We supply M-Lock, M-Stage, All-Round, Kwikstage/Wedgelock, Ring Lock, U Lock, Cuplock Scaffolding Systems and accessories as per International Standards and customized to requirements of the customers.

• Steel Battens : Steel Batten in the sizes 1.3/1.8/2.5 mtr.
• Props : Adjustable Telescopic Props in the following sizes

Closing Ht. (Mtr.)	Opening Ht. (Mtr.)
1.07	1.82
1.75	3.12
1.98	3.35
2.59	3.95
3.2	4.87

• Outer :
• Inner : 48.3mm OD, 3.8mm wall thickness
• Accessories : Prop Nut with Handle or without Handle Sizes 69 & 76mm. Thread : ACME.
• Prop Sleeve : Available in Cut thread & Roll Thread. Size 60.3mm OD. Length 200-300 mm. Thickness 3/3.5/4mm Locking Pins.
• Finish : Hot Dip Galvanized, Painted, Powder Coated & Electroplated. Adjustable Base Jacks (Screw Jack), U-Head Jacks (Stirrup Head) & Universal Jacks (Solid & Hollow)
• Length : 450/550/650/750/850/1000 mm
• Rod Diameter : 34/38 mm
• Tube Diameter : 34/38/48 mm
• Thickness : 4/5mm
• Base Plate : 150x150x5/6/8 mm
• Accessories : Jack Nut : Malleable Cast Iron/Drop Forged in Sizes 32,34,34(1.1/2” & 2” pipe),36,36(1.1/2” & 2” pipe), 38,40 & 48mm.
• Thread : ACME.
• Finish : Electroplated (White & Golden).60.3mm OD, 3.8mm wall thickness.

We offer a wide range of scaffolding fittings & form work accessories that exhibit superior quality standards.
Scaffolding Fittings

• Right Angle Coupler :Forged in sizes 42 & 48mm. Min slip load:15KN. Min distortion load : 30 KN.Pressed in size 48mm. Min slip load : 10 KN.Min distortion load : 17 KN.
• Swivel Coupler:Forged in size 42 & 48mm. Min slip load : 8.5 KN.Min distortion load : 20 KN.76 & 90mm sizes also available. Pressed in size 48mm. Min slip load : 8.5 KN. Min distortion load : 17 KN.
• Girder Coupler: Size 48mm. Min slip load : x axis-10KN per pair. Y axis – 30KN per pair. Z axis : 6.5 KN per pair.
• Put log Coupler: With forged/pressed clip in size 48mm. Min slip load: 1.25KN. Min Distortion Load : 2.30 KN.
• Sleeve Coupler :

Size : 48mm.
Min slip load : 6 KN. Min
Bending load: 19 KN. Finish : Self colour, Electroplated (Blue/Golden Passivisation), Powder Coated, Hot Dip Galvanized
Standards : EN-74/BS-1139/BS 5973/AS:1576.2/JIS:G3444/SS:311.

• Form work Accessories :

Waller Plate with Swivel Nut(Cast & Forged) : Thread Size 15mm Dywidag Thread.
Proof Load : 180 KN
Waller Plate : Sizes 120mmx 120mmx 10mm/ 8mm/ 6mm Water Barrier with Flange : Malleable Cast Iron in thread size 15 & 20mm Dywidag thread.
Proof Load : 180 KN
Water Barrier with Grooves : Malleable Cast Iron in thread size 15mm Dywidag thread.
Proof Load : 180 KN.
Wedge Clamp/Rapid Clamp : Sizes 118x51mm & 105x44mm.
Min slip load : 3.5 Kg. Hex Nuts (From Hex Bar) : Sizes SW30x30mm to SW30x105mm.
Thread: 15mm DW.
Proof Load : 180 KN.
Sizes : SW36x130mm.
Thread : 20mm DW
Tie Rod : Mild Steel/En-8 in sizes 15mm & 20mm. Length up to 6 mtr. Cold Rolled, Weldable.
Proof Load : 130 KN. Standards : DIN 18216, DIN-EN1561, DIN-EN1562, DIN-EN1563, DIN 7526F.

We offer the widest range of stainless steel fasteners that are developed from best quality steel.

• Range of products: Socket Cap Screws, CSK Cap Screws, Self Drilling Screws, Wood Screws, Carriage Bolts, Bolts (Hex/Square/Tee), Nuts(Hex/Square/Nylock), Machine Screws (CSK/Pan/Cheese), Self Tapping Screws, Coach Screws.
• Size: From M1.6 to M16 (Cold Forged) From M18 to M36 (Hot Forged).
• Other Products: Flange Bolts, Pozi Phillip Screws, Security Nuts/Screw, Taptite Screws, Torx Screws, Trilobular Screws, Button Socket Screws, Anchor Fasteners, Press Products, Phillips/Slot head Screws, Rivets (Semi-Tubular, Solid, Step, Hammer Drive), Spring/Nuts, Casting Products, Fixing Systems.
• Grade: A2, A4, B6X, B8, B8M, 8.8, 10.9 & 12.9.
• Class: 50, 70 & 80.
• Standards: DIN/JIS/ISO/ASTM/IS/BS/ANSI

We offer specialized seamless tubes of very high dimensional accuracy & excellent concentration. Our tubes are ideal for applications such as the manufacture of bearings, automobile parts, drill rods, hydraulic cylinders, gas cylinders, boilers, heat exchangers, OCTG (Oil Country Tubular Goods), etc.

• Size Range: 6mm to 273mm outside diameter : 0.5mm to 7.5mm wall thickness.
• Length: Tubes are generally supplied in random lengths between 3 to 7 meters as per specifications. Tubes in exact length, multiples of desired unit length or long lengths are also offered.
• Straightness: Straightness is guaranteed to be better than or equal to 1mm per 1000mm for hot finished tubes and 1mm per 600mm for Cold finishes tubes.
• Ovality: Ovality is guaranteed to be contained within the overall tolerances on the diameter.

Fasteners have multi usage, such as to close a container, or joining the opening of flexible material, attaching a lid to a container etc. Being devised by leading industrial players and being branded, these are impeccable and are in compliance with the set international standards such as DIN, ASTM, BS, ANSI, JIS, IS, ISO, BIS.

Hex Screws/Bolts available in Diameter M3-M42 and Length 4 to 350mm in steel grade 8.8/9.8/10.9/12.9/13.9 and Nuts available in Diameter M6-M33 in Steel grade 5.0/8.0/10.
We offer following types of Fasteners as listed below:

• Bolts & Nuts: Hex Head Bolts & Nuts, Cup Square Bolt & Nut, Eye Bolts, Plow Bolts (Square Neck), Eye Nuts, Slotted Nuts, Weld Nuts, Prevailing Torque Nuts- Nylon Inserted and All Metallic, Hex Lock Nuts.
• Screws: Cross Recessed and Self Tapping Screws, Hexagon Socket Head Cap Screws, Hexagon Socket Set Screws, Hexagon Socket Low Head Cap Screws, Hexagon Socket Counter Sunk Head Cap Screws, Hexagon Coach Screws, Hexagon Socket Shoulder Screws, Hexagon Socket Button Head Screws etc.
• Washers: Punched Washers, Machined Washers, Spring Washers, Disc Spring Washers, Star Lock Washers, Serrated Washers, Circlips /Eclips etc.
• Keys: Hexagonal Socket Keys, T Handle Keys.
• Pins: Split Cotter Pins, Dowel Pins, Taper Pins, Parallel Pins, Clevis Pins.
• Fully Threaded Rods & StudsExpansion/Anchors
• Engine Fasteners: Connecting Rod Bolts/Nuts, Main Bearing Cap Bolts, Cylinder Head Screws/Bolts/Studs, Flywheel Bolts, Rocker Lever Adjusting Screws, Banjo Bolts, Double End Studs etc.
• Wheel and Under- Carriage Fasteners: Wheel Bolts/Studs, Wheel Nuts, Two-Piece Wheel Nuts, Suspension Bolts, Track Shoe Bolts/Nuts, Propeller Shaft Bolts/Nuts.
• Chassis Fasteners:Rivets, Centre Bolts, Spare Wheel Carrier, Mounting Bolts/Nuts.

We offer trusted quality and branded bicycle, parts and accessories, that are developed from best quality steel. Bikes with Coaster Hub Brake Sets and Exerciser also available. All bicycles available in CKD or SKD packing. Color and accessories to order. Other models as per buyer’s specifications also available. We offer following types of bicycle, parts and accessories as listed below:
Complete bicycles:

• Standard Roadsters: Phillips Type 22”/24” Gents Single/Double bar/Ladies Curved Bar etc.
• City Bikes: Demi Balloon/French type 22”, SLR 21” Gents/Lady etc.
•  Kids Bikes: Hi-Riser 15”, BMX 14”/12”/10” etc.
•  MTB Bikes: Single Speed 26”/24”/20” with over sized tubing''s, MTB 26” 21 speed/18 speed. Aluminum Alloy Bikes with Shimano Components.

Spare parts:

• Hubs: Phillips Type/Parallax Type/Raleigh Type etc.
• Chain Wheel & Crank Set: Single Speed Cottered (For 1/2”x1/8” chain) in different teeth & crank sizes etc. Multi speed index cotter less ( for1/2” x 3/32”) in 28/38/48T or 24/34/42T x 170 mm Crank.
• Freewheel: Single Speed (For ½” x 1/8” chain) /multi speed index (for 1/2” x 3/32”) Bk./ZP/Golden etc.
• Pedals: Fine Diamond 4” with reflector, Full Rubber Block 4”, Bow Type with reflector, Polano Type etc.
• Saddle: MTB Double action plastic base with vinyl top, Scooter Type, Will Top, Release Type, Racing, 90/3 PVC Top & Leather top etc.
• Brake set: Calliper Brake set BMX/SLR/French, Cantilever Brake set MTB, Rim Brake Raleigh/Balloon/Phillips/Brazilian etc. All brake sets in BCP or powder coated etc.
• Rims: Hooked bead type, Endric type, West wood type, Westric Type in BCP & Plastic Rim etc.
• Handles: Raleigh type, Phillips type, North raised Philips type, Zaire type, Mexican type etc.

We offer a large assortment of industrial quality Hand Tools, manufactured by eminent players in the industry. Being branded, perfection and industrial standard configuration is duly ensured in our Hand Tools, with minimal fallacies. These are developed from best quality steel, drop forged-carbon steel or tested chrome vanadium. These are available in mat, head polished and satin finished. We offer following types of Hand Tools as listed below:

• Spanners: Double Ended Open Jaw Spanners Long pattern & Short pattern, Combination Open & Ring End Spanners Long pattern & raised panel, Single Ended Open Jaw Slugging Spanners, Bi-Hexagon Ring Spanners, Deep Offset Gas Spanners English type & Italian type, Box Spanner, Spark Plug Spanner, L-Shape Spanner etc.
• Pliers- Combination Plier, Combination Plier Heavy Duty, Shearing Plier, Long/Bend/Flat/Round Nose Plier, Miniature Pliers, Wire Strip Plier, Slip Joint Plier, Fencing Plier, Locking Plier, Water Pump Plier, Tin cutter Plier etc.
• Hammers- Ball Pein Hammers, Cross Pein Hammers, Claw Hammers, Pin Hammers, Machinist Hammers, Sledge Hammers, Chipping Hammer with wooden Handle/Springs, Stoning Hammers, Club Hammers etc.
• Wrenches/Plumbing Tools- Pipe Wrench Swedish/Spanish Type, Adjustable Pipe Wrench, Drainer Wrench, Master Wrench, Basin Wrench, Chain Pipe Vice, Chain Pipe Wrench, Pipe vice self locking with stand, Hand Vice, Pipe Cutter, Tube Cutter, Pipe Die Set, Ratchet Pipe Die Set etc.
• Other Tools- All types Hack Saws, Pincers, Striking tools, Wood Working Tools, Vices, Bevel Square, Centre Punches, Letter Punches, Figure Punch, Leather Punch, Anvil, Earth Clamp, Cobbler Anvil, Tap Wrench, Round tap Wrench, Spirit Level, Oil Can Wesco Type/Perfetto Type/Pistol Type, Grease Gun lever type, Grease Gun lever type with Hydraulic Coupler, Flexible Hose for Grease Gun, Suction Gun, Transfer Pump/Lever barrel Pump, Screw Drivers, Automobile Tools, Garden Tools etc.

We offer a large gamut of Tyres and Tubes, manufactured by eminent industrial players, for bicycles. These are available in distinct sizes, load ability, rim types, treads and construction options like cotton and nylon to suffice to different requirements. Tyres available in full colors (Cyan blue, Green, White, Red, Royal blue, Yellow, Violet, Pink), Gum Wall, White Wall. Tyres can also be manufactured/supplied to customer design/specification. Our Tubes are available in Natural & Butyl Rubber compound with American / French / Dunlop / Italian valves in all Tyre sizes. These are devised by ETRTO (European Tyre & Rim Technical Organization).

MOUNTAIN TERRAIN BIKE (MTB) TYRES

SIZE (INCHES)	ETRTO (MM)
26x1.75	47-559
26x1.90	50-559
26x1.95	52-559
26x2.0	54-559

ALL TERRAIN BIKE (ATB) TYRES

SIZE (INCHES)	ETRTO (MM)
24x1.5	40-534
24x1.3/8	37-540
24x1.75	47-507
24x1.95	52-507
26x1.5	40-584

BRITISH MOTOR CROSS (BMX) TYRES

SIZE (INCHES)	ETRTO (MM)
12.1/2x2.1/4	62-203
14x1.75	47-254
14x1.95	52-254
16x1.75	47-305
16x1.95	52-305

CITY BIKE AND SPORTS TYRES

SIZE (INCHES)	ETRTO (MM)
28x1.1/2	40-635
26x1.1/2	40-584
26x1.3/8	37-590
26x2x1.3/4	57-571

We offer the widest range of Steel Radial & Bias tyres to all user segments. Our Tyres, Tubes, Flaps & Re-Treading products are renowned for their superior quality and durability with a strong presence in International markets. Our range covers the following categories:

• Floatation Implement & Trailer Tyres
• Multi Purpose Truck Tyres
• Truck Tyres
• Light Commercial Vehicle Tyres
• Industrial & OTR Tyres
• Farm Tyres
• Car & Jeep Tyres
• 2 & 3 Wheeler Tyres
• Butyl Tubes
• Tyre Re-Treading Materials

We offer MS ERW Black & Galvanized pipes to cater a variety of requirements of Agriculture, Industrial Usage, Oil, Gas, Sanitary, Water, Power, Electrification, Tabular Poles, Structural, etc. in Light, Medium & Heavy series. All tubes exported are subjected to extensive tests including hydraulic tests which ensures that there are no leakages. Before leaving, pipes passes through prescribed quality control process to ensure the best quality.

• Mild Steel ERW Black Steel Pipes from 15mm NB to 150mm NB as per BS:1387
• ERW Hot Dip Galvanized Steel Pipes from 15mm NB to 150mm NB as per BS:1387
• Scaffolding & Structural Purpose Pipes from 15mm NB to 150mm NB as per BS:1139
• Casing Pipes from 100mm NB to 150mm NB as per BS:879
• Conduit Pipes from 20mm NB to 50mm NB as per IS:9537
• General Engineering Purpose Pipes from 15mm NB to 150mm NB as per IS:3601

We are committed to provide world class bearing solutions to global markets. We offer a wide range of Ball, Needle, Cylindrical, Spherical and Taper Roller bearings for the use in Automotive, Textile & General industries. We are also in a position to supply bearings as per customer’s design specifications. Our bearings conform to International Standards (ISO) for boundary dimensions, tolerances and internal clearances. They also comply with the associated DIN, AFBMA and British Standards.

Ball Bearings

• Radial ball bearings


• Angular Contact ball bearings


• Four-point ball bearings 


• Wide inner ring ball bearings 

Roller Bearings

• Spherical roller bearings


• Barrel roller bearings : Angular contact type


• Tapered roller bearings


• Cylindrical roller bearings

Needle Roller Bearings

• Needle rollers


• Needle bushes/drawn cup bearings: with full complement needle rollers. Also with cage-guided needle rollers


• Needle cages/needle rollers & cage assemblies


• Roller cages non-ferrous


• Needle roller bearings: cage guided needles


• Needle roller bearings: with full complement needle rollers


• Bottom roller bearings


• Cam Followers


• Needle thrust bearings


• Combined needle radial thrust bearings

Housed Units

• Ball bearing Pillow Block unit


• Ball bearing flanged units


• Ball bearing cartridge units

Materials: Standard bearings are made using high quality carbon-chrome through hardening steel of similar composition of the following specifications SAE 52100 (or) 100 Cr6

Safety Recommendations: Bearings should be stored in a dry and clean area. Packing should not be opened until ready to use.

We are trusted name in offering a wide range of Galvanized wires, annealed wires, wires rods, wire mesh, etc. These are widely used in various fastener industries, welding electrodes, meshes, nets, screens, conveyor belts, kitchen appliances, wire cloths, etc. Following are the sizes available:

• Wire Rods – 5.5 to 34mm
• Wire : 0.07 to 16mm