Laboratory Instruments

Digi Stable Therm Lab Ovens
Double walled construction inside of with Mild Steel / Aluminum /Stainless steel. Outside made of MS with powder coating of pleasing color. A 50 mm thickness of glass wool insulation in the Oven prevents any heat loss thus giving very accurate temperature inside the chamber. The oven has forced air circulation and a micro controller PID digital indicating Controller to maintain the temperature inside the chamber very accurately and uniformly.

Specifications:

Temperature Range:
5°above ambient 200°C or 250°C or 300°C

Accuracy: +/- 2°C throughout the range

Ordering Information :

Model - SLI 106

H	W	D
a. 300 mm	X 300 mm	X 300 mm
b. 450 mm	X 450 mm	X 450 mm
c. 600mm	X 600 mm	X 600 mm
d. 600 mm	X 450 mm	X 450 mm

Note : The above ovens are supplied with cirmpnet GI trays as standard accessories Aluminumn and SS trays supplied at extra cost.

Digi Stable Therm Baths
1.Double walled construction inner of polished SS-304 and outer made of MS painted in attractive color and provided with SS pyramid lid and SS Kahnracks or Drop on lid with holes having concentric rings.

2. Completely in SS-304 with circulating pump, heater, sensors & a PID digital controller to control the temp any bath from -50 ⁰ C to + 400 ⁰ c .

Specifications :
Temp Range : 5°C above ambient to 65°C.
Accuracy       : +O.5°C with Electronic Digital Indicating Controller.

Ordering Information:

• 250mm x 150mm x 150 mm SS chamber, pyramid lid and two
  SS Kahn racks and Electronic Digital Indicating Controller.
• Same as (a) but with stirring arrangement to give gradient free temp.

Model - SLI 113

• 375mm x 250mm x 150 mm SS chamber, pyramid lid and four SS Kahnracks and Electronic Digital Indicating Controller.
• Same as (a) but wth stirring arrangement to give gradient free temperatll"e and Electronic Digital Indicating Controller.

Model - SLI 114

• 300mm x 250mm x 125 mm SS chamber, drop-on-Iid having 6 holes with concentric rings and Electronic Digital Indicating Controller.
• Same as (a) but with stirring arrangement to give gradient free temp.

Model- SLI 115

• 400mm x 300mm x 125 mm SS chamber, drop-on-lid having 12 holes with concentric rings with Electronic Digital Indicating Controller.

• Same as (a) but with stirring arrangement to give gradient free temperature.

Baths of other sizes including GMP Models can be supplied with any specifications as desired.

Digi Stable Therm Oil Bath

Double walled construction with inside of polished SS and outside of MS painted in pomer epoxy of pleasing color. The bath is provided with 75 mm thermal insulation and a drop-on-lid of SS to reduce heat loss. The bath has SS heater for quick boosting and control of temperature. A close loop circulating pump arrangement circulates the heated media to maintain gradient free temp throughout the bath.

Digi Stable Therm Lab Incubator
Double walled construction with inside of aluminum / stainless steel. Outside is of MS with powder coated. The incubators have double doors having a full view acrylic door to see the sample under test. The outer door is double walled, well insulated having handles & locks. The Incubator has forced air draft system, a micro controller digital controller to give accurate & uniform temperature throughout the inner chamber.

Specifications:

Temperature Range: 5°above amb. to 60°C

Accuracy: ±0.5°C

Ordering Information :
Model-SLI 101

H	W	D
a. 350 mm	X 350 mm	X 350 mm
b. 450 mm	X 450 mm	x 450 mm
c. 600 mm	X 600 mm	X 600 mm
d. 600 mm	X 450 mm	X 450 mm

Note : The above incubators are supplied with crimpnet GI Trays as standards accessories. Aluminum and SS trays are supplied at extra cost.


Digi Stable Therm Bod Incubator:

The unit has inner chamber of SS-304 outer made of MS duly painted. Inner chamber has a full view acrylic door. The outer door is of double walled having SS inside.

The cooling system is placed at the bottom of the unit having hermetically sealed compressor & its accessories.

The inner chamber has rod trays, that are adjustable. The temperature controller & the blower are provided at the top of the instrument for ease of operation.

The optimum desired temp. is achieved through pt-100 sensor, Digital Indicating Controller and the blower that sucks the air at the top of cabinet and discharges it across the cooling coil where by ensuring uniformity of temp. in the working chamber.

Specifications:
Temperature Range: 10°C to 60°C
Accuracy: + 0.5°C

Ordering Information :

Model-SLI 102
a. 90 liters or 3 cubic feet
b. 170 liters or 6 cubic feet
c. 285 liters or 10 cubic feet
d. 340 liters or 12 cubic feet

Digi Stable Therm Lab Autoclave
Triple walled construction with inner, outer chambers and the jacket of autoclave are completely in stainless steel duly polished.

The autoclaving chamber does not have any heaters at the bottom thus giving more space in the chamber for the sample. The inner chamber is provided with ports at the bottom and for the steam to enter from the jacketed portion of the autoclave.

The heaters are located at the bottom of the jacket and the water enters the jacket immersing the heaters. The steam generated enters working chamber through the ports. The lid of the autoclave is made from a single thick SS plate duly polished. The lid contains pressure gauge and two safely valves for the release of the steam. The release valves are set at a pressure between 16-18 psiand the second between 20-22 psi. This enables one to prevent any damage due to excessive pressure development because of the failure of one safety valve.

The autoclave has gauge glass to indicate water level, water inlet funnel, water release valve and steam release valve.

Model -SLI 104

a. 300x300mm Ht single walled SS autoclave with one seamless basket.
b. 300X500mm ht. Triple walled construction made of SS autoclave with 2 seamless SS baskets
c. Same as (b) but with automatic timer, pressure regulator arrangement
d. 400x600mm ht. Triple walled jacketed completed made of ss with two seamless SS basket.
e. Same as (b) but with automatic timer, pressure arrangement
f. Autoclave of any other size and with foot lifting arrangement, Electronic Digital temperature Indicator, Electronic, Water Level Indicator etc. could be provided on request.
g. A new model for Accelerated Autoclaving which is working at 30 psi both electrically & gas operated.
h. Double wall autoclaves of any size can be provided.

Digi Stable Therm Vacuum Oven
Double walled construction inside of stainless steel and outside of mild steel painted with pleasing color. The door is made of aluminum casting with a toughened glass window. The vacuum Oven has Bourdon type vacuum gauge, vacuum cock and air inlet cock.
Heating of vacuum Oven is done by clamp-on type electric heaters fitted on the outside of the inner chamber.

Control : Temp. is controlled by PID Digital Micro Controller Indicating Electronic Controller.


Specification:

Temp. Range :60°C to 130°C or 200°C
Accuracy : +1°C throughout maximum Vacuum can withstand 760mm of hg.

Order Information

Model - SLI 108
a. 225mm dia x 300mm depth
b. 425mm diax 300mm depth
c. 300mm ht x 300 depth x 300mm length (rectangular)

Double vacuum oven completely in SS as per GMP can be supplied.

Digi Stable Therm Muffle Furnace
The furnace is provided with high grade similitude muffle enclosed in mild steel box painted in pleasing colour. The furnace is provided with special quality light ceramic fiber wool insulation to reduce the weight of the furnace thus saving of electricity consumption.

The furnace has built-in PID microcontroller Digital Indicating Controller with CR/AI Thermocouple. The furnace has lamps to indicate mains and control action. The furnace incorporates an electronic fuse to prevent damage of muffle in case of any failure in the control system. The coils used are of high grade Kanthal wire.

Specification :

Temp Range: 50°C to 1100°C
Accuracy: + 2°C throughout the range
Control : Micro controller PID digital Controller with electronic fuse.

Ordering Information

Model - SLI 110

 

a.	230mm   x	100mm   x	100mm
b.	250mm   x	125mm   x	125mm
c.	300mm   x	150mm   x	150mm
d.	450mm   x	230mm   x	230mm

Digi Stable Therm Melting Point Apparatus
The Instrument comprises of a jacketed oil bath made of corning glass fitted with Teflon lid magnetic stirrer with Teflon paddle, linearised Digital temp. Indicator light lens assembly etc. The instrument also has provision to measure boiling point of the sample.


Specifications:
Temp. Range : 0⁰ to 350⁰ c
Accuracy : + 1⁰ C

Ordering Information

Model - SAI 123

Magnetic Stirrers With / Without Motors :
We offer Lab Magnetic Stirrers with Motor and Motor less types to be used in the labs.

We can give in the standard capacity of 1, 2, 5 & 10 liters. We can also give you Hot plate magnetic stirrers of the above capacity.

Motor Less Flux Stirrers

Ordering Information :

Model SLI - 126 Moter less
 a) 2 liters b) 5 litrs. c) 10 litrs                

SLI - 127 With Motor
a) 2 liters b) 5 litrs. c) 10 litrs       

SLI -128 Stirrers with hot plate
   a) 2 liters b) 5 litrs. c) 10 litrs

Auto Potentiometric Titrator is used for titration involving acid and alkali, oxidation reduction, aqueous and non-aqueous and any other Potentiometer titration. In this titration, initially reading changes in increasing magnitude and the end point is determined by the sudden permanent change in the potential difference on the digital display. End point is also detected on front panel to adjust zero reading, rate of addition & delay.

Ordering Information:

Model - SAI 124

The unit is completly in SS-304 as per GMP norms, has Wolf Hogle Plate, 4 Digit Counter and background light. The colonies can be counted by means of ordinary felt pen with micro switch.

Specification :

4 digit Electronic counter to read 9999
Accuracy: 1 digit
Ordering Information :

Model - SAI 126

Accu pH pH Electrodes
Features:-

• General purpose gel filled electrode
• Unbreakabeneral purpose gel filled electrode
• Unbreakable poly carbonate body
• Triple junctionle poly carbonate body
• Triple junctional

Specifications:

Measuring pH                0 to 14 pH
Temperature Range     0 to 80 ºC
Shaft Material                Epoxy Plastic
Liquid Junction             Porous Ceramic
Reference Junction      Triple Junction
Reference Type            Ag/AgCl Sealed
Shape of Membrane     Sphere
Shaft Length                    110 mm
Diameter                          12 mm
Response Time              95% within 10 Seconds
Reference Electrolyte    3 Molar KCl
PH Bulb                            Full Range Low Impedance
Connector                        BNC
Impedance                     <100 Mega Ohm
Cable                               Ultra Low Noise Cable
Cable Length                   1 mtr
Accuracy                         +/-0.1% over full range
Life Expectancy               5 Years

Labfur island table metal. Island benches are manufactured with M. S. Frames, G. I sheets duly powder coated. The innovative island bench accommodate up to eight people to do experiment at the same facing on both side. The table top is made of granite/ epoxy resin or phenolic resin which resists heat, water, most chemicals and corrosion. Partitions of the shelf make the equipment and tools easy to display. Meanwhile, the laboratory table leads the convenience for people both side to get things on the shelf. The modules are so designed that they can be fitted either to the pedestal system or the flexible system with considerable ease. Drawers & shutters are with S. S. Or brass handle.

Digi stable therm rect vacuum oven. Our clients can avail high quality Rectangular Vacuum Oven from us. With the use of advanced engineering concepts and updated machines, our manufacturing team produces this product ensuring that they provide ease of installation, high accuracy and optimum performance. This product is available at the most reasonable prices as compared to other companies.
Construction:

* Double body
* Heat treated toughened glass window
* Clear viewing of samples
* Silicon gasket and positive door latch
* Tight seal at all vacuum levels
* Maximum vacuum up to 760mm of mercury
* A vacuum type stop cock and vacuum gauge are fitted on the top
* Electrically operated on 230 V AC, 50 Hz supply

Horizontal high processor standard controls
Rectangular autoclave
Vertical autoclave
Multiple operating valve : to carry out all functions of sterilization cycle at one point i.E. Steam to
Jacket, steam to chamber, fast/ slow exhaust and vacuum/ drying.
Door : single door shall be fitted with radical shooting arm, provided with automatic pressure locking
device so that the door can not be opened till chamber pressure is fully exhausted.
Quick vacuum drying apparatus : this allows the filtered and sterilized air to break the chamber
vacuum & helps in quick-drying.
Accidental vacuum breaker : a safety device so jacket against accidential vacuum in it and to
remove residual air from it.
Safety valve : a safety device against excess pressure in jacket and steam generator.
Dial type thermometer : indicates sterilization temperature.
Plug screen : a device to prevent chamber, discharge line from lint 

Digi PH lab & flux stirrre

We are engaged in  Manufacturing supplying a wide range of Laboratory Instruments, which is procured from reliable vendors such as Thermo Fisher, IKA, Hanna, Remi, Eutech, Veego, Bio Technics, Electronics, Dhona, Shimadzu and Orion. These instruments are widely demanded in diverse industries such as sugar, paper, pharmaceuticals, testing instruments and glass-wares. Some of the laboratory instruments offered by us: 
* Liquid handling instruments
* Microscope
* Hot plate
* Oven
* Centrifuge
* Heating mantle
* Vacuum pump
* Water bath
* Karl fisher titration apparatus
* Filtration assembly
* Distillation assembly
* Finpipette
* Incubator
* Water Still
* Furnace
* Autoclave
* Waterstill
* pH meter
* Turbidity meter
* Refractometer
* Spectrophotometer
* Stirrers
* Balances
* Fume Hoods
* Oil, paint testing

Digi stable therm furnace, vacuum oven.

• We are also into manufacturing of Vacuum Oven, which are used for heating at very high temperatures in the absence of air. These ovens come with Double walled obstruction with outer wall made up of Mild Steel, while the inner one manufactured from stainless steel. The insulated glass wool enclosure consisting of a solid aluminium door with glass window of 155mm diameter ensures better heating performance. The exterior parts are painted with powder coating paints and are clamped on to the outside of the inner chamber. These are especially designed to make long lasting electric heaters operating at very low costs.

 

Digi stable therm incubators

•     We are instrumental in producing a world-class collection of laboratory incubators that is fabricated using premium quality laboratory incubators. Entire process of development is strictly checked by our team of professionals. It finds usage in various applications such as biochemical studies, hematological studies, general purpose incubator applications, bacterial culturing and research, microbiological determinations, pharmaceutical stability assays, food processing quality control, large scale roller apparatus applications. 

Digi orbital shaker

We hold the expertise in manufacturing a wide range of orbital & incubator shaker. Our ranges of products are manufactured using superior grade raw materials and components. These specialty incubators are constructed with impact-resistant housing. It is one of the standard equipment known for its maintenance-free nature and continuous operation. Moreover, it is efficient to work under varying temperature. Our incubator is widely used for its quality and cost competence.

Digi wrist action shaker

We provide our customers with DC motor driven wrist action shakers. These are widely used by our customers for various laboratory testing purposes. The shakers have been designed as per the requirements of the customers and can move at 45 degree side to side angle. Owing to the MS powder coated cabinet, the shakers are of superior strength and durability.
 
Some of the key specifications of the Wrist Action Shakers are:
  
* Speed: 0 - 60 RPM
* Capacity: 4 1 liter. flask
* Movement: 45 degree Side to side
* DC motor driven
* Cabinet: MS powder coated

The various benefits of the wrist action shakers are:
  
* Reasonable cost
* High performance
* Reliable
* Durable

Digi temp controller
Digital Temperature Controller

RMS controls serves a digital temperature controllers with high accuracy and different functions such as with proportional band or ON/OFF types. Ideal for most precision temperature control processes in laboratories, R&D applications and precision engineering industries. Output of the controller can be provided through potential free relay contacts or solid state relay.

Control mode: Proportional band or ON/OFF                           Types are available.
Salient Features : Input Sensors K, J, R, S &                           PT 100 Range Upto 1700ºc.
Input Power Supply : 230 V AC or 12V, 24 V

Digi melting point apparatus

Melting Point Apparatus are supplied by us and we also provide installation service to our clients. Our products can effectively examine the bio availability and helps to develop the dose. These products are widely demanded in pharmaceutical labs for research and controlling the quality. We supply apparatus which are demanded for their accuracy, easy operation and temperature controller.
 
  Salient Features:
* Extremely useful for Pharmaceutical labs
* Highly Accurate and easy to operate
* High stirrer speed accuracy
* Accurate temperature control