Digital Temperature Controllers, Digital Temperature Process Controller, Data Indicators, Data Loggers and Scanners, Digital Scanners, Digital Timers

Home

Profile

Products

Enquiry

:: Products ::

Digital Temperature Controllers	Digital Temperature Process Controller	Data Indicators
Data Loggers and Scanners	Digital Scanners	Digital Timers
Digital Counters	Solid State Relays	Sensors
Transmitters	PC Based Data Acquisition System	Signal Transmitters

Process Control Instruments & Systems

We are engaged in designing, manufacturing, marketing and exporting of various electronic process control instruments & systems. Our equipments are rugged and are popular for their user-friendly attribute. These are specially designed to work in hostile environment providing trouble free services for a very long time. With an estimated delivery lead time of twelve days, we guarantee the finest quality and reliability of our products. The spectrum of products include following:

Digital Temperature Controllers

We offer a range of digital temperature controllers that are used manage temperature of an object. It is done by measuring the existing temperature and making adjustments in ingress or egress of thermal energy to attain the preferred temperature. These controllers find usage in industries of textile, frozen products, metal, medical, and many more. Available in different sizes, these temperature controllers are offered in different models that are tabulated below:

TC 3001	Digital Temperature Controller, Single Set Point
TC 3002	Digital Temperature Controller, Two Set Point
TC 3004	Digital Temperature Controller, Four Set point
Input Type	Thermocouple	J,K, T,R,S
-	RTD	PT 100
Output Type	Electromagnetic Relays, Solid State Relay, 4 to 20 mA, 0 to 5V, 0 to 10V
Control Type	On- Off , Time Proportioning, Digital PID
Supply	230 V Ac, 50 Hz

Request for Full Specifications

Digital Temperature Process Controller

Digital temperature/process controller is one of our most acknowledged equipments. It has in-built features of dual display and timer. Salient features of the product are tabulated below:

Type of Control	ON/OFF, OFF/ON, Proportional with Cycle time/offset Variable
Set Value	Max Set Value, Alarm Constant Value Set in Configuration Mode
Display Range	Digital Calibration by end user to match with transducer
Inbuilt Timer	Timer gets actuated after process has attained the set value & shuts off the output after time lapse, with elapsed time retention in case of power failure

Different models of digital temperature/process controller, available with us are as follows:

TC-30M1	Single Set Point
TC-30M2	Two Set Point
TC-30M2	Two Set Point with Timer &Additional Output for Alarm
Input Type	Thermocouple	J,K,T,R,S&B
	RTD	Pt-100,Pt-1000
PC-30M1	Single Set Point
PC-30M2	Two Set Point
PC-30M2	Two Set Point with Timer &Additional Output for Alarm
Input Type	Transducer	4 – 20mA,0-1V,0-10VDc

Request for Full Specifications

Data Indicators

We offer a range of data indicators under series TI. These indicators are of panel-mount type and displays different parameters including humidity, voltage, temperature, pressure, current etc. The data indicators are available with us in different models; a couple of most popular ones, along with their features are tabulated below:

TI 1000	Single Point Digital Indicator, 31/2 digit, LED display, Single point analog input, optional analog output, 0.1 or 1 unit resolution
TI 1004	Digital Indicator, 41/12, digit, LED display
Input Type	Temperature	Thermocouple Type – J, K, T, R, S
		RTD PT 100
	Humidity	Polymeric Capacitance
	Voltage	AC, DC
	Current	AC, DC
	Pressure
	Strain
Supply	230 V AC, 50 Hz

Other models of data indicators include following:

TI 108 - Multi Point Indicator	Up to 8 channel analog input in one equipment
	Display of channel numbers
	Optional analog output
	Panel mount
	LED Display
	0.1 or 1 unit resolution

TI 108 - Multi Point Indicator	Up to 8 channel analog input in one equipment
	Display of channel numbers
	Optional analog output
	Panel mount
	LED Display

Request for Full Specifications

Data Loggers and Scanners

Item Code: I-Series

We offer an assortment of data loggers and scanners (I-Series) to our clients. Data loggers are the equipments that displays and logs the measured value, on basis of analog inputs accepted. The equipment also displays date and time either to a printer or a PC. Different models of data loggers and scanners are tabulated below:

M208P- Eight Channel data logger with printer and PC interface	Data logger with 8 channel, Real time clock, direct printer interface and Serial PC interface with date and time, Individual alarm setting and status on the front panel
M 332A- Multi channel data logger with native memory and PC interface	Data logger 32 channel, Expandable up to 64 channel with Serial PV Interface and local memory for logging, Real time clock, PC (Serial) interface to down load the logged values, Powerful windows based user interface software to download the logged values, analyze and report
M108P- Eight Channel scanner with PC interface	8 analog inputs, real time clock, Multi point scanner with Auto/manual scanning, Serial communication to transfer measured value and alarm status to PC, high and low individual alarm set points

Request for Full Specifications

Digital Scanners

Item Code: TS-108

We specialize in designing and developing of digital scanners in customized options, as per our clients’ specifications. It accepts inputs such as thermocouple, RTD, voltage and current. Salient features of these scanners include:

Up to 8 inputs in one equipment
Auto and manual scanning facility with programmable time interval for auto scanning (digitally set)
Channel number display
01. or 1 unit resolution
Optional RS 232 or RS 485 communication output
230 V AC 110 V Ac power supply
96 x 96 DIN enclosures

Request for Full Specifications

Digital Timers

We offer digital timers or time relay switches, where the time can be adjusted and set to active a relay after the elapsed time. These entities are displayed on the front display. We also offer universal timers (Ux 2000 series), in which time, unit of time, relay logic and mode of operation can be set by the user. Its salient features include:

Universal Time 100 ms to 99 hours (User selectable)
Power ON delay / OFF delay, interval and cyclic modes (User selectable)
Quartz crystal based accuracy
External command for start (time initiation) and reset
User programming is through digital setting via the front panel (no jumpers or dip switches)
2 change over relay output rated for 5A at 250 V AC
Front panel LED annunciation of relay status, unit of time and cyclic operation

Specifications

Power Supply - 230 V AC or 110 V AC
Display - 2 digits
Output - 2 pole 2 way relay rated for 5A at 250 V AC
Annunciation - Output status, unit of time selected and cyclic operation, through LEDs
Modes - Interval timer or cyclic timer
Start and Reset - External command
UT 2000 - DIN Rail mount
UP 2000 - Panel mount 72 x 72

Request for Full Specifications

Digital Counters

It is one of our most demanded components which find immense usage in electronic products. Widely used in automobile industry, the equipment can be customized according to the specifications provided by our clients.

Request for Full Specifications

Solid State Relays

Backed by our diligent personnel, we offer solid state relays in different models. We design and develop these relays in standard as well as custom build packages. Salient features of the solid state relays are:

Optically Isolated
Faster Switching
Output Snubber Circuit Included
High Surge Rating Allows
Led Indicator
Noiseless
Low Consumption Input
Zero Current Switch-Off
Protection Cover

Models And Specifications

SSR 16	Solid State Relay, 16A/250 V AC, Input 3 to 30 V DC
SSR 16A	Solid State Relay, 16A/250 V AC, Input 230 V AC
SSR25	Solid State Relay, 25A/250 V AC, Input 3 to 30 V DC
SSR25A	Solid State Relay, 25A/250 V AC, Input 230 V AC
SSR40	Solid State Relay, 40A/250 V AC, Input 3 to 30 V DC
SSR40A	Solid State Relay, 40A/250 V AC, Input 230 V AC

Request for Full Specifications

Sensors

We are engaged in the manufacture and export of different sensors that find application in diversified industries. The equipment can be customized according to the specification provided by our clients. Pressure sensors and humidity sensors are a couple of our demanded sensors.

Request for Full Specifications

Transmitters

Leveraging on our rich experience, we offer different types of transmitters/transducers to our clients. Transmitters take analog inputs & convert the analog value into a comparative voltage/current depending on the specific requirement. Available in isolated and non-isolated models, common features of transmitters are as follows:

Common analog inputs: temperature, pressure, humidity, flow, voltage, etc.
Common outputs: 4-20 mA, 0-20 mA, 0-10V, 0-5V and 0-1V

Different types of transducers available with us are as follows:

TTN 410 Non isolated Transducer	Accept inputs like temperature, pressure, humidity, voltage etc. Converts it into a linearised proportional analog signal like 0-10V or 4-20mA, which is normally accepted by PLC and DCS systems
TTI 510 Isolated Transducer	Accept inputs like temperature, pressure, humidity, voltage etc. and convert it into linearised proportional analog signal like 0-10V or 4-20mA, which are normally accepted by PLC and DCS systems. This model provides an optical isolation between the input and the output

Request for Full Specifications

PC Based Data Acquisition System

We develop and export PC based data acquisition system in various countries. Salient features of this system include:

Connected to external sensors through a PC based data acquisition add-on card or through the I Series dataloggers connected through a RS 485 network
With distances as long as 1 KM (expandable using repeaters) is permitted. This distance is measured from the dataloggers/sensors to the PC workstation.

For the configuration and operation of this system, we provide Data Wire, which is a user-friendly software running on Windows 32 bit platform. The following standard features are provided on the software:

Display Overview
On-line trending
Graphs
Data Logging
User changeable Labels
Alarm Annunciation
Short term trending
Historical trends
Data Exporting to other packages
Report Generation

Request for Full Specifications

Signal Transmitters

Committed to achieve maximum customer satisfaction, we offer signal transmitters and converters to our clients. Used in diversified industries, these equipments are available in different models that are tabulated below:

TT2	Two Wire Transmitter, Loop Powered
TT4	Signal Transmitter, 230 V AC operated
SI 100	Isolated Signal converters
Input:	Temperature Thermocouple, RTD Humidity Polymeric Capacitance, Any Electrical Parameter
Output:	4 to 20 mA, 0 to 10 V, 0 to 5 V, or any user specific Parameter
Supply:	23 V DC Loop Powered or 230 V AC or 110 V AC

Request for Full Specifications


	Home \| Profile \| Products \| Contact Us \| Enquiry


	Copyright © Sigma Automation (P) Limited, All Rights Reserved (Terms of Use) Developed by IndiaMART InterMESH Limited