IndiaMART.com
Sonipat, Haryana
Products & Services

Products

We are leading Manufacturer for the Products which also includes Drawing And Dimensions (For Ansi 150 Flange) & Drawing And Dimensions (For Ansi 300 Flange) since 2009

Drawing And Dimensions (For Ansi 150 Flange)

Drawing And Dimensions (For Ansi 150 Flange)

All dimensions given in inches.
Dimensions and tolerances in accordance with ANSI B16.5.
Carbon steel flanges mechanical properties and chemistry conform to ASTM A105.
Flanges are furnished faced, drilled and spotfaced or backfaced.
*1/16 in. raised face included in dimensions Q, Y and YY.
**Bolt hole diameter 1/8 in. larger than bolt diameter.

Product Code: 641

Drawing And Dimensions (For Ansi 300 Flange)

Drawing And Dimensions (For Ansi 300 Flange)

All dimensions given in inches.
Dimensions and tolerances in accordance with ANSI B16.5.
Carbon steel flanges mechanical properties and chemistry conform to ASTM A105.
Flanges are furnished faced, drilled and spotfaced or backfaced.
*1/16 in. raised face included in dimensions Q, Y and YY.
**Bolt hole diameter 1/8 in. larger than bolt diameter.

Product Code: 249

Drawing And Dimensions (For Ansi 400 Flange)

Drawing And Dimensions (For Ansi 400 Flange)

All dimensions given in inches.
Dimensions and tolerances in accordance with ANSI B16.5.
Carbon steel flanges mechanical properties and chemistry conform to ASTM A105.
Flanges are furnished faced, drilled and spotfaced or backfaced.
*1/4 in. raised face included in dimensions Q, Y and YY.
**Bolt hole diameter 1/8 in. larger than bolt diameter.

Product Code: 281

Drawing And Dimensions (For Ansi 600 Flange)

Drawing And Dimensions (For Ansi 600 Flange)

All dimensions given in inches.
Dimensions and tolerances in accordance with ANSI B16.5.
Carbon steel flanges mechanical properties and chemistry conform to ASTM A105.
Flanges are furnished faced, drilled and spotfaced or backfaced.
*1/4 in. raised face included in dimensions Q, Y and YY.
**Bolt hole diameter 1/8 in. larger than bolt diameter.

Product Code: 184

Drawing And Dimensions (For Ansi 900 Flange)

Drawing And Dimensions (For Ansi 900 Flange)

All dimensions given in inches.
dimensions and tolerances in accordance with ansi b16. 5.
carbon steel flanges mechanical properties and chemistry conform to astm a105.
flanges are furnished faced, drilled and spotfaced or backfaced.
dimensions for class 900 flanges, sizes nps 1/2 through 2-1/2, are same as class 1500 flanges.
*1/4 in. Raised face included in dimensions q, y and yy.
**bolt hole diameter 1/8 in. Larger than bolt diameter.

Product Code: 309

Ring Heated

Ring Heated

We offer high quality ring heated

Product Code: 92

Flanges

Flanges

We offer high quality Flanges

Product Code: 57

Flanges Big

Flanges Big

We use quality tested raw materials to manufacture forged flanges. These flanges are used in various industries including engineering, automobiles and heavy industries. The product is known for its robustness and durability.

Product Code: 60

Steel Ring

Steel Ring

We offer high quality Steel Ring

Product Code: 105

Steel Ring

Steel Ring

We offer high quality steel ring

Product Code: 90

Flanges Steel

Flanges Steel

We offer high quality flanges steel

Product Code: 91

Seamless Forged Rings

Seamless Forged Rings

The production of seamless forged rings is often performed by a process called ring rolling on rolling mills. These mills vary in size to produce rings with outside diameters of just a few inches to over 300" and in weights from a single pound up to over 300,000 pounds.

The process starts with a circular preform of metal that has been previously upset and pierced (using the open die forging process) to form a hollow "donut". This donut is heated above the recrystallization temperature and placed over the idler or mandrel roll. This idler roll then moves under pressure toward a drive roll that continuously rotates to reduce the wall thickness, thereby increasing the diameters (I.D. and O.D.) of the resulting ring.

Seamless rings can be produced in configurations ranging from flat, washer-like parts to tall, cylindrical shapes, with heights ranging from less than an inch to more than 9 feet. Wall thickness to height ratios of rings typically range from 1:16 up to 16:1, although greater proportions can be achieved with special processing. The simplest, and most commonly used shape is a rectangular cross-section ring, but shaped tooling can be used to produce seamless

Product Code: 112

Also Deals In

  • Alloy Steel Ring
  • Flanges Small
  • Dimensions

To,SK Forging

Promote Your Business with IndiaMART
Enter Your Website URL
RELATED COMPANIES