|
View all our products / services as a slide show.  |
Supported by our experienced team of personnel, we offer a qualitative range of Bulk Carriers that are fabricated using graded material. Engineered with precision, these carriers are widely demanded in various industries owing to their high load bearing capacity, sturdy built and long functional life. Provide easy loading and unloading, our range of carriers are also available with various additional accessories.
|
Our clients can avail from us a wide range of Cement and Bulk Carrier that is available with a capacity of 84 tones static load and 24 tones lift load. Our range provides a tipping angle of 45 degrees. In addition, the hydraulic has a single multi stage cylinder with complete wet line kit that is sourced from Holland. Following are the features of our range of Cement and Bulk Carrier: - High load bearing capacity
- Precision engineered
- Sturdy construction
For more details refer to the attached pdf file | 
|
| We offer a wide range of Car Carriers that are fabricated with well integrated rectangular cross tubings. The upper deck platform has 3 platform constructions for flexibility at the time of multiple car loading. Loading and unloading is operated using twin hydraulic cylinders. In addition, there are various other accessories available such as SUPD, RUPD, tool box and stepney bracket. Following are the features of our range of Car Carriers: - High load bearing capacity
- Easy loading and unloading
- Available with various accessories
Technical specifications: | Model | 10 TR low bed two axle car carrier | | Overall length of trailer | 22400 mm | | Overall width of trailer | 2600 mm | | Un laden height of trailer | 4750 ± 50 mm | | Inner clear passage width (mudguard) | 1975 mm | | Inner clear width (elsewhere) | 2100 mm | In addition, our range of Car Carriers is also available in following specifications: | Steel Body | Body structure fabricated with well integrated rectangular cross tubings for excellent torsional strength and high strength. High strength to weight ratio and maximized load bearing. Side and roof panels are corrugated with CR sheets for high rigidity with lesser weight. 3 inspection doors (600x1000mm) on left side. | | Main Chassis | MIG welded construction comprising 02 No. longitudinal-beams of ISMB 300/ ISMB 250 suitable flitched. Cross Bearers are ISMC 125x65/100x50 & 75x40 closely pitched and reinforced with longitudinal angles ISA 40x40x5 & ISA50x50x5 for higher cubic volume. | | Axles | 10 T capacity tandem solid axles (diameter 118 mm) with highly precision engineered spindle ends to receive taper roller bearings, hub (made of S.G iron) and brake drum. Hubs have 10 bolts at PCD 335 mm for drum/ rim fixation. | | Upper deck Platform | 3 Platform constructions, manual, hydraulic cylinder operated for flexibility in multiple car loading. Platform made from tubular rectangular pipes reinforced with cross members of ISMC 75x40. In addition, our range also has box and anti-skid perforated sheet. | | Lower Platform | Made with perforated sheet of with chequered sheet 3.2 mm in the middle and side of the track. | | Hoisting System | Conventional hydraulic kit powered kit powered with HYVA battery. Well-designed hydraulic circuit with high quality equipment and accessories. | | Rear door cum loading ramp | Loading / unloading operated with twin hydraulic cylinders. Tubular construction with 1.6 mm thick M.S. plain sheet (outer side) adn 2.5 mm M.S. sheet (inner side wheel track). Antiskid rod to avoid slipping of tyres. | In addition, our range of Car Carriers is also available in following specifications: |
We offer a wide range of Car Carriers that is fabricated with well integrated rectangular cross tubings. The upper deck platform has 3 platform constructions for flexibility at the time of multiple car loading. Loading and unloading is operated using twin hydraulic cylinders. In addition, there are various other accessories available such as SUPD, RUPD, toolbox and stepney bracket. Following are the features of our range of Car Carriers: - High load bearing capacity
- Easy loading and unloading
- Available with various accessories
For more details refer to the attached pdf file |
|
| Our clients can avail from us a wide range of Cement and Bulk Carrier that is available with a capacity of 84 tones static load and 24 tones lift load. Our range provides a tipping angle of 45 degrees. In addition, the hydraulic has a single multi stage cylinder with complete wet line kit that is sourced from Holland. Following are the features of our range of Cement and Bulk Carrier: - High load bearing capacity
- Precision engineered
- Sturdy construction
| Model | SVK-BT | | Trailer Type | Bulker Trailer | | Tare Weight (kg) | 9000 T, 10000T, 10500 T, 11000 T, 11500 T | | Axles | 2 X 12 T, 3 X 15T | | TYRE Size | 11.00-20 | | Quantity of TYRE | 12 | | Spare Wheel | 1, 2 | | Tipping Angle | 45 Degrees | | Landing legs | York with 84 tones static load and 24 Tons lift load | | Bucket | Side wall front wall and rear tail door of 6mm steel plates, floor of 8mm steel plates | | Suspension | YORK Tandem, York tandem /bogie, York tri | | Brakes | 2 Line Pneumatic System | | Hydraulics | Single multi stage cylinder with complete wet line kit from HYVA of Holland | | Mud Guards | Steel mudguards with rubber mud flaps | | Electrical system | 24 electrical system with 7 -pin connector | | Finish | Entire chassis is sand blasted after welding to commercial grade and painted with high build primer and two coats of high build automotive final paint | |
Our clients can avail from us a wide range of Tipper Lorry that is available with a payload capacity of 14500 Kg. Our Tipper Trailer is manufactured using latest machinery that ensures the quality at par with international standards. The entire chassis is sand blasted after welding to commercial grade then it is painted with high build primer and two coats of high build automotive final paint. Our range is in great demand because of following features: - Fine finish
- High payload capacity
Technical specifications: | Model | SVK-T | | Payload | 14500 Kg | | Capacity | 28 CBM | | Length | 12666 mm | | Tare weight | 9000 T | | Axles | 2 x 12 T | | Wheels | 12 no 10.00 x 20 | | Landing legs | SVK with 80 tones static load | | Spare wheel | 1 | | Tipping angle | 45 degrees | | Bucket | Side wall front wall and rear tail door of 5 mm steel plates, floor of 8 mm steel plates | | Suspension | SVK tri-axle | | Brakes | 2 line pneumatic system | | Electrical system | 24 electrical system with 7-pin connector | | Finish | Entire chassis is sand blasted after welding to commercial grade and painted with high build primer and 2 coats of high build automotive final paint. | | Hydraulics | Single multi stage cylinder with complete wet line kit from HYVA | | Mud guards | Steel mudguards with rubber mud flaps | |
|
| We offer a wide range of Side Board Trailer that has a static capacity of 80 tones and lifting capacity of 28 tones. In addition, these are provided with swivel large pads for stable support. The surface finishing of our range is done using shot blasting method. In addition, to give a fine finish our range has one coat of red oxide primer and two coats of enamel paint sin golden shade. Following are the features of our range of Side Board Trailer: - High load bearing capacity
- Corrosion resistant finish
- Optimum suspension
For more details refer to the attached pdf file |
 | Collapsible Side Panel Trailer |  | Optimizing the cutting edge technology, we are offering a range of collapsible side panel trailers that are manufactured in compliance with the set industrial standards. Our range of trailers have the load bearing capacity of 24200 kg and are provided with 3 axles. Further, our range is known for its sturdy construction, high performance and excellent load capacity. | Model | SVK-SP | | Trailer Type | 40 ft Collapsible | | Dimension(L×W×H)(mm) | 12200x2590x1525 | | Axles number | 3 | | Wheelbase | 4450 | | Spring Leaf(Front/Rear) | 07/07/09 | | Quantity of TYRE | 12 | | TYRE Size | 10.00-20 | | MAX Total Mass(kg) | 35200 | | Capacity Load(kg) | 24200 | | Tare Weight(kg) | 8450 | | The MAX weight acting at the King pin(kg) | 10700 | | Kingpin Setting/Rear Setting(mm) | 650 | | Material of Beam(fabricated) | ST52 | |
|
|
|
