Simran Industries

Vice Body made of High tensile closed grain Cast Iron.

Steel Jaw Plates are ground and Hardened to 50-60 HRC.

Base can be Swiveled through 360° and Vise tilted through 90°.

Vice can be locked positively at various compound angles.

Two Oil Holes provided on Vice Body.

Ideal Vice for Milling, Grinding, Shaping, Drilling and Jig boring.

Blade is Blacked.

For use on inside or outside corners for perfect layout.

Latest improved design for mass production and lower maintenance cost.

Machines are fitted with two hoppers, one feeds the rivets and second feeds the nails.

The function of the machine is to fit the nails into the rivets.

These machines are very simple in operation, with latest improved design for mass production and lowest maintenance cost.

New design knock out system helps to produce flange bolts and reducing the studs.

The maximum parts of the machines are ground and all the Cames and Rollers from H.C.H.C. (Hardened & Ground ).

These cold heading machines are fully automatic and easy to operate with little training, fitted with Solid Die to produce blank for Bolts, Screws, Rivets and other similar components. Cut off and knock out mechanism have safely devices that will stop any major accident if any abnormal function occurs in machines.

A positive knock out provision had been made on the 1st and 2nd punches to eliminate the possibility of parts sticking to these punches during the operations. The maximum parts of the machines are ground and all the Cames and Rollers from H.C.H.C. ( Hardened & Ground ).

Model SICH-B5 & SICH-B6 equipped with Pneumatic Clutch & Automatic Centralized Lubrications systems provides sufficient quantity lubricating to all bearing surface.

These machines are suitable to produce round, hex, flange nuts and other similar components. For trouble free running of the machines the automatic centralized lubrication system provides adequate quantity of lubricant to all bearing surface.

The shortest die to die distance is a basic condition for high speed production because the shortest distance takes the lease time for the movement of transferring.

The transfer shaft is precisely made, while the transfer finger is automatic aligning with the punch and die.

Increased productivity at lower operational cost and man power.

High speed Wire Nails Making Machines are made from graded casting, the main crank shaft and side shafts are from alloy steels.

Designed for high production and lower maintenance cost.

The nails produced by these machines are accurately centered from the head and sharp at the point.

Best Quality TRY SQUARE with Brass Faced Polished Wood Stock.

Chemically Blacked Steel Blade Fixed with Three Brass Rivets.

Precision In Accuracy.

Used for Producing Center holes in Components or Workpieces which require machining between Centers.

60° Countersink Angle fits all Standard Centers.

Plain Type available in 60°, 82° or 90° Angle, also available with Standard and Long Lengths.

Made from High Speed Steel.

Fully Hardened and Black Finish.

Made from quality steel, hardened, ground and Cutting edge is 35 HRC.

Body round and knurled for better gripping with Black Oxidised finish.

Also available in different attractive colours with Powder Coating.

Sets can be supplied as per requirements.

Hardened sticks of punches, in black finish are packed in plastic boxes.

Number set consist 0-8 (9 Sticks). No. 6 is inverted to make No. 9. Letter Set consist A-Z and & (27 sticks).

Combination Set consist 27 Letters & 9 Numbers ( 36 Sticks).

Moderately priced.

Designed for Machine Shop.

Set Consists of Two V-Blocks and Two Clamps.

Made from Polished Wood .

Single Hardened marking Spur.

Plastic Turn Screw.

Body and Jaw of solid all steel Construction and Case hardened.

Slotted sides provide multitude of clamping possibilities.

Locking Screw provided at the Vice base for adjustable positions of the moveable Jaw.

We manufacture Cold Roll Forming Machines for Making following False Ceiling Sections (Gypsum Board), Metal Ceiling Sections, P.O.P. Ceiling Sections, Pre Feb Sections, Partition Sections.

Accurately and quickly locates center on round workpiece.

For execution place the tool in drill chuck or collet and line up pointer with line scribed on shaft.

Supplied with instructions.

Available in Carbon Steel & H.S.S.

With accurately cut threads.

Made of Hardened Steel.

Precision Ground on all sides.

Moderately priced.

Hardened and Precision Ground Steel Vice.

Positive download and rapid positioning notches for free Jaw movement.

Threaded hole on both sides of stationary Jaw.

Horizontal and vertical V in moveable Jaw.

Made from Hardened alloy steel.

Single Piece construction with V-grooved Jaws.

All surface including Jaws and base are precise ground square and parallel.

Clamping slots at the bottom easily affix to angle plates, etc.

Fabricated Sheet Handle.

Size Adjustable to 250 MM & 300 MM.

These sets are fast effective way of locating the Working centre on lathes, bench drills and milling machines.

Hardened steel points and contacts ensure accurate location.

The four attachments snap fit into the chuck without removing the collet nut and reducing down time. 5 pieces set imperial ( Chuck with 4 arms ).

Comes in attractive plastic pouch.

Precision Ground to Master Gauges.

Guarantee finest possible accuracy & fit.

Individually Packed.

Available in Soft type & Fully Hardened Type.

Automatic Hopper Feed Nut Tapping machines are most economical for Tapping machines or pressed Hex.

Nuts of good quality.

The machines are designed with best technique and the breaking of taps are app. eliminated.

Most up-to-date yet simplest design and robust construction ensures precise performance, easy operation and higher productivity. The materials used in these lathes are only selected ones and machines are manufactured strictly on quality basis to give long trouble free service. Every machine guarantees a precision and economic working and cuts cost ultimately.

These machines are designed for mass production and lowest maintenance cost.

Suitable for threading bolts, automobile parts and other similar components.

Two flats dies used in these machines, which easily fitted and adjusted.

Made from high speed steel with 5% Cobalt.

These machines are improved in design for High Production and takes minimum set-up time.

The slot by these machines are accurate, deep and curved at the bottom.

Compact and Versatile Comparator Stand.

Rugged Enamelled Cast Iron base.

Rust Proof chrome plated Pillar at right angle to the base.

Hardened and Precise ground Anvil.

Provided with fine Adjustment Knob for Zero Setting.

Suitable for all dial gauges including 3/8" and 5/16" dia stem.

Base Dimension : 6" x 4" (150 x 100mm).

Pillar diameter : 1" (25.4 mm).

Supplied without Dial Gage.