Cable Trays

We are a trusted name in producing Perforated Cable Trays, which are extensively used in for installation of cables, for smaller & controlled cables. For its production, we are using raw material such as HR sheets, SS aluminum. We are providing complete customization sizes and other measurements. Further, it has the following features such as:

• Finish: Painted, Powder Coated, Galvanized
• Width: 15mm to 1000mm
• Thickness: std 14swg to 16swg

Our company is a recognized producer of Ladder Cable Trays which are used for installation of cables, for heavy & power cables. We welcome suggestions on the raw material to be used and also regarding other physical features. Some standard features are:

• Raw material used: HR sheets, SS aluminum
• Finish: Painted, Powder Coated, Galvanized
• Width:150mm-----1000mm
• Thickness: std 14swg---16swg

We offer a wide range of cable trays, including perforated and ladder type of cable trays in various width ranging from 50 mm to 1250 mm and height ranging from 15 mm to 50 mm. The height for perforated type is available upto 150 mm. Cable Tray and allied accessories are made out using various material having thickness from 1.6 mm to 6 mm. We use mild steel, stainless steel, aluminium, etc., for manufacturing our range. Our range of cable trays is manufactured in compliance to various international standards and specifications viz. NEC/NEMA. The standard finishes for mild steel trays are:

• Hot dip galvanized
• Powder coated
• Polyurethane coated
• Epoxy coated
• Self colour (black)
• Painted

Design of Cable Trays

• Cable trays design is based on limitation of deflection of cable trays L/360. It is ordinarily recommended that spacing of structures be limited to 1500 mm to provide a techno-economic design.
• The width of the cable trays are determined by the diameter of cables, that are run over the trays i.e. the clearance between heavy duty cables is equal to the diameter of cables, or cable cluster that pass over the tray. Cables used for lighting, instrumentation and other similar loads are usually bundled in a cluster, duly clamped and are run along one side of the tray.
• Height of the flange of the cable trays are designed based on the load carried by the cable trays and also the availability of space wherein the able trays are to be fixed. The rungs of the ladder type cable trays are normally spaced between 250 mm/300 mm pitch.
• The channels of ladder type cable trays are sometimes placed facing outwards. This facility increases the effective width of cable trays and also the stringer of the ladder type trays are used for fixing the lighting/instrumentation cables.

Our Cable Raceways are extensively used for installation of cables and underfloor networking cables. For its production, we are using premium quality raw material such as HR sheets and SS aluminum. It has the following physical aspects:

• Finish: Painted, Powder Coated, Galvanized
• Width: 50mm to 500mm
• Thickness: Standard 14swg to 16swg

We are engaged in manufacturing of cable ladders that include elongate spine members that can be bended into different configurations and spaced apart hangers that are attached to the elongated spine members. These cable ladders have the following salient features:

• 45 deg & 90 Deg. Horizontal Inward / Outward Bends
• 45 Deg & 90 Deg Vertical Inward / Outward Risers
• Tees
• Concentric & Eccentric LHS/RHS, Reducers / Expanders From 100 mm unto 900 mm Widths
• Crosses Pultruded
• FRP Coupler Plates With SS 304 Or SS 316 Hardware
• Horizontal & Vertical Moulded FRP Hinges For Flexible Angle Bends Covers
• Clamps For Fixing Of Cable Trays Onto Supports
• FRP Supports For Cable Trays

We also offre our client the Bolted Rung Type Ladder Tray which is been made to hold the electrical cables or the air conditioning ducts in any industry or the hotels. These trays are been made with high quality mild steel and can be dismanteled or assembled as per the requirement of the client. We can manufacture these trays as per the client's specification and design requirement.

We are a prominent name in manufacturing Floor Trunking, which are used for installation of cables and underfloor networking cables. Raw materials such as HR sheets and SS aluminum are used for the floor trunking keeping in mind the requirements of the clients. Further, it has the following features:

• Finish: painted, powder coated, galvanized
• Width: 50mm to 500mm
• Thickness: std 14swg to 16swg

Our concern is well known in the market for its gratings, which are extremely demanded across various process industries. They are basically used as platform or walkways. These gratings are made of MS flat. We are providing its dimensions on the basis of client’s requirements.