heavy duty furrows have been provided and inclined at an effective angle such that it can penetrate to greater depths to give deep furrow openings and ridges. Adjustable wingspan enables it to vary furrow as well as width of ridges. Hardened share points uproots residues and obstacles easily and breaking clods effectively. Provision for the adjustment of spacing between the furrows makes it useful forming ridges suitable for various types of crops.

Special features :

• Longer mainframe to cover wide land area
• Heavy Duty sturdy mainframe construction.
  
• Heavy Duty furrows & effective inclination for deeper penetration
  
• Adjustable wingspan suitable for varied sizes of surries
  
• Provision of adjustment spacing between furrows suitable for different kinds of crops.
• Hardened sharepoints to uproot residues & break clods easily

Models & Specifications :

NO.OF BASES	WIDTH in mm.	LENGTH in mm.	HEIGHT in mm.	UNDERFRAME CLEARANCE in mm.	WINGSPAN ADJUSTMENT in mm.	WEIGHT in Kgs.
3 Nos	2235	435	1175	570	560 to 725	230

As continuous improvements are contemplated, the illustrations and descriptions are not binding. Manufacturers reserve right to discontinue or make change in above models without any prior notice.