Have a requirement?
Chat with us
Have a requirement?
Chat with us
Nature of Business
Wholesale TraderTotal Number of Employees
Upto 10 PeopleYear of Establishment
2020Legal Status of Firm
Individual - ProprietorAnnual Turnover
Rs. 2 - 5 CroreGST Number
37BINPG0214N2Z53hp Long Arm Type Paddle Wheel Aerators
Get Latest Price
- Arcuate Bevel Gear made with chromiummanganese- titanium with carbonitriding on surface, saves 20% more electricity.
- 36.3% higher oxygen transfer capacity than Industry Standards.
- Stainless Steel SS-304 shaft & frames.
- Mechanical seal against oil leakages.
- Made with virgin HDPE.
- Nylon impellers.
View Complete Details
Swell Aerators For Vannamei Shrimp Culture Ponds In India
Get Latest Price
Swell Aerators unique wave function greatly improves the contact area between air and water for better algae photosynthesis and to avoid Nh3, Nitrite to maintain overall pond health. Waves function gives a better dissolved oxygen ratio and maintain the lower and upper pond temperature.
Technical Specifications:
Model | Power KW | Voltage V150Hz | Power Efficiency Kg/KWh | Water lifting capacity m3/h | Loading Area | Weight kg |
YLZI.5 | 1.5 | 415 | 1.5 | 2.74 | 6-8 | 40 |
YLZ0.75 | 0.75 | 415 |
View Complete Details
2HP 6 Wheel Paddle Aerator In India
Get Latest Price
Aeration Devices
The following are the most common methods for introducing oxygen through aeration.
Paddle wheels
Paddlewheels are just as they sound, a shaft with blades that is spun by a motor or a PTO from a tractor. As the blades spin, they enter and exit the water and splash the surface. Paddlewheels have come a long way in the past 10 years. Past designs had inherent problems that caused premature wearing of the gear boxes. New designs have better balancing and less wear. A note of caution, most imported motors have a spline shaft that does not match up with American-made motors and can cause repair difficulties.
- Most efficient surface aerator
- Can cause directional flow while aerating
- Will not be efficient in deeper ponds
- Units are typically bulky and not very portable
View Complete Details
2Hp Wheel Taiwan Pond Farming Aerators
Get Latest Price
Aeration Devices
The following are the most common methods for introducing oxygen through aeration.
Paddle wheels
Paddle wheels are just as they sound, a shaft with blades that is spun by a motor or a PTO from a tractor. As the blades spin, they enter and exit the water and splash the surface. Paddlewheels have come a long way in the past 10 years. Past designs had inherent problems that caused premature wearing of the gear boxes. New designs have better balancing and less wear. A note of caution, most imported motors have a spline shaft that does not match up with American-made motors and can cause repair difficulties.
- Most efficient surface aerator
- Can cause directional flow while aerating
- Will not be efficient in deeper ponds
- Units are typically bulky and not very portable
View Complete Details
Impeller Aerators
Get Latest Price
Aeration Devices
The following are the most common methods for introducing oxygen through aeration.
Fountain Type
These units shall be defined as any device that splashes the water into the air to create an aesthetically pleasing display. There is a wide range of fountains on the market. Some are designed more for display than aeration and some that mix more aeration with the display. When looking at Kasco's equipment, these models are known as Aerating Fountains.
- Can have beautiful displays and add beauty to the body of water or pond
- Some aeration benefit is seen
- Works fairly well in small ponds that are relatively shallow
- Very good at venting off unwanted gases
- Typically will only draw water from the surface to 10'
- Not as efficient at aeration because energy is used to create the display
Wind Aerators/Circulators
Wind powered units will either drive a small compressor that pushes air to a diffuser membrane or will be connected to some type of paddle that enters the water and moves as the wind blows.
- No electricity is required so they can be used in remote areas
- Visually pleasing piece of equipment
- Will not work in no-wind conditions
- Not portable and installation time makes it necessary that the right installation point is decided the first try
- Will not work when they are needed most in the lazy, hazy days of lat summer with little to no wind and overcast skies
Vertical Pump Surface Agitators
These units will employ a float, motor, and prop to splash water at the surface. When looking at Kasco equipment, these models are known as Pond Aerators.
- Ideal for smaller ponds
- Fairly decent oxygen transfer rate
- Portable and lightweight
- Inexpensive for the water movement
- Not as efficient at moving water at depths greater than 10'
Paddlewheels
Paddlewheels are just as they sound, a shaft with blades that is spun by a motor or a PTO from a tractor. As the blades spin, they enter and exit the water and splash the surface. Paddlewheels have come a long way in the past 10 years. Past designs had inherent problems that caused premature wearing of the gear boxes. New designs have better balancing and less wear. A note of caution, most imported motors have a spline shaft that does not match up with American-made motors and can cause repair difficulties.
- Most efficient surface aerator
- Can cause directional flow while aerating
- Will not be efficient in deeper ponds
- Units are typically bulky and not very portable
Horizontal Aspirators
These units employ an above water level motor, extended shaft, propeller, and draft tube to suck in air. They can be adjusted to point the propeller in several angles.
- Cause directional flow to address dead spots
- The ability to angle the prop into the water makes these units more effective at moving water in deeper ponds
- Oxygen transfer is not quite as good as other devices
- Some units have premature failure in the area of the extended shaft
Horizontal Prop Units
These units operate similar to aspirators without the extended shaft nor do they suck air. You can position them to point in any direction and angle them similar to an aspirator. When looking at Kasco equipment, these are known as Water Circulators.
- Excellent for causing water movement
- Great for keeping ice off ponds and preventing winter kills
- Can be mounted at variable water depths and can mix deep water
View Complete Details
Deep Jet Injector Submersible Aerators
Get Latest Price
Major Function:
- Improved Water Quality
- Algae Reduction
- Enhanced Fish Health & Growth
- Reduction of harmful dissolved gases
- Water Clarity and Odor
View Complete Details
Jinhulong Paddle Wheel Aerators
Get Latest Price
As examined by the National Fisheries Machinery and instrument Quality Supervision and inspection Center in July 2009, JINHULONG Paddle Wheel Aerator has all the nine indices up to the requirements provided in the industrial standards SC/T6017-1999, wherein the Oxygen transfer rate is 2.59 kg/h, 36.3% higher than the standards, Power efficiency is 1.71kg/kW.h, 36.8% higher than the standard, with significant effect of sewage discharging at the middle and bottom off upland Aquaculture pond.
Product Advantages- Arcuate Bevel Gear made with chromiummanganese- titanium with carbonitriding on surface, saves 20% more electricity.
- 36.3% higher oxygen transfer capacity than Industry Standards.
- Stainless Steel SS-304 shaft & frames.
- Mechanical seal against oil leakages.
- Made with virgin HDPE.
- Nylon impellers.
View Complete Details
Pond Paddle Wheel Aerators
Get Latest Price
As examined by the National Fisheries Machinery and instrument Quality Supervision and inspection Center in July 2009, JINHULONG Paddle Wheel Aerator has all the nine indices up to the requirements provided in the industrial standards SC/T6017-1999, wherein the Oxygen transfer rate is 2.59 kg/h, 36.3% higher than the standards, Power efficiency is 1.71kg/kW.h, 36.8% higher than the standard, with significant effect of sewage discharging at the middle and bottom off upland Aquaculture pond.
Product Advantages- Arcuate Bevel Gear made with chromiummanganese- titanium with carbonitriding on surface, saves 20% more electricity.
- 36.3% higher oxygen transfer capacity than Industry Standards.
- Stainless Steel SS-304 shaft & frames.
- Mechanical seal against oil leakages.
- Made with virgin HDPE.
- Nylon impellers.
View Complete Details
need
details