Siechem 125 & Siechem 155 Electron beam cross linked cables for various applications listed below:
 
Siechem 125, flexible single core cable from 0.25 sq. mm to 630.mm² as per IEC 60228 Class 5, 600/1100 Voltage rated, conductor as per IEC 60228 Class 5, temperature range -40 to +125 C, Short Circuit overload up to + 280^o C (IEC 60092), Very high resistance to heat, oil, pressure, hydrolysis and weathering, flame retardant, electron beam cross linked, soldering iron resistant, easy to strip, flexible as per relevant VDE / IEC / BS Standards. RoHS compliant as per Euro Norms.
Application: Public buildings, shopping malls, powerstations, shipbuilding, power stations, sensor leads, solenoid valves, control panels, signal systems, hospitals etc
 
Siechem 125 Multi Core Cables
Similar to Siechem 125 flexible single core electron beamed cable. Cross section from 0.5 to 6 mm² Voltage range: 600/1100. (0.5 – 1 mm²: 450/750V). No. of Cores: 61 Cores. Intermediate layer is with woven glass tape. Meets IEC 60332-3-24 Cat. C and IEC 60332-1.
 
Siechem 125 Multi Core, Cable Screened cables
Similar to Siechem 125 Multi core electron beamed cables, but with intermediate layer as EMC screening. Cross section range from 0.5 to 6 mm². 600/1100 V rated. (0.5 to 1 mm² : 450/750 V rated)
 
Siechem 125 RW, reduced wall thickness cable, similar to electron beam cross linked Siechem 125 but also with halogen free, low smoke, low toxic, high current carrying capacity cables. Voltage range: 300/600 V. 0.25 to 300 mm² as per IEC 60228 Class 5.
 
Siechem 125 Marine cables, similar to the above type of cables and designed according to IEC 60092-353. This marine cable meets IEC 60332-3-22 Cat. A and IEC 60332-1. Conductor cross section from 0.75 to 300 mm². 
Application: Shipbuilding, electric systems, signal, control panels, sensor leads, solenoid values, electromagnets etc.
 
Siechem 155  Eco-F, (Eco Friendly) Single Core Cable
Similar to Siechem 125 RW, but with Eco friendly special properties. Cross section range from 0.25 to 16 mm² as per IEC 60228 Class 5, Tin plated copper. Voltage: 400/750 rating. Short circuit rating + 250 ^o C.
Application:  Where operating temperature requirement requires -40 to + 155°C. Tested for 2500 Hours at 155 ^oC for very high electrical & mechanical integrity.
 
Siechem 155 Single Core (Class F) cables
Similar to 155 Eco-F cables, but for -55 to +155°C operating temperature, electron beam cross linked. Voltage rating 600/1100V with short circuit overload to +280 ^oC.
Compatible to insulating varnishes & impregnation resins. Range 0.25 to 300 mm² as per IEC 60228 Class 5. Very high resistance to heat, pressure, oils, chemicals, hydrolysis and weathering, flame retardant, easy to strip, soldering iron resistant & flexible.
Application: Transformers, coil winding, motors, pumps, magnets, relays & electric systems etc.
 
 
Siechem 155 Multi Core cables.
Similar to Siechem 155 Single core cables, but with multi core,  0.25 to 2.5 mm² conductor as per IEC 60228 Class 5, 600/1000 V rated. (0.25 to 1 mm² : 450/750 V rated) No. of Cores: 2 to 6 or as per customer requirement.
 
Siechem 155 Multi Core Screened cables
Similar to Siechem 155 Multi core cables but with EMC screening as intermediate layer. Cross section range: 0.5 to 6 mm

Siechem Electron beam irradiation cross linked wire and cables are designed to work very high and low temperature as detailed below having high current carrying capacity, short circuit over load up to + 280° C. Compatible to standard varnish & resins, Halogen free, low smoke, low toxic, Fire retardant, Soldering iron resistant, easy to strip, flexible cables with resistance to heat, pressure, hydrolysis and weather. 
 
Siechem flexible single core cable as per UL 1385 / ETL / CSA  AWM  :  - 55 to +125 ^oC, 26-16 AWG, class – 5 conductor
 
Siechem flexible single core cable as per UL 3266 / ETL / CSA AWM :    - 40 to + 125, 26 – 14 AWG, class 5 conductor,
 
Siechem flexible single core cable as per UL 3271 / ETL / CSA  AWM  I A/B :  - 40 to + 125°C , 24 – 2/0 AWG, class 5 conductor, 600 V
 
Siechem flexible single core solid wire as per UL 3289 / ETL / CSA CL 1503 : - 55 to +150 ^oC, 24 – 2/0 AWG, class 5 conductor.
 
Siechem Multicore cable as per UL 4486 / ETL / CSA AWM I/II A/B: 20 – 10 AWG 300/ 600 V, 2-5 cores, class 5 conductor.
 
Siechem  Multicore cable as per UL 4486 / ETL / CSA AWM I/II A/B  : 20 – 10  AWG  300 V,  2-5 cores, class 5 conductor  but with EMC screened.
 
Siechem Multicore cable as per UL 4486 / ETL / CSA AWM I/II A/B : 20 – 10  AWG  2-5 cores, class 5 conductor with EMC screened but 600 V rated.
 
Application: Single Core – Motors, transformers, industrial electric and electronic wiring, public buildings, shopping malls etc. Multi core cables are for control, signal, sensor lead, solenoid valves, lifts, public building and industrial applications.
 
Please contact us for detailed data sheets

Range	Multi-core cables up to 400 mm2 & single core cables up to 1000 mm2
Conductor	Aluminum / Copper (Bare or Plated) solid / standard / Flexible
Insulation	XLPE / PVC / Elastomeric
Sheath	PVC / PE / Elastomeric with FR, FRLSH, ZHLS, LSF properties
Armour	Galvanised Steel / Aluminium – Round wire / Flat Strip
Jacket	PVC / PE / Elastomeric with FR, FRLSH, ZHLS, LSF properties
Standards	IS, BS, IEC, VDE or other National / International standards
Packing	In wooden/steel drums
RoHS	Complaint as per European norms
Certification	ISI marked

QAP, GTP & Leaflets available on request

For the first time in India, Electron beam irradiated XLPE cables with improved thermo, mechanical and electrical characteristics available.
 
Our Strength:  Quality, Delivery & Price.

Siechem brand is the most sought after cables and premium paid in India due its superior construction, quality and features.
 

Range	Single core Up to 150 mm2 and full range in multi core flexibles
Conductor	Bare / Tinned copper in stranded / Flexible or uni-lay construction
Insulation	PVC / PE / Polyolefine with FR, HR, FRLSH and LSF properties
Sheath	Elastomeric (for special application)
Operating Temperature	-55° C to + 70° C, 95° C, 105° C, 125° C and 155° C
Colours	Any standard colours
RoHS	Compliant as per European norms
Standards	IS, BS, IEC, VDE or other National / International standards
Certification	ISI marked

QAP, GTP & Leaflets available on request
 
For the first time in India, Electron beam irradiated Zero Halogen, Low Smoke, Soldering iron resistant  wire and cables with improved thermo, mechanical and electrical characteristics available.
 
Our Strength:  Quality, Delivery & Price. 
 
Application areas
 
Ships, High-rise buildings, offices, Air-crafts, Off-shore installation, Nuclear power plants, Rolling stock, Underground railways, Refineries, Air ports, Hotels, Cinema theatres, Shopping malls, Schools, Prisons, Hospitals etc.

Range	Up to 61 Cores and 6 mm2
Conductor	Bare / Tinned copper
Insulation	XLPE, PVC, PE & Elastomeric
Sheath	PVC / PE / Elastomeric with FR, FRLSH, ZHLS, LSF properties
Armour	Glavaised Steel Round Wire / Flat Strip
Jacket	PVC / PE / Elastomeric with FR, FRLSH, ZHLS, LSF properties
Standards	IS, BS, IEC, VDE or other National / International standards
Packing	In wooden / Steel drums
RoHS	Compliant as per European norms
Certification	ISI marked

QAP, GTP & Leaflets available on request
 
For the first time in India, Electron beam irradiated control cables are available with improved thermo, mechanical and electrical characteristics.
 
Our Strength:  Quality, Delivery & Price. 
 
Application areas: 
You name it; we have solution for any application - however complex it may be.

Shielded, Unshielded, Multi Pair, Multi Triad cables for process & instrumentation.
 

Range	Up to 80 pairs, 0.5, 0.75, 1.0 & 1.5 sq. mm
Conductor	Stranded, Solid, Plain or Tinned. Random or Uni-lay construction
Insulation	PVC, HR PVC, FR PVC, PE, Zero Halogen Low Smoke, LSF etc
Shielding	Foil / Braided, Individual / Overall
Sheath	PVC / PE / Elastomeric with FR, FRLSH, ZHLS, LSF properties
Armour	Armoured or un armoured, Round wire or flat strip
Jacket	PVC / PE / Elastomeric with FR, FRLSH, ZHLS, LSF properties
Specification	BS: 5308 (part I & II), DIN VDE 0815 & 816, IS 5608 & IEC 189 etc

 
QAP, GTP & Leaflets available on request
 
For the first time in India, Electron beam irradiated control cables are available with improved thermo, mechanical and electrical characteristics.
 
Our Strength:  Quality, Delivery & Price. 
 
Application areas: 
 
For Signal & Data Transmission used in control and instrumentation at Industrial plants, power stations, Refineries, Petrochemicals etc. Used for underground, outdoor as well as indoor applications.  Wherever, you need these cables for entirely different purpose, you name it; we have the solution  - however complex it may be.

Range	Multi-core cables with bare / Insulated messenger conductor
Conductor	Aluminum / AAA / Steel reinforced
Insulation	XLPE /  PVC / PE
Identification	Numbered / with ridges
Standards	IS, BS, IEC, VDE or other National / International standards
Packing	In wooden/steel drums
RoHS	Compliant as per European norms
Certification	ISI marked

QAP, GTP & Leaflets available on request
 
For the first time in India, Electron beam irradiated XLPE cables with improved thermo, mechanical and electrical characteristics available.

Our Strength:  Quality, Delivery & Price

Range	AEX / AEXF / AVX / AVSSX / AVXF / GXL/ TXL / SXL / FLR / TPU / REMS type of     cables
Conductor	Copper (Bare or tinned) standard / Flexible
Insulation	XLPO / PVC / Polyolefine / Elastomeric, Thin wall / Extra Thin wall
Standards	IS, BS, IEC, VDE, JASO – D 608-92, SAE- J 1127, SAE – J 1128 , DIN – 72551T.6, Thin wall  as per ISO 6722 or other National / International standards
Packing	In Coils / Reels / Timber Drums
RoHS	Compliant as per European norms
Certification	ISI marked

     
QAP, GTP & Leaflets available on request
 
For the first time in India, Electron beam irradiated Automotive and Battery cables with improved thermo, mechanical and electrical characteristics available.
 
Our Strength:  Quality, Delivery & Price.

CONFIGURATION :

For 10 prs, 20 prs, 50 prs, 100 prs, 200 prs 1200 prs, 1600 prs and up to 2400 prs

• BSNL Spec. No. GR /CUG-01/03, AUG. 2003 COMMON
• SOLID PIJF - Armoured Underground Cables
• SOLID PIJF - Unamoured Underground Cables 400 prs, 800 prs,
• CONSTRUCTION: Solid annealed copper 0.4, 0.5, 0.63 and 0.9 mm diameter
• INSULATION: Solid PE
• TWINNING: Two insulated conductors twisted into pairs
• STRANDING: 10 Pairs shall be stranded together to form a group or 2 x 10 pairs
• shall be made in group inner. Cables up to 100 pairs are formed by groups. For cable core is formed by units.
• FILLING: The water resistant Jelly-filling compound is applied to the air-space within the cable core
• WRAPPING: Suitable material tape is applied on the cable core.
• MOISTURE BARRIER: Poly Al tape of thickness ranging from 15 microns upwards. The metallic foil is applied   longitudinally or helically with an overlap.
• INNER SHEATH: Polyethylene, Black.
• ARMOURING: Galvanized steel tape over bedding of two closed helical lapings of water proof cotton (or) polythene tape. JACKETING / OUTERSHEATH Polythylene Black

Range	CAT 5 / CAT 5e & CAT 6 for LAN topologies of UTP/FTP types
Conductor	Bare solid copper
Insulation	PE
Sheath	PVC / PE with FR, FRLSH, ZHLS properties
Standards	IS, BS, IEC, VDE or other National / International standards
Packing	In wooden / carton boxes
RoHS	Compliant as per European norms

QAP, GTP & Leaflets available on request
 
Also Full range of PCM Cables
 
Our Strength:  Quality, Delivery & Price. 
 
Application : Voice, Data & Vedio.

• Cable Jointing & Termination kits up to 35kV Grade
• Anti tracking tubes
• Bus Bar insulating tubes
• Stress Control tubes
• Semi Conducting tubes
• Dual Wall tubes
• Heavy Wall Black Insulating tubes
• Medium wall Black Insulating tubes
• Thin Wall tubes
• Wrap Around telecom closure sleeves
• Moulded components like break outs, Rain Skirts & End caps