Industrial Ferro Alloys

We offer nickel alloy, which is mainly used in chemical processing & electronics industry. Nickel alloy features corrosion resistance properties particularly to various reducing chemicals & especially to caustic alkalis. Nickel alloy also finds usage for maintaining product quality in many chemical reactions including at the time of processing foods and synthetic fiber products.

Specifications:

We offer following specifications according to various grades we provide to our clients:

1. LME Grade:

• Electrolytic Nickel Cathodes, Size 2"X2":

             Ni > 99.98%, Cu < 0.0001%, Fe <0.0005%
             Co < 0.0002%, C < 0.002%, S < 0.0002%

• Electrolytic Nickel Cathodes, Size 4"X4":

             Ni Co  > 99.93%, Co < 0.10%, Cu <0.02%
             Fe < 0.01%, C < 0.01%, S <0.0.001%

• Electrolytic Nickel Cathodes, Size Full plate:

                Ni Co  > 99.93%, Co < 0.10%, Cu <0.02%
                Fe < 0.01%, C < 0.01%, S <0.0.001%

2. Nickel alloy properties:

• High electrical conductivity
  
• High Curie temperature
  
• Good magnetostrictive properties
  

3. Nickel alloy is used for:

• Electronic lead wires
  
• Battery components
  
• Thyratrons
  
• Sparking electrodes

We offer electrolytic manganese metal, which is the purest form of manganese. electrolytic manganese metal is available in solid flakes form, it helps in meeting the specialized needs of customers around the world.

Physical & Chemical Properties of electrolytic manganese metal:

PHYSICAL STATE	Solid flakes
ODOUR AND APPEARANCE	No odor
	Grey color
DENSITY	7.2
FLAMMABILITY	If the flakes are crushed or milled to a powder this powder or its dust may ignite in presence of flame or spark
AUTO-FLAMMABILITY	Wet material release hydrogen gas, which may auto-ignite
BOILING POINT	2 097 °C

Features of electrolytic manganese metal :

Mn	99.7% min
	0.05% max
C	0.04% max
P	0.005% max
SE SI FE	0.205% max

Size:

• In flakes
  

We offer silicon metal of high homogeneity in chemistry & grain structure. Silicon metal available in powdery form, we offer silicon metal in different grades like coarse, fine & high quality.  Silicon metal is low iron content & sizing of 0, 2-0, 8 mm also makes it extensively used as an alloying element in aluminum.

Properties of silicon metal:

Grade	Si (%Min)	Fe / Al/ Ca	Size
553	98.5	0.5/ 0.5/ 0.3	10-100 mm
441	99.0	0.4/ 0.4/ 0.1	10-100 mm
Powder	99.0	0.4/ 0.4/ 0.1	-325 Mesh or finer

With the help of our well equipped manufacturing unit, we are offering a wide range of ferro silicon calcium. Ferro silicon calcium is used in different industries and are offered at competitive prices.

Composition of ferro silicon calcium :

• CA : 30% Min to 90% Min

Specification :

• Size: 0.2 mm

Ferro silicon offered by us is a alloy of iron & silicon having between 15 & 90% silicon. Ferro silicon also contains high proportion of iron silicides and features melting point of about 1200 °C to 1250 °C with a boiling point of 2355 °C. Ferro nickel deoxidizing properties also prevents loss of carbon from the molten steels.

We provide ferro silicon with following specifications:

Si 65% min, Si 70% min, Si 73% min, and Si 75% min, Al 2% max, 1.5% max and low Al , Sizes and packing as required.

Uses: Used in steel making & foundries in production of:

• Carbon steel
  
• Stainless steel
  
• Other ferrous alloys
  

Apart from this, it is also used for manufacturing:

• Corrosion-resistant & high-temperature resistant ferrous silicon alloys
  
• Silicon steel for electro-motors & transformer cores
  

Ferro silicon magnesium offered by us produces high quality nodulising agents. These ferro silicon magnesium find wide application in production of SG Iron & specialty grey iron castings for the automobile industry. The use of ferro silicon magnesium also provide number of distinct advantages in nodularisation of ductile iron.

These include:

• Higher quality castings through maximum nucleation
  
• Improved graphic nodularity
  
• Fewer as-cast carbides in thin section castings for improved machine-ability
  
• Reduced heat treatment costs
  
• Precise control of rare earth levels with single alloy addition
  
• Higher levels of ferrite & lower hardness for given composition and section sizes
  
• Greater tolerance to slightly higher level of pearlite promoting residual elements
  

Composition:

Si	44-47%
Mg	5-5.5%
Fe	45%max
Ce	1-1.5%
Ca	1% max
Al	1%max
Size	5-30mm (90% min)

Ferro Molybdenum offered by us is a potent hardening agent and is a constituent of many heat treatable alloy steels. Ferro molybdenum helps in improving corrosion resistance of stainless steel. In iron, ferro molybdenum is effective in strengthening & hardening, which causes austenite to transform into fine pearlite/ bainite.

Chemistry	Mo	60% min.
	C 0.10% max.
	P 0.05% max.
	S 0.15% max.
	Si 1.00% max.
	Cu 1.00% max.
Size	2" x 1/2"	1/4" x 8M
	3/4" x 1/4"	8M x Down
	1/4 x Down	20M x Down
Bulk Density	320 lb./cu. ft
Apparent Density	9.0 gm/cubic centimeter
Approximate Melting Range	3452 °F Liquidus	3272 °F Solidus

We offer clients low carbon ferro chrome, which features corrosion & oxidation resistance properties. Low carbon ferro chrome is also a mild hardening agent & helps in improving wear resistance of a metal.

Approximate Melting Range	Grade
.01% C	3074 °F Liquidus	3020 °F Solidus
.05% C	3308 °F Liquidus	2966 °F Solidus
.10% C	2920 °F Liquidus	2450 °F Solidus

Specifications:

CR	60% MIN
C	0.25% MAX
SI	1.50% MAX
P	0.04% MAX
	0.03% MAX
SIZE	10-50MM 90% MIN

We offer high quality ferro niobium to our clients. Ferro niobium are offered in steel drums and big bags and as per the client's specifications.

Features of ferro niobium :

• Increase in high temperature & corrosion resistance and oxidation resistance
  
• Improve creep resistance
  
• Reduce erosion at high temperatures
  

Applications :

• For turbine blade applications in jet engines
  
• Used as an additive for steel-making, foundry and alloying agent for electric welding rod
  

We offer magnesium ingot. It is used in aluminum-magnesium alloys production for providing high strength with good ductility. Further, manganesium ingot also features excellent corrosion resistance and weld-ability.

Features of mangnesium ingot :

• High strength
  
• Good ductility
  
• Excellent corrosion resistance
  
• Weld-ability
  

Application:

• Beverage cans
  
• Structural components of automobiles and machinery
  

Packing:

• Water proof wrapped & strapped to magnesium pallet
  
• Customized packaging as per customer’s requirement
  

We offer ferro nickel, which are available in different compositions and size from 3 to 50 mm. These ferro nickel are offered at market leading prices.

Constituents :

• Ni 33.156%Fe-balance
• Co 0.745%
• Cr 0.031%
• P 0.029%
• C0.015%
• S0.015%
• S 0.029%
• Si 0.321%
• Cu 0.055%
• Packing: In big bags

Our range of moly oxide  (roasted molybdenum concentrates) are used as a corrosion inhibitor ans as a source of molybdenum compound. These moly oxides are supplied in big bags and other elements are added upon the request of the clients.

Composition of moly oxide:

Mo 52%, 55%, 57%

Applications of moly oxide:

• In ceramic glazes
  
• Enamels & pigments
  
• As a catalyst
  
• In agriculture